Flexvent Pro Automatic Air Vent

Pro‑Sprinkler range

The Pro range consists of 2 permanently installed refill products for commercial systems of different sizes. They can be used to fill the system and to refill water losses from the system (top up/refill). They have an LED conductivity indicator and a Fill Combi (backflow preventer, pressure reducer and pressure gauge) as standard. There are two sizes (9.5 and 23.0 liter bottle) for the SpiroPure Pro (fixed filling).

The Pro GLT range consists of 2 permanently installed refill products for commercial systems of different sizes. They can be used to fill the system and to refill water losses from the system (top up/ refill). They have an LED conductivity indicator and a FillCombi (backflow preventer, pressure reducer and pressure gauge) as standard. There are two sizes (9.5 and 23.0 liter bottle) for the SpiroPure Pro (fixed filling).

Robot Compact Pro steel manifold

Control for commercial and residential monobloc heat pumps.

Composite Premium Pro W510 Manifold

Silent‑Pro combined corner branch fitting 87.5°, swept‑entry, right

Indirectly fired boiler

Silent‑Pro parallel branch fitting 45°

Robot Optimum Flow Pro steel manifold

Composite Premium Pro District 926 Manifold

Silent‑Pro duct branch fitting 87.5°, swept‑entry, right

Silent‑Pro combined corner branch fitting 87.5°, swept‑entry, left

Silent‑Pro duct branch fitting 87.5°, swept‑entry, left

Robot District Heating Pro steel manifold

Composite Premium Pro Separated 926 Manifold

Silent‑Pro combined branch fitting 87.5°, swept‑entry

System pro E power Top Busbar System switchboard

System pro E power Top Busbar System switchboard – capacitor bank application

System pro E power 2x Top Busbar System switchboard + Corner Structure

Aire acondicionado, unidad exterior La unidad exterior debe combinarse con la unidad interior VAIB1‑… WNI con la misma capacidad de refrigeración.

Colector sintético que se puede ensamblar modularmente

Aire acondicionado, unidad interior La unidad interior debe combinarse con la unidad exterior VAIB1‑…WNO con la misma capacidad de refrigeración.

Indirect/Buffer tank

Gas boiler Power availability 80, 120, 160 and 200 kW

BottomTurn bend

Gas boiler, execution left Available output 285, 355, 430, 500, 575 and 650 kW

BackFlip bend

Gas boiler, execution right Available output 285, 355, 430, 500, 575 and 650 kW

Caldera mural de gas de alto rendimiento

Gas boiler Available output 570 KW, 710, 860, 1000, 1150 and 1300 kW

Gas condensing boiler cascade system

Series of doors and frames for UK600 BL

Gas condensing boiler cascade system

Gas condensing boiler cascade system

Connector sets from Remeha

Colector sintético (azul, verde, rojo) que se puede ensamblar modularmente

The ProFill range consists of 2 refill products for commercial systems of different sizes. These products are not permanently fitted to the system. They are used to fill the system and then removed. To top up the water in the system (refill/top up), you should use one of the permanently installed filling products (SpiroPure Home / Pro). There are two sizes for the SpiroPure ProFill (Mobile Filling) (9.5 and 23.0 liter tank).

The ProClean range consists of 2 treatment and cleaning products for commercial systems of different sizes. The mobile products can be used for conditioning and cleaning in the by‑pass. They are temporarily installed in an existing system where they can remove impurities from the system and treat the water to the desired level.

Válvula mezcladora electrónica con termodesinfección programable

High performance; easy‑to‑install.The Caleffi SinkMixer™ 5212 scald protection undersink thermostatic mixing valve is precision engineered to deliver safe tempered water. Patent pending forged low‑lead brass valve body enables high flow capacity in a very compact body. The easy‑to‑install 4‑port design connects all water lines and, compared to standard 3‑port valves, requires less piping and no tee. ICC‑ES certified compliance to NSF/ANSI/CAN 61‑2019 and IPC, IRC, UPC and NPC for drinking water systems in accordance with the U.S. and Canadian plumbing codes. The 5212AP product includes compression union connections with plug for cold water outlet and copper compression fittings kit for hard piping installations.

Content for Trimble Nova is available. Please click here for more information.

A frost‑proof outside tap prevents the pipe freezes in cold weather.

High performance; easy‑to‑install.The Caleffi SinkMixer™ 5212 scald protection undersink thermostatic mixing valve is precision engineered to deliver safe tempered water. Patent pending forged low‑lead brass valve body enables high flow capacity in a very compact body. The easy‑to‑install 4‑port design connects all water lines and, compared to standard 3‑port valves, requires less piping and no tee. ICC‑ES certified compliance to NSF/ANSI/CAN 61‑2019 and IPC, IRC, UPC and NPC for drinking water systems in accordance with the U.S. and Canadian plumbing codes.

Air Processing module

The free SANHA Product Line Placer App for Revit makes it easy to design piping systems with accurate and localized SANHA specific content.

KE KELIT KELOX PROTEC

In‑Line pressure and vacuum relief valves

Circular double wall VAV terminal with provision for integral electric reheat coil, circular outlet

Circular double wall VAV terminal with provision for integral hot water reheat coil, 4 circular outlets

The NIBE S1155 is an intelligent, inverter‑controlled ground source heat pump without an integrated hot water tank, making it easy to install in properties with lower ceilings. A separate hot water tank is selected according to hot water requirements.

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 00 (female) connections: G 1/2"F, G 3/4"F, G 1"F in compliance with ISO 228/1. PICV 05 (male, flat seal) connections: G 3/4"M, EUROK, G 1"M, G 1"1/4M in compliance with ISO 228/1. PICV 10 (with unions) connections: G 1/2"M, G 3/4"M, G 1"M in compliance with ISO 228/1 and EN 10226‑1. To combine with PICC 01, PICC 02 or PICC 03 cartridges. PICC connection: M32x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature:, 20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 03: 6 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 01: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 02: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 03: 41 flow rate ranges to set even during operation; to combine with IVAR TE 3003 electrothermal actuator (M30x1.5; ON/OFF 230 V AC or ON/OFF 24 V AC or proportional 0‑10 V 24 V AC adjustment) or IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0‑10 V 24 V AC adjustment); max closing pressure 6 bar; brass and PSU/POM/PPS (glass‑fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Wall mounted indoor unit, Stylishly designed with rounded contours that fit beautifully into any of Europe’s diverse interior settings, Flap control system, The air flow design that's proven to minimise resistance in a CFD analysis to achieve uniform air conditioning to the furthest corners of the room.

AEROTUBE AZ smart: Can be used as an air supply or air extraction unit

Outdoor Air Processing Unit FDU1800FKXZE1, FDU2400FKXZE1, Air conditioning and intake of outdoor air are in the same system:, Outdoor Air processing unit can be connected to a KXZ VRF system as one of indoor unit series and can create fresh and comfortable air supply together from our high advanced technology., Compact design: Compact design at just 280(650, 1100), 379(1800, 2400)mm in height., High static pressure of 200Pa with low noise level which can meet various kind of installation location for office, refresh room, restroom and kitchen of restaurant etc.

Lossnay Air Processing DX Unit

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Heat pump micro inverter, Outdoor unit, Supplies 19 kW under standard cooling mode conditions and operates efficiently in extreme conditions down to, 15 C, Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping, Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation, Plastic cover is mounted over control boards in standard to facilitate the maintenance, Design flexibility optimised with a compatible piping length up to 70 m and a precharged piping length of 30 m

IVAR E‑SAT DUAL is a double heat exchanger satellite module which allows on‑site production of DHW and hot water for the heating system, with only AFS connections and technical water supply/return. Thanks to the integrated electronics IVAR E‑SAT modulates the technical water flow to guarantee a low return temperature to the boiler. The double exchanger solution, completely separating the centralized system from the domestic one, guarantees easy maintenance of the single user system. IVAR ESAT DUAL can be equipped with differential pressure valves and shut‑off valves kit.

MULTI•PRESS•LEAK•CUPHIN is the new press fitting designed to guarantee water leakage in case of failed pressing and to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The absence of sealing if not pressed is a function which is especially on demand on the market to avoid problems and damage in case of forgotten pressing: thanks to the system test, the installer can immediately identify leaks and repair them by correctly pressing the fitting. Available in a wide range of configurations and sizes. Fitting body made of Cuphin CW724R.

Solar collector of DSS

The LEGIOMIX® electronic mixing valve provides precise temperature control over very low and very high flow rate demand, minimal pressure drop with a ball valve control element, automatic self‑cleaning to prevent scale formation and easy‑to‑use digital interface with data logging, alarming and status indication. The LEGIOMIX electronic mixing valve is furnished with a controller with LCD user interface that provides a set of programs for circuit thermal disinfection to kill Legionella. The controller is configurable via keypad, or local or remote computer. Depending on the type of system and habits of the user, temperature levels and operation times can be programmed as desired. In addition, it comes standard with monitoring and remote control connections.The LEGIOMIX Station is pre‑piped with LEGIOMIX 3‑way mixing valve with union connections, serviceable low‑lead stainless steel check valves, a recirculation connection and low‑lead isolation valves for fast and simple installation. The LEGIOMIX controller is pre‑mounted and pre‑wired to the valve actuator, return water temperature sensor and tempered water sensor in a packaged wall mount configuration with steel uni‑strut frame that can bolt to the wall through any of the perforations. The assembly also includes copper type L pipe and a 24 VAC transformer.The LEGIOMIX6000 series electronic mixing valve complies with the requirements of NSF/ANSI 372‑2016 as certified by ICC‑ES, and is certified to ASSE 1017, CSA B125.3, UPC, IPC, Low Lead Laws and listed by ICC‑ES for use in accordance with the U.S. and Canadian plumbing codes. The valve meets the requirement of CSA Z317.1 Special Requirement for Plumbing Installations in Health Care Facilities, certified by ICC‑ES.

Serie Estándar de pared, Unidad interior, Diseño elegante que encaja en cualquier tipo de decoración interior., El flujo de aire de largo alcance se obtiene utilizando la tecnología Jet Air (la misma tecnología que la forma de pala del motor a reacción), Sistema de control de trampillas: las trampillas de aire se pueden ajustar en un amplio rango de ángulo para proporcionar un flujo de aire cómodo, La limpieza y el mantenimiento son más fáciles que nunca gracias a la funda extraíble, Dos gamas disponibles compatibles con R32 (‑W1) o R410A (‑S) y sistemas simples/multi

Wall mounted Diamond Series, Indoor unit, Elegant and timeless design with rounded contours and satin finish perfectly suitable for all interiors, Long reach airflow up to 17 m is achieved by using Jet Air technology (same technology as blade shape of jet engine), Advanced technology filters and cleaning operations ensure high quality of the air supplied to the room, Flap control system: flap can be set to wide angle position to provide a comfortable air flow, Two available ranges compatible with R32 (‑W) or R410 (‑S)

1.Wall mounted indoor unit 2.Elegant timeless design with compact sizing. Suitable for large rooms (more compact than ZR series) 3. Wireless Control System is included. 4. New remote Control with simple design 5.Advanced technology filters and cleaning operations ensure high quality of the air supplied to the room 6.Flap Control System: Flap can be set to wide angle position to provide a comfortable air flow.

Circular double wall VAV terminal with provision for integral hot water reheat coil, 4 circular outlets

Control remoto con programador semanal

Model 8317CTFP, 120 VAC cable heated, freeze protected, combination shower and eye/face wash, with top or bottom supply, and with AXION® MSR eye/face wash and showerhead.

Distribution and mixing system IVAR MULTIMIX for thermal power stations, modular with:, Manifold made of CB753S brass from casting with adjustable and interceptable hydraulic separator integrated. Complete with union with swivel fittings G 1” for the connection to distribution kits, shut‑off ball valves DN 25 at the inlets, thermomanometer 0‑6 bar/0‑120 ◦C and automatic air vent valve. 2‑way or 3‑way versions available. Possibility of connection to the primary circuit from above, below, right or left. Expandable by connecting to other manifolds with swivel nipples G 1”. Other components made of CW617N brass. Gaskets and o‑rings made of Peroxide‑cured EPDM. Connections to the primary circuit G 1”F, centre distance delivery/return 52 mm (inlet from the side), 197 mm (inlet from above or below, 2‑way manifold), 170 mm (inlet from above or below, 3‑way manifold); connections to the distribution circuits with swivel nut G 1”F, centre distance delivery/return 45 mm. Max operating temperature 120 ◦C. Max operating pressure 10 bar. Max primary circuit flow rate 3500 l/h., High‑temperature direct flow kit complete with telescopic system for pump connection, shut‑off ball valves for pump connection, delivery and return thermometers 0÷80 ◦C; check valve. Primary circuit connections G 1” M, delivery/return centre distance 45 mm; distribution circuits connections G 3/4”F, delivery/return centre distance 90 mm. Parts from casting: CB753S brass. Other parts made of CW617N brass. Gaskets and o‑rings: peroxide‑cured EPDM. Max operating temperature (pump excluded) 120 ◦C. Max operating pressure 10 bar., Low temperature mixing kit complete with 3‑way mixing valve with headwork for thermostatic or motorisable control, secondary bypass with micrometric dually adjusted lockshields and position memory, telescopic system for pump connection, shut‑off ball valves for pump connection, delivery and return thermometers 0÷80 ◦C, check valve, fixed setting safety thermostat 60◦C. Primary circuit connections (manifold‑separator) G 1”M, centre distance delivery/return 45 mm; heating circuits connections G 3/4”F, centre distance delivery/return 90 mm. Parts from casting: CB753S brass. Other parts: CW617N brass. Gaskets and o‑rings: peroxide‑cured EPDM. Max operating temperature (pump excluded) 120 ◦C. Max operating pressure 10 bar., Variable‑speed electronic pump WILO4F centre distance 130 mm., 3‑speed standard pump WILO3F centre distance 130 mm., Polypropylene insulation shell., Wall fitted cabinet with variable height and depth., T 5011 U: thermostatic head with incorporated control and immersion remote sensor. Connection: M30 x 1.5. Probe holder connection: 1/2". Range: 30‑55 °C. Cable lenght: 2 m., RV 01: axial motor. Connection: M30 x 1.5. 3‑point adjustment 230 V AC or 24 V AC or proportional 0‑10 V 24 V AC.

El sistema de tubería multicapa y conexiones en latón patentadas TURBO PRESS GAS ofrece la más amplia garantía por instalaciones gas de uso domestico, Las características del sistema lo rinden particularmente simple y fiable en la realización de nuevas instalaciones y muy practico cuando se cambian las existentes. Tubos y racores se ensamblan por medio de máquinas electroidraulicas equipadas con grapas de perfil TH, que provocan una deformación permanente del manguito externo en acero inoxidable AISI 304 solubilizado, garantizando una unión irrescindible.

The NIBE SMO 40 gives optimised control of the climate system and is designed to be combined with NIBE air/water heat pumps to provide an integrated climate system for homes and properties. Up to eight NIBE air/water heat pumps can be connected to a control system.

Heat pump standard inverter, Outdoor unit, The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode, Component technology contributing to environmental protection with a range operating with R32 (‑W) and another with R410A, Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion, Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump standard inverter, Outdoor unit, Standard Inverter range offers high seasonal performance up to level A++ in cooling mode, Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion, Design flexibility optimised with a compatible piping length up to 30 m with a precharged piping length of 15 m

Heat pump micro inverter, Outdoor unit, The Micro Inverter range offers products from 10 to 14 kW in cooling mode with high seasonal performance up to level A++, Wide range of operation down to, 20 C in heating and, 15 C in cooling, Component technology contributing to environmental protection with a range operating with R32 (‑W) and another with R410A, High efficiency performance and low vibration thanks to the use of DC twin rotary compressor technology, Equipped with a silent mode offering 6 dB less compared to standard operation, Design flexibility optimised with a compatible piping length up to 50 m and a precharged piping length of 30 m

Sub‑distribution boards

Reverse thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Surface‑mounted weather‑proof luminaire of PC. For 1 fluorescent lamp T5 35/49/80 W.

Serie Estándar de pared, Unidad interior, Diseño elegante que encaja en cualquier tipo de decoración interior., El flujo de aire de largo alcance se logra mediante el uso de la tecnología Jet Air (la misma tecnología que la forma de pala del motor a reacción), Sistema de control de aletas: la aleta se puede colocar en una posición de gran ángulo para proporcionar un flujo de aire cómodo, La limpieza y el mantenimiento son más fáciles que nunca gracias a la funda extraíble, Dos gamas disponibles compatibles con multisistemas R32 (‑W)

Hydrolution, Unidad interior de montaje en pared (R32/R410A) Hydrobox, Unidad compacta y plug and play, Tamaño similar a una caldera de gas., Conexión dividida (se requieren tuberías de refrigerante entre la unidad exterior e interior), Listo para calefacción, refrigeración y producción de agua caliente (se requiere tanque separado), Conectable a un sistema de monitoreo externo, MODBUS (Se requiere accesorio), Conectable a su propio sistema de monitoreo remoto a través de la plataforma myUplink, Posibilidad de combinar con paneles solares fotovoltaicos (se requiere accesorio), Posibilidad de integración con piscinas (calentamiento de piscina) y calefacción solar (Se requiere accesorio), Listo para red inteligente (listo para SG), Equipado con componentes hidráulicos principales y control remoto integrado, Fuente de alimentación universal (trifásica 400V / monofásica 230V)

POWERWAVE 33 can be used in environments that do not require downtime, continuous availability of power protection is essential. In to respond to today's dynamic IT and process‑related environments that change daily through new server technologies, migration and centralization, resilient and easily adaptable capability protection concepts are required. POWERWAVE 33 is the foundation for continuous power protection availability of network critical infrastructures in enterprise data centers where business continuity is of paramount importance and in process control environment where continuity of production is essential.

AEROTUBE DD 110: Passive ventilator for air supply or extraction

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 1 and 4 bar. I: insulated B: with break tank R: with direct refill

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Circular single wall VAV terminal with provision for integral electric reheat coil, 4 circular outlets

Circular single wall VAV terminal with provision for integral electric reheat coil, circular outlet

Smart system for managing the heating system remotely via app. It allows remote control of all the zones in the house through time slots. Compatible with autonomous or centralized heating systems, at high or low temperature (e.g. radiators, radiant floor or ceiling, fan‑coil). It can be used in public or private environment thanks to tamper controls. Installation of temperature sensors with no electrical connection. Temperature sensor with relay replaces the main chronothermostat and manages the switching on/off of the boiler (or zone valve with appropriate wiring). Operating system compatible with MyCubodomo App: Android 5.0 and iOS 8.0 onwards. Operating temperature range:, 5 – 45 °C. Transmission frequency: 868, 3 MHz. Signal range: 30 meters. Cube: power supply 5 V/1 A micro USB, Wi‑Fi Standard FCC/CE/TELEC/KCC/SRRC/IC/NCC, protocollo Wi‑Fi 802.11 b/g/n, frequency 2.4 GHz ~ 2.5 GHz (2400M ~ 2483.5M), dimensions (W x H x D) 100 x 100 x 100 mm. Temperature sensor (with or without relay): power supply 2 alkaline batteries AA (mod. LR6) 1.5 V, hysteresis on the set point temperature On‑Off +/‑ 0, 1°C, average battery life 3 years, dimensions (W x H x D) 87 x 87 x 28 mm. Actuator: power supply 3 alkaline batteries AA (mod. LR6) 1.5 V, connection M30x1.5, maximum closing distance 12 mm, insulation CLASS III, average battery life 3 years. Dimensions (W x H x D) 92 x 48 x 66 mm. Wiring Center: control unit equipped with radio module, power supply 230V 50/60 Hz, fuses F3 15A/250V, output switching relay max 2A/230V AC, 2A/30V DC, dimensions (W x H x D) 180 x 130 x 65 mm.

NIBE F730 es una bomba de calor de aire de escape inteligente. NIBE F730 proporciona calefacción, ventilación y agua caliente de manera eficiente, simple y económica.

Sistema RAC individual, Unidad exterior, Conectable con unidad interior de pared Serie estándar (ZSP), Flexibilidad de diseño optimizada con una longitud de tubería compatible de hasta 25 m (tamaño 45/50) y hasta 15 m (tamaño 25/35), Amplio rango de funcionamiento hasta, 15 grados C y hasta 46 grados C en refrigeración (24 grados C en calefacción), Gama de productos disponible con refrigerantes R32 (‑W1) y R410A (‑S)

Saugnische SN

Wall mounted Diamond Series, Indoor unit, Elegant and simple design with rounded contours that adapts to any interior, Long reach airflow up to 20 m is achieved by using Jet Air technology (same technology as blade shape of jet engine), Advanced technology filters and cleaning operations ensure high quality of the air supplied to the room, Flap control system: flap can be set to wide angle position to provide a comfortable air flow, Two available ranges compatible with R32 (‑W) or R410 (‑S)