Browse within the largest BIM library and enrich your project with manufacturer‑specific and generic BIM content! The powerful search engine allows you to find up‑to‑date graphic and parametric product information, ready to use in your BIM process. Simply load or insert 3D content directly into your Revit model or CAD drawing. Without having to leave your project environment. Free to download and use. You can download the app for free from [a href="https://store.mepcontent.com/en/product/details/2" target="_blank"]our store.

The free SANHA Product Line Placer App for Revit makes it easy to design piping systems with accurate and localized SANHA specific content.

POLO‑RDS Evolution Seal element DN 150, 25‑65mm

POLO‑RDS Evolution Seal element DN 150, 70‑90mm

POLO‑RDS Evolution Seal element DN 100, 63mm

POLO‑RDS Evolution Seal element dummy DN 100, dummy

POLO‑RDS Evolution Seal element DN 150, 110mm

POLO‑RDS Evolution Floor penetration DN 110

POLO‑RDS Evolution Finned pipe DN 100‑300/600mm

POLO‑RDS Evolution Fireflange DN 100‑DN 200

POLO‑RDS Evolution Seal element multiple passage DN 150, multiple passage 8‑35mm

POLO‑RDS Evolution Seal element DN 200, 160mm

POLO‑RDS Evolution Seal element dummy DN 150, dummy

POLO‑RDS Evolution Seal element DN 300, 250mm

POLO‑RDS Evolution Finned pipe DN 100‑300

POLO‑RDS Evolution Seal element DN 300, 160mm

POLO‑RDS Evolution Longbow Long bend DN 110

POLO‑RDS Evolution Seal element DN 100, 52‑58mm

POLO‑RDS Evolution Seal element multiple passage DN 100, multiple passage 8‑18mm

POLO‑RDS Evolution Seal element DN 100, 13‑50mm

POLO‑RDS Evolution Seal element DN 200, 50‑125mm

POLO‑RDS Evolution Seal element DN 300, 200mm

POLO‑RDS Evolution Seal element dummy DN 200, dummy

POLO‑RDS Evolution Seal element dummy DN 300, dummy

Water to water heat pumps, heating only, very high temperature water production with refrigerant type R134a

Wall mounted indoor unit, with refrigerant type R410A

Wall mounted indoor unit, with refrigerant type R410A

Monobloc air‑water inverter heat pump (R290)

Monobloc air‑water inverter heat pump (R290)

Content for Trimble Nova is available. Please click here for more information.

Monobloc heat pump control module

Fully‑configurable and high‑efficiency air‑source reverse‑cycle rooftop unit

Fully‑configurable and high‑efficiency air‑source cooling only rooftop unit

• Detector with cutting‑edge PIR technology for wall or ceiling installation. Angled installation with DM ACC B1B accessory. • The detector allows individual adjustment of its three (3) PIR sensors. • IP55: Designed for indoor or outdoor installation. • The detector can be configured in three operating modes: Motion detector, Presence detector, or Twilight switch. • Push‑in clamp terminal block, saving 60% in installation time. • ZCT (Zero Crossing Technology), switching on "zero crossing" when the 16A relay closes and opens, allowing control of large loads. • NO or NC contact status selectable from the smartphone app via Bluetooth. • Suitable for LED, fluorescent lamps, etc. • Elegant and clean design without physical potentiometers. • Application examples: residential communities, home exteriors, loading/unloading areas, and, in general, any outdoor or semi‑covered area.

• Detector with cutting‑edge PIR technology for wall installation. Angled installation with DM ACC B1B accessory. • The detector allows individual adjustment of its two PIR sensors. • IP55: Designed for indoor or outdoor installation. • The detector can be configured in three operating modes: Motion detector, Presence detector, or Twilight switch. • Push‑in clamp terminal block, saving 60% in installation time. • ZCT (Zero Crossing Technology), switching on "zero crossing" when the 16A relay closes and opens, allowing control of large loads. • NO or NC contact status selectable from the smartphone app via Bluetooth. • Suitable for LED, fluorescent lamps, etc. • Elegant and clean design without physical potentiometers. • Application examples: residential communities, home exteriors, loading/unloading areas, and, in general, any outdoor or semi‑covered area.

SE TEC 03B: • Discreet and elegant emergency lighting fixture with Autotest, for flush mounting in technical ceilings • Minimum free height required for mounting of only 40mm (above the false ceiling) • Product functionally complementary to DINUY's range of Detectors • Application: illumination of evacuation routes • Very low consumption with switched power supply • Available in white, black and grey • High‑power LED SE TEC BAT: • Replacement for SE TEC XXX lanterns • 1‑hour runtime • 4.8V/750mAh Ni‑Cd battery • IP20/IK04 protection rating

• Detector with high quality, latest generation PIR technology, for surface installation on ceilings at great heights (up to 10 m). • Configuration and adjustment via APP from your Smartphone via Bluetooth. • The detector can be configured in 3 operating modes: Motion Detector, Presence Detector or Twilight Switch. • It has a switching channel with 16A relay. • ZCT (Zero Crossing Technology), ‘zero crossing’ switching, which allows the control of large loads without damaging the relay. • NO or NC contact status selectable from the APP. • Highly sensitive PIR sensor, which detects the smallest movement within its coverage area. • Possibility of connecting several detectors in parallel to extend the detection area. • Valid for all types of loads: LEDs, Fluorescence, etc. • Elegant design • Application examples: warehouses, sports centres, halls and double or triple height areas, etc.

A smart shut‑off valve, it records water consumption, temperature and pressure in real time

Telescopic fitting push‑fit

Heat recovery ventilation unit, ceiling mounted

Heat recovery ventilation unit, ceiling mounted

Synthetic manifold (blue, green, red) that can be assembled modularly

Synthetic manifold that can be assembled modularly

Composite EcoFlow Manifold

Stainless Steel Premium Open LT W320 Manifold

Composite Premium Open LT W500 Manifold

Composite Premium Open LT U500 Manifold

Stainless Steel Premium Open LT U320 Manifold

Chiller, air source for outdoor installation with refrigerant type R134a

Chiller, air source for outdoor installation with refrigerant type R513A

Vertical Lossnay Fresh Air Heat Recovery Ventilation with extra option between Silencer Box P‑500SB‑E or Air Cooler CP‑500CM

Vertical Lossnay Fresh Air Heat Recovery Ventilation with extra option between Silencer Box P‑500SB‑E or Air Cooler CP‑500CM

High efficiency wall hung gas boiler

Hot water heat pump

Hot water heat pump

Hot water heat pump

Hot water heat pump

Chiller, air source for outdoor installation with refrigerant R513A

Water cooled air coolers for IT Cooling

A steel low loss header with (microbubble) deaerator and dirt separator with a DN65 or DN100 flange connection, developed for Remeha

The PicoControl Kompakt SOLO is a compact automatic expansion and pressure‑maintaining device. The unit contains 1 pump (1x 100%) and an overflow valve. An unpressurized expansion tank is integrated.

A steel low loss header with (microbubble) deaerator and dirt separator including an internal magnet with a DN65 or DN100 flange connection, developed for Remeha

A steel (microbubble) deaerator and dirt separator for standard flow rate (1.5 m/s) with a DN50, DN300 PN16 connection

A steel dirt separator for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel low loss header with (microbubble) deaerator and dirt separator with magnet with a DN50, DN300 PN16 flange connection

A steel low loss header with (microbubble) deaerator and dirt separator with a DN50, DN300 connection

A steel dirt separator with magnet for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator and dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator and dirt separator with magnet for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A demountable steel (microbubble) deaerator and dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator for high flow rate (3 m/s) with a DN50, DN300 PN16 connection

A steel dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

Expansion vessels for MultiControl Cool EMCC series

Additional vessels for EMCK expansion system, only overflow line, without level measurement

Expansion vessels for EMCM and ETCM, P max. 0, 5 bar / T max. 70ºC

The MultiControl COOL is an automatic expansion and pressure‑maintaining devicemdesigned for cooling systems. A separate storage tank is required.

The MultiControl Modular SOLO is an automatic expansion and pressure‑maintaining device. The unit contains 1 pump (1x 100%) and an overflow valve. A separate storage tank is required.

Intermediate vessels, PN10, P max. 10 bar / T max. 110ºC

A brass dirt separator with a 22 mm, 2" horizontal connection

The MultiControl Kompakt SOLO is an automatic expansion and pressure‑maintaining device, with 1 pump (1x 100%) and an overflow valve. An unpressurised expansion tank is integrated.

A brass dirt separator with magnet and a 22 mm, 2" universal connection

Heat pump outdoor unit

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 1 and 4 bar. I: insulated B: with break tank R: with direct refill

A brass low loss header with (microbubble) deaerator and dirt separator with a 1", 1½" connection and magnet

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 2.5 and 6 bar. I: insulated B: with break tank R: with direct refill

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 0, 5 and 2, 5 bar

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 5 and 10 bar. I: insulated R: with direct refill

Maintenance unit for SpiroExpand expansion vessels

Hydraulic deaerator and dirt separator

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 9 and 16 bar. I: insulated R: with direct refill

Safety expansion vessel for closed hot water, , heating and cooling systems, P max. 3 bar / T max. 70°C

EVU‑10 Universal expansion vessels with replaceable membrane, P max. 10 bar / T max. 70ºC. Expansion vessels larger than 300 liters on request.

Universal expansion vessels with replaceable membrane, P max. 6 bar / T max. 70ºC. Expansion vessels larger than 300 liters on request.

Expansion vessels for systems with buffer tanks, P max. 3 bar / T max. 70ºC

Pressure expansion vessels with replaceable membrane, P max. 3 bar / T max. 70º