Flexvent Pro Automatic Air Vent

Pro‑Sprinkler range

The Pro range consists of 2 permanently installed refill products for commercial systems of different sizes. They can be used to fill the system and to refill water losses from the system (top up/refill). They have an LED conductivity indicator and a Fill Combi (backflow preventer, pressure reducer and pressure gauge) as standard. There are two sizes (9.5 and 23.0 liter bottle) for the SpiroPure Pro (fixed filling).

The Pro GLT range consists of 2 permanently installed refill products for commercial systems of different sizes. They can be used to fill the system and to refill water losses from the system (top up/ refill). They have an LED conductivity indicator and a FillCombi (backflow preventer, pressure reducer and pressure gauge) as standard. There are two sizes (9.5 and 23.0 liter bottle) for the SpiroPure Pro (fixed filling).

Robot Compact Pro steel manifold

Silent Pro pipes and fittings of Geberit

Monobloc air‑water inverter heat pump (R290)

Control for commercial and residential monobloc heat pumps.

Composite Premium Pro W510 Manifold

Monobloc air‑water inverter heat pump (R290)

Silent‑Pro combined corner branch fitting 87.5°, swept‑entry, right

Indirectly fired boiler

Silent‑Pro parallel branch fitting 45°

Robot Optimum Flow Pro steel manifold

Composite Premium Pro District 926 Manifold

Silent‑Pro duct branch fitting 87.5°, swept‑entry, right

Silent‑Pro combined corner branch fitting 87.5°, swept‑entry, left

Silent‑Pro duct branch fitting 87.5°, swept‑entry, left

Robot District Heating Pro steel manifold

Composite Premium Pro Separated 926 Manifold

Silent‑Pro combined branch fitting 87.5°, swept‑entry

Flat plate collector

System pro E power Top Busbar System switchboard

System pro E power Top Busbar System switchboard – capacitor bank application

System pro E power 2x Top Busbar System switchboard + Corner Structure

Air conditioner, Single split outdoor unit Outdoor unit must be combined with indoor unit VAIB1‑... WNI with the same cooling capacity.

Synthetic manifold that can be assembled modularly

Air conditioner, indoor unit Indoor unit must be combined with outdoor unit VAIB1‑…WNO with the same cooling capacity.

Indirect/Buffer tank

Gas boiler Power availability 80, 120, 160 and 200 kW

BottomTurn bend

Gas boiler, execution left Available output 285, 355, 430, 500, 575 and 650 kW

BackFlip bend

Gas boiler, execution right Available output 285, 355, 430, 500, 575 and 650 kW

High efficiency wall hung gas boiler

Gas boiler Available output 570 KW, 710, 860, 1000, 1150 and 1300 kW

Gas condensing boiler cascade system

Gas condensing boiler cascade system

Gas condensing boiler cascade system

Connector sets from Remeha

Synthetic manifold (blue, green, red) that can be assembled modularly

Boilers by Remeha

The ProFill range consists of 2 refill products for commercial systems of different sizes. These products are not permanently fitted to the system. They are used to fill the system and then removed. To top up the water in the system (refill/top up), you should use one of the permanently installed filling products (SpiroPure Home / Pro). There are two sizes for the SpiroPure ProFill (Mobile Filling) (9.5 and 23.0 liter tank).

Plant room equipment by Flamco

KE KELIT KELOX PROTEC

KE KELIT KELOX PPSU‑W

KE KELIT KELOX PPSU

KE KELIT KELOX ULTRAX

The ProClean range consists of 2 treatment and cleaning products for commercial systems of different sizes. The mobile products can be used for conditioning and cleaning in the by‑pass. They are temporarily installed in an existing system where they can remove impurities from the system and treat the water to the desired level.

Profipress Crossover with SC‑Contur, copper, plug‑in end, press connection Components EPDM sealing element Model 2427

Profipress Crossover with SC‑Contur, copper, press connections Components EPDM sealing elements Model 2428

Profipress G Wall plate with SC‑Contur, gunmetal, press connection, Rp‑thread Components HNBR sealing element, fixing flange Model 2625.5

Viega Profipress G

Fire protection

Profipress copper pipes and fittings by Viega

A frost‑proof outside tap prevents the pipe freezes in cold weather.

Profipress G mounting unit with SC‑Contur, for double‑pipe gas meter, inlet/outlet: brass ball valve with Profipress G connection, lockable, sealable Equipment meter screw fitting mounted on both sides, wall bracket, HNBR sealing elements, polygon Technical data Ambient temperature max. 70 °C HTR (higher thermal resistance) 650 °C/30 min C1 Operating pressure max. 0.5 MPa (MOP 5) Model G2113

Viega Profipress S

Profipress G connection elbow 90° with SC‑Contur, suitable for base plate model 2624, 2624.1, gunmetal, press connection, Rp‑thread Equipment anti‑twist protection, fixing material, HNBR sealing element Model 2614.6

Content for Trimble Nova is available. Please click here for more information.

Fire protection fittings of Victaulic

Profipress G mounting unit with SC‑Contur, for double‑pipe gas meter, inlet: brass ball valve with Profipress G connection, outlet: Profipress G connection, lockable, sealable Equipment meter screw fitting mounted on both sides, wall bracket, HNBR sealing elements, polygon Technical data Ambient temperature max. 70 °C HTR (higher thermal resistance) 650 °C/30 min C1 Operating pressure max. 0.5 MPa (MOP 5) with DIN‑DVGW‑G‑test mark Model 2648

With the Valsir Product Line Calculator for Revit it is very easy to draw Valsir supply and waste systems twice as fast with up‑to‑date and localized Valsir content. The calculations functionality for waste water systems is fully Revit integrated and EU compliant and reduces the chance of errors to a minimum with both design and calculation taking place in the App. You can download the app for free from [a href="https://www.mepcontent.com/en/apps/" target="_blank"]BIM Manufacturer Apps.

Air Processing module

The free SANHA Product Line Placer App for Revit makes it easy to design piping systems with accurate and localized SANHA specific content.

KE KELIT KELOX PROTEC

Profipress G gas meter angled ball valve with SC‑Contur, for single‑pipe gas meter, brass, inlet: R‑thread, outlet: Profipress G connection, lockable, sealable, angled Equipment test opening < 1 mm, test screw G⅛, HNBR sealing element Technical data Ambient temperature max. 70 °C HTR (higher thermal resistance) 650 °C/30 min C1 Operating pressure max. 0.5 MPa (MOP 5) with DIN‑DVGW‑G‑test mark Model 2644

Profipress G gas meter ball valve with SC‑Contur, for single‑pipe gas meter, brass, inlet/outlet: Profipress G connection (both sides integrally moulded), lockable, sealable, straight way valve Equipment test opening < 1 mm, wall bracket/fixing set, test screw G⅛, HNBR sealing elements Technical data Ambient temperature max. 70 °C HTR (higher thermal resistance) 650 °C/30 min C1 Operating pressure max. 0.5 MPa (MOP 5) with DIN‑DVGW‑G‑test mark Model 2645

Fire protection

Protective basket

In‑Line pressure and vacuum relief valves

Mapress CuNiFe pipes and fittings by Geberit

Mepla pipes and fittings by Geberit

Pipes and fittings CoolFit line, by Georg Fischer

Expansion units and vessels by Reflex

Air valves by Trox Technik

The NIBE S1155 is an intelligent, inverter‑controlled ground source heat pump without an integrated hot water tank, making it easy to install in properties with lower ceilings. A separate hot water tank is selected according to hot water requirements.

Air terminals by Halton

Circular double wall VAV terminal with provision for integral electric reheat coil, circular outlet

Circular double wall VAV terminal with provision for integral hot water reheat coil, 4 circular outlets

1‑way blow ceiling cassette indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Ceiling suspended indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Slave HBC controllers Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Ceiling concealed ducted system Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Ceiling concealed ducted indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Floor standing exposed indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Heat recovery Outdoor Unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Heat recovery Outdoor Unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Aqualux 25 water‑resistant and vandal‑proof escape route signalization and escape route lighting fitting, wall mount

Aqualux 25 water‑resistant and vandal‑proof escape route signalization and escape route lighting fitting, wall mount

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 00 (female) connections: G 1/2"F, G 3/4"F, G 1"F in compliance with ISO 228/1. PICV 05 (male, flat seal) connections: G 3/4"M, EUROK, G 1"M, G 1"1/4M in compliance with ISO 228/1. PICV 10 (with unions) connections: G 1/2"M, G 3/4"M, G 1"M in compliance with ISO 228/1 and EN 10226‑1. To combine with PICC 01, PICC 02 or PICC 03 cartridges. PICC connection: M32x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature:, 20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 03: 6 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 01: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 02: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 03: 41 flow rate ranges to set even during operation; to combine with IVAR TE 3003 electrothermal actuator (M30x1.5; ON/OFF 230 V AC or ON/OFF 24 V AC or proportional 0‑10 V 24 V AC adjustment) or IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0‑10 V 24 V AC adjustment); max closing pressure 6 bar; brass and PSU/POM/PPS (glass‑fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Wall mounted indoor unit, Stylishly designed with rounded contours that fit beautifully into any of Europe’s diverse interior settings, Flap control system, The air flow design that's proven to minimise resistance in a CFD analysis to achieve uniform air conditioning to the furthest corners of the room.

AEROTUBE AZ smart: Can be used as an air supply or air extraction unit

Outdoor Air Processing Unit FDU1800FKXZE1, FDU2400FKXZE1, Air conditioning and intake of outdoor air are in the same system:, Outdoor Air processing unit can be connected to a KXZ VRF system as one of indoor unit series and can create fresh and comfortable air supply together from our high advanced technology., Compact design: Compact design at just 280(650, 1100), 379(1800, 2400)mm in height., High static pressure of 200Pa with low noise level which can meet various kind of installation location for office, refresh room, restroom and kitchen of restaurant etc.