Mitsubishi Electric Mitsubishi Electric System Designer

Mitsubishi Electric System Designer

Find quickly Mitsubishi Electric content and place it directly in Revit or Autocad with this free App. The Mitsubishi Electric System Designer App for Revit and AutoCAD is a powerful tool allowing you to find the right Mitsubishi Electric Revit families and CAD files for heating and cooling units that you need. Filter the Mitsubishi Electric HVAC units on technical properties or search on article number, description, model or series and use your desired air conditioners in your BIM projects instantly. The following product series are available in the app: City Multi, Ecodan, E-series, Lossnay, M Series, Mr. Slim. Download the free app now! You can download the app for free from [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]our store[/a].

Mitsubishi Electric

Mitsubishi Electric System Designer

Find quickly Mitsubishi Electric content and place it directly in Revit or Autocad with this free App. The Mitsubishi Electric System Designer App for Revit and AutoCAD is a powerful tool allowing you to find the right Mitsubishi Electric Revit families and CAD files for heating and cooling units that you need. Filter the Mitsubishi Electric HVAC units on technical properties or search on article number, description, model or series and use your desired air conditioners in your BIM projects instantly. The following product series are available in the app: City Multi, Ecodan, E-series, Lossnay, M Series, Mr. Slim. Download the free app now! You can download the app for free from [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]our store[/a].

Conforme à EMCS

.PDF

Climatiseur

Mitsubishi Electric

Télécharger
Remeha Tzerra HP

Tzerra HP

Boiler

Remeha

Tzerra HP

Boiler

Conforme à EMCS

.DWG .RFA .IFC

Chaudière

Remeha

Télécharger
IVAR PICV 00-05-10 With PICC 01-02-03

PICV 00-05-10 With PICC 01-02-03

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 00 (female) connections: G 1/2"F, G 3/4"F, G 1"F in compliance with ISO 228/1. PICV 05 (male - flat seal) connections: G 3/4"M, EUROK, G 1"M, G 1"1/4M in compliance with ISO 228/1. PICV 10 (with unions) connections: G 1/2"M, G 3/4"M, G 1"M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 01, PICC 02 or PICC 03 cartridges. PICC connection: M32x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 03: 6 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 01: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 02: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 03: 41 flow rate ranges to set even during operation; to combine with IVAR TE 3003 electrothermal actuator (M30x1.5; ON/OFF 230 V AC or ON/OFF 24 V AC or proportional 0-10 V 24 V AC adjustment) or IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0-10 V 24 V AC adjustment); max closing pressure 6 bar; brass and PSU/POM/PPS (glass-fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

IVAR

PICV 00-05-10 With PICC 01-02-03

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 00 (female) connections: G 1/2"F, G 3/4"F, G 1"F in compliance with ISO 228/1. PICV 05 (male - flat seal) connections: G 3/4"M, EUROK, G 1"M, G 1"1/4M in compliance with ISO 228/1. PICV 10 (with unions) connections: G 1/2"M, G 3/4"M, G 1"M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 01, PICC 02 or PICC 03 cartridges. PICC connection: M32x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 03: 6 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 01: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 02: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 03: 41 flow rate ranges to set even during operation; to combine with IVAR TE 3003 electrothermal actuator (M30x1.5; ON/OFF 230 V AC or ON/OFF 24 V AC or proportional 0-10 V 24 V AC adjustment) or IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0-10 V 24 V AC adjustment); max closing pressure 6 bar; brass and PSU/POM/PPS (glass-fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Conforme à EMCS

.RFA

Vanne pour chauffage et refroidissement

IVAR

Télécharger
IVAR LEGIO-BOX 3

LEGIO-BOX 3

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Dimensions (W x H x D): 295 x 290 x 75 mm.

IVAR

LEGIO-BOX 3

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Dimensions (W x H x D): 295 x 290 x 75 mm.

Conforme à EMCS

.RFA

Panneau de commande

IVAR

Télécharger
IVAR LEGIO-BOX 2

LEGIO-BOX 2

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Box dimensions (W x H x D): 500 x 350 x 90 mm.

IVAR

LEGIO-BOX 2

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Box dimensions (W x H x D): 500 x 350 x 90 mm.

Conforme à EMCS

.RFA

Panneau de commande

IVAR

Télécharger
IVAR LEGIO-BOX 1

LEGIO-BOX 1

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with manifolds, box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass (externally zinc-plated). Manifolds material: CW617N brass (externally zinc-plated). Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: EUROK. Box dimensions (W x H x D): 500 x 350 x 90 mm.

IVAR

LEGIO-BOX 1

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with manifolds, box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass (externally zinc-plated). Manifolds material: CW617N brass (externally zinc-plated). Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: EUROK. Box dimensions (W x H x D): 500 x 350 x 90 mm.

Conforme à EMCS

.RFA

Panneau de commande

IVAR

Télécharger
IVAR PICV 200-205-210 With PICC 22

PICV 200-205-210 With PICC 22

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 200 (female) connections: G 1"1/2F, G 2"F in compliance with ISO 228/1. PICV 205 (male - flat seal) connections: G 2"M, G 2"1/2M in compliance with ISO 228/1. PICV 210 (with unions) connections: G 1"1/2M, G 2"M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 22 cartridge. PICC connection: W81x16. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 22: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

IVAR

PICV 200-205-210 With PICC 22

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 200 (female) connections: G 1"1/2F, G 2"F in compliance with ISO 228/1. PICV 205 (male - flat seal) connections: G 2"M, G 2"1/2M in compliance with ISO 228/1. PICV 210 (with unions) connections: G 1"1/2M, G 2"M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 22 cartridge. PICC connection: W81x16. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 22: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Conforme à EMCS

.RFA

Vanne pour chauffage et refroidissement

IVAR

Télécharger
IVAR PICV 100-105-110 With PICC 11-12-13

PICV 100-105-110 With PICC 11-12-13

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 100 (female) connections: G 1"F, G 1"1/4F in compliance with ISO 228/1. PICV 105 (male - flat seal) connections: G 1"M, G 1"1/4M, G 1"1/2M in compliance with ISO 228/1. PICV 110 (with unions) connections: G 3/4"M, G 1"M, G 1"1/4M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 11, PICC 12 or PICC 13 cartridges. PICC connection: M54x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 13: 4 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 11: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 12: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 13: 41 flow rate ranges to set even during operation; to combine with IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0-10 V 24 V AC adjustment); max closing pressure 4 bar; brass and PSU/POM/PPS (glass-fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

IVAR

PICV 100-105-110 With PICC 11-12-13

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 100 (female) connections: G 1"F, G 1"1/4F in compliance with ISO 228/1. PICV 105 (male - flat seal) connections: G 1"M, G 1"1/4M, G 1"1/2M in compliance with ISO 228/1. PICV 110 (with unions) connections: G 3/4"M, G 1"M, G 1"1/4M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 11, PICC 12 or PICC 13 cartridges. PICC connection: M54x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 13: 4 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 11: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 12: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 13: 41 flow rate ranges to set even during operation; to combine with IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0-10 V 24 V AC adjustment); max closing pressure 4 bar; brass and PSU/POM/PPS (glass-fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Conforme à EMCS

.RFA

Vanne pour chauffage et refroidissement

IVAR

Télécharger
IVAR IVARSAT-L-LE

IVARSAT-L-LE

Satellite module that independently manages low-temperature heating (mixed circuit) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; mixing valve for fixed point mixing (with thermostatic control head and remote contact probe) or outside compensated temperature mixing (with axial servomotor and control unit); three-speed pump / model “E” with variable-speed pump EEI<20; summer/winter two-way valve; pocket for temperature immersion probe on delivery side of primary circuit; balancing valve on primary circuit; balancing by-pass valve on mixed circuit; balancing lockshield of heating/domestic water circuit; hydraulic separator with built-in check valve; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. Model “1” with high-temperature domestic water outlet. Model “R” with hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.

IVAR

IVARSAT-L-LE

Satellite module that independently manages low-temperature heating (mixed circuit) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; mixing valve for fixed point mixing (with thermostatic control head and remote contact probe) or outside compensated temperature mixing (with axial servomotor and control unit); three-speed pump / model “E” with variable-speed pump EEI<20; summer/winter two-way valve; pocket for temperature immersion probe on delivery side of primary circuit; balancing valve on primary circuit; balancing by-pass valve on mixed circuit; balancing lockshield of heating/domestic water circuit; hydraulic separator with built-in check valve; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. Model “1” with high-temperature domestic water outlet. Model “R” with hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.

Conforme à EMCS

.RFA

Distributeur pour chauf/clim

IVAR

Télécharger
IVAR IVARSAT-HL-HLE

IVARSAT-HL-HLE

Satellite module that independently manages high-temperature and low-temperature heating (direct and mixed circuits) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; mixing valve for fixed point mixing (with thermostatic control head and remote contact probe) or outside compensated temperature mixing (with axial servomotor and control unit); three-speed pump / model “E” with variable-speed pump EEI<20; summer/winter two-way valve on high-temperature and low-temperature circuits; pocket for temperature immersion probe on delivery side of primary circuit; balancing valve on primary circuit; balancing by-pass valve on mixed circuit; balancing lockshield of heating/domestic water circuit; hydraulic separator with built-in check valve; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. High-temperature domestic water outlet. Hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.

IVAR

IVARSAT-HL-HLE

Satellite module that independently manages high-temperature and low-temperature heating (direct and mixed circuits) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; mixing valve for fixed point mixing (with thermostatic control head and remote contact probe) or outside compensated temperature mixing (with axial servomotor and control unit); three-speed pump / model “E” with variable-speed pump EEI<20; summer/winter two-way valve on high-temperature and low-temperature circuits; pocket for temperature immersion probe on delivery side of primary circuit; balancing valve on primary circuit; balancing by-pass valve on mixed circuit; balancing lockshield of heating/domestic water circuit; hydraulic separator with built-in check valve; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. High-temperature domestic water outlet. Hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.

Conforme à EMCS

.RFA

Distributeur pour chauf/clim

IVAR

Télécharger
IVAR IVARSAT-H

IVARSAT-H

Satellite module that independently manages high-temperature heating (direct circuit) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; domestic water preheating device; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; summer/winter two-way valve; pocket for temperature immersion probe on delivery side of primary circuit; balancing lockshield of primary circuit with double micrometrical adjustment; balancing lockshield of heating/domestic water circuit; differential overpressure by-pass valve on primary circuit; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. Model “1” with high-temperature domestic water outlet. Model “R” with hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.

IVAR

IVARSAT-H

Satellite module that independently manages high-temperature heating (direct circuit) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; domestic water preheating device; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; summer/winter two-way valve; pocket for temperature immersion probe on delivery side of primary circuit; balancing lockshield of primary circuit with double micrometrical adjustment; balancing lockshield of heating/domestic water circuit; differential overpressure by-pass valve on primary circuit; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. Model “1” with high-temperature domestic water outlet. Model “R” with hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.

Conforme à EMCS

.RFA

Distributeur pour chauf/clim

IVAR

Télécharger
IVAR IVARSAT-H VNR

IVARSAT-H VNR

Satellite module that independently manages high-temperature heating (direct circuit) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; domestic water preheating device; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; summer/winter two-way valve; pocket for temperature immersion probe on delivery side of primary circuit; balancing lockshield of primary circuit with double micrometrical adjustment; balancing lockshield of heating/domestic water circuit; differential overpressure by-pass valve on primary circuit; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. Model “1” with high-temperature domestic water outlet. Model “R” with hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor. In compliance with Belgaqua.

IVAR

IVARSAT-H VNR

Satellite module that independently manages high-temperature heating (direct circuit) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; domestic water preheating device; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; summer/winter two-way valve; pocket for temperature immersion probe on delivery side of primary circuit; balancing lockshield of primary circuit with double micrometrical adjustment; balancing lockshield of heating/domestic water circuit; differential overpressure by-pass valve on primary circuit; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. Model “1” with high-temperature domestic water outlet. Model “R” with hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor. In compliance with Belgaqua.

Conforme à EMCS

.RFA

Distributeur pour chauf/clim

IVAR

Télécharger
Flamco BSA M 8-10

BSA M 8-10

BSA clip M8-M10 x 12-13.5

Flamco

BSA M 8-10

BSA clip M8-M10 x 12-13.5

Conforme à EMCS

.RFA

Bracket

Flamco

Télécharger
Flamco BSH M 8-10

BSH M 8-10

BSH clip M8-M10 x 12-14

Flamco

BSH M 8-10

BSH clip M8-M10 x 12-14

Conforme à EMCS

.RFA

Bracket

Flamco

Télécharger
Flamco BSM M 8-10

BSM M 8-10

BSM clip M8-M10 x 12-14

Flamco

BSM M 8-10

BSM clip M8-M10 x 12-14

Conforme à EMCS

.RFA

Bracket

Flamco

Télécharger
Flamco R 1-R 7

R 1-R 7

Rail console R1 150 sendzimir

Flamco

R 1-R 7

Rail console R1 150 sendzimir

Conforme à EMCS

.RFA

Rail console

Flamco

Télécharger
Flamco E 1-E 2

E 1-E 2

E1 2m p.m. sendzimir

Flamco

E 1-E 2

E1 2m p.m. sendzimir

Conforme à EMCS

.RFA

Rail

Flamco

Télécharger
Flamco R 1-R 8

R 1-R 8

R0 2m p.m. sendzimir

Flamco

R 1-R 8

R0 2m p.m. sendzimir

Conforme à EMCS

.RFA

Rail

Flamco

Télécharger
Ostendorf HT Safe 175760-175770

HT Safe 175760-175770

Inner reducer 110/50 centric

Ostendorf

HT Safe 175760-175770

Inner reducer 110/50 centric

Conforme à EMCS

.RFA

Raccord pour sanitaire et eaux usées

Ostendorf

Télécharger
Hisense AVC-05-19

AVC-05-19

Mini 4-Way Cassette

Hisense

AVC-05-19

Mini 4-Way Cassette

Conforme à EMCS

.DWG .RFA .IFC

Climatiseur

Hisense

Télécharger
Ostendorf Skolan Safe 335975-335985

Skolan Safe 335975-335985

SKOLANsafeEP Corner branch left

Ostendorf

Skolan Safe 335975-335985

SKOLANsafeEP Corner branch left

Conforme à EMCS

.RFA

Raccord pour sanitaire et eaux usées

Ostendorf

Télécharger
Ostendorf Skolan Safe 335920

Skolan Safe 335920

SKOLANsafePA Parallel branch

Ostendorf

Skolan Safe 335920

SKOLANsafePA Parallel branch

Conforme à EMCS

.RFA

Raccord pour sanitaire et eaux usées

Ostendorf

Télécharger
DP-Pumps HU1 Premium Line DPV VFD MM

HU1 Premium Line DPV VFD MM

Pressure boosting systems

DP-Pumps

HU1 Premium Line DPV VFD MM

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU2 Premium Line DPV DOL CC

HU2 Premium Line DPV DOL CC

Pressure boosting systems

DP-Pumps

HU2 Premium Line DPV DOL CC

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU2 Premium Line DPV VFD CM CC

HU2 Premium Line DPV VFD CM CC

Pressure boosting systems

DP-Pumps

HU2 Premium Line DPV VFD CM CC

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU2 Premium Line DPV VFD MM CC

HU2 Premium Line DPV VFD MM CC

Pressure boosting systems

DP-Pumps

HU2 Premium Line DPV VFD MM CC

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU2 Premium Line DPV VFD MMe

HU2 Premium Line DPV VFD MMe

Pressure boosting systems

DP-Pumps

HU2 Premium Line DPV VFD MMe

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU3 Premium Line DPV DOL CC

HU3 Premium Line DPV DOL CC

Pressure boosting systems

DP-Pumps

HU3 Premium Line DPV DOL CC

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU3 Premium Line DPV VFD CM CC

HU3 Premium Line DPV VFD CM CC

Pressure boosting systems

DP-Pumps

HU3 Premium Line DPV VFD CM CC

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU3 Premium Line DPV VFD MM CC

HU3 Premium Line DPV VFD MM CC

Pressure boosting systems

DP-Pumps

HU3 Premium Line DPV VFD MM CC

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU3 Premium Line DPV VFD MM

HU3 Premium Line DPV VFD MM

Pressure boosting systems

DP-Pumps

HU3 Premium Line DPV VFD MM

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU3 Premium Line DPV VFD MMe

HU3 Premium Line DPV VFD MMe

Pressure boosting systems

DP-Pumps

HU3 Premium Line DPV VFD MMe

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU1 Premium Line DPV VFD MMe

HU1 Premium Line DPV VFD MMe

Pressure boosting systems

DP-Pumps

HU1 Premium Line DPV VFD MMe

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
DP-Pumps HU2 Premium Line DPV VFD MM

HU2 Premium Line DPV VFD MM

Pressure boosting systems

DP-Pumps

HU2 Premium Line DPV VFD MM

Pressure boosting systems

Conforme à EMCS

.DWG .RFA .IFC

Pompe

DP-Pumps

Télécharger
ABB Protecta Compact

Protecta Compact

Sub-distribution boards

ABB

Protecta Compact

Sub-distribution boards

Conforme à EMCS

.DWG .RFA .IFC

Installation de distribution

ABB

Télécharger
Indéfini Balcony Transit

Balcony Transit

Unspecified balcony transit

Indéfini

Balcony Transit

Unspecified balcony transit

Conforme à EMCS

.RFA

Drain

Indéfini

Télécharger
Indéfini Non-Return Valve

Non-Return Valve

Unspecified Valve

Indéfini

Non-Return Valve

Unspecified Valve

Conforme à EMCS

.RFA

Vanne

Indéfini

Télécharger
OC Waterloo OLP

OLP

Perforated Standard

OC Waterloo

OLP

Perforated Standard

Conforme à EMCS

.RFA

Grille

OC Waterloo

Télécharger
KSB KSB

KSB

Circulateurs de KSB

KSB

KSB

Circulateurs de KSB

.PLS pour Stabicad

Chauffage et Refroidissement

KSB

Voir
ELCO Trigon XXL EVO

Trigon XXL EVO

System Boiler

ELCO

Trigon XXL EVO

System Boiler

Conforme à EMCS

.DWG .RFA .IFC

Chaudière

ELCO

Télécharger
ELCO Trigon XXL SE

Trigon XXL SE

System Boiler

ELCO

Trigon XXL SE

System Boiler

Conforme à EMCS

.DWG .RFA .IFC

Chaudière

ELCO

Télécharger
ABB MISTRAL41 Multimedia for flush, hollow wall and wall mounting

MISTRAL41 Multimedia for flush, hollow wall and wall mounting

Consumer units MISTRAL41F / MISTRAL41W for flush, hollow wall and wall mounting.

ABB

MISTRAL41 Multimedia for flush, hollow wall and wall mounting

Consumer units MISTRAL41F / MISTRAL41W for flush, hollow wall and wall mounting.

Conforme à EMCS

.DWG .RFA .IFC

Distributeur pour électrique

ABB

Télécharger
ABB MISTRAL41F, flush-mounting, 1-4 Rows

MISTRAL41F, flush-mounting, 1-4 Rows

Consumer units MISTRAL41F flush 4-72 modules. The Revit Families contain several options, such as an opaque or transparent door and terminals.

ABB

MISTRAL41F, flush-mounting, 1-4 Rows

Consumer units MISTRAL41F flush 4-72 modules. The Revit Families contain several options, such as an opaque or transparent door and terminals.

Conforme à EMCS

.DWG .RFA .IFC

Distributeur pour électrique

ABB

Télécharger
ABB MISTRAL41F, hollow wall, 1-4 Rows

MISTRAL41F, hollow wall, 1-4 Rows

Consumer units MISTRAL41F hollow wall 4-72 modules. The Revit Families contain several options, such as an opaque or transparent door.

ABB

MISTRAL41F, hollow wall, 1-4 Rows

Consumer units MISTRAL41F hollow wall 4-72 modules. The Revit Families contain several options, such as an opaque or transparent door.

Conforme à EMCS

.DWG .RFA .IFC

Distributeur pour électrique

ABB

Télécharger
ABB MISTRAL41W, wall mounting, 1-4 Rows

MISTRAL41W, wall mounting, 1-4 Rows

Consumer units MISTRAL41W wall 2-72 modules. The Revit Families contain several options, such as an opaque or transparent door and terminals.

ABB

MISTRAL41W, wall mounting, 1-4 Rows

Consumer units MISTRAL41W wall 2-72 modules. The Revit Families contain several options, such as an opaque or transparent door and terminals.

Conforme à EMCS

.DWG .RFA .IFC

Distributeur pour électrique

ABB

Télécharger
ABB MISTRAL65, 65H 1-4 Rows and Switchboard, wall mounting

MISTRAL65, 65H 1-4 Rows and Switchboard, wall mounting

Consumer units MISTRAL65, 65H 1-4 Rows and Switchboard, wall mounting. The Revit Families contain several options, such as an opaque or transparent door and terminals.

ABB

MISTRAL65, 65H 1-4 Rows and Switchboard, wall mounting

Consumer units MISTRAL65, 65H 1-4 Rows and Switchboard, wall mounting. The Revit Families contain several options, such as an opaque or transparent door and terminals.

Conforme à EMCS

.DWG .RFA .IFC

Distributeur pour électrique

ABB

Télécharger
ABB ABB-tacteo Control element / Room temperature controller

ABB-tacteo Control element / Room temperature controller

TBR/U4.7.1-CG Control element 4g. w. RTC

ABB

ABB-tacteo Control element / Room temperature controller

TBR/U4.7.1-CG Control element 4g. w. RTC

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour électrique

ABB

Télécharger
ABB ABB

ABB

TA/U3.1.1-CG Room outside sensor

ABB

ABB

TA/U3.1.1-CG Room outside sensor

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour électrique

ABB

Télécharger
ABB ABB-tacteo Movement detector 180 FM Standard

ABB-tacteo Movement detector 180 FM Standard

TBW/U.1.1-CG Watchdog 180°

ABB

ABB-tacteo Movement detector 180 FM Standard

TBW/U.1.1-CG Watchdog 180°

Conforme à EMCS

.DWG .RFA .IFC

Détecteur

ABB

Télécharger
ABB ABB

ABB

SBC/U6.0.1-84 HVAC/Co2-device, 6f. CE

ABB

ABB

SBC/U6.0.1-84 HVAC/Co2-device, 6f. CE

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour chauf/clim

ABB

Télécharger
ABB ABB

ABB

SB/U8.0.1-84 8f. Control element

ABB

ABB

SB/U8.0.1-84 8f. Control element

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour chauf/clim

ABB

Télécharger
ABB ABB

ABB

SBC/U10.0.1-84 HVAC/Co2-device, 10f. CE

ABB

ABB

SBC/U10.0.1-84 HVAC/Co2-device, 10f. CE

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour chauf/clim

ABB

Télécharger
ELCO Trigon XXL ECO

Trigon XXL ECO

System Boiler

ELCO

Trigon XXL ECO

System Boiler

Conforme à EMCS

.DWG .RFA .IFC

Chaudière

ELCO

Télécharger
Indéfini Siphon

Siphon

Siphon

Indéfini

Siphon

Siphon

Conforme à EMCS

.RFA

Siphon

Indéfini

Télécharger
ABB ABB

ABB

SAF/A1.0.1-24 HVAC-control element

ABB

ABB

SAF/A1.0.1-24 HVAC-control element

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour chauf/clim

ABB

Télécharger
ABB ABB

ABB

SAR/A1.0.1-24 RT-control element

ABB

ABB

SAR/A1.0.1-24 RT-control element

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour chauf/clim

ABB

Télécharger
ABB ABB

ABB

SB/U12.0.1-84 12f. Control element

ABB

ABB

SB/U12.0.1-84 12f. Control element

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour chauf/clim

ABB

Télécharger
ABB ABB

ABB

RTR Fan Coil with Display, AP

ABB

ABB

RTR Fan Coil with Display, AP

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour chauf/clim

ABB

Télécharger
ABB ABB

ABB

TR/A 1.1 Time Receiver GPS, SM

ABB

ABB

TR/A 1.1 Time Receiver GPS, SM

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour électrique

ABB

Télécharger
ABB ABB

ABB

TKK/U.1.1-CG Card holder Konv.

ABB

ABB

TKK/U.1.1-CG Card holder Konv.

Conforme à EMCS

.DWG .RFA .IFC

Unité de contrôle pour électrique

ABB

Télécharger
Grundfos SRANGE78

SRANGE78

Pump

Grundfos

SRANGE78

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SRANGE74

SRANGE74

Pump

Grundfos

SRANGE74

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SRANGE72

SRANGE72

Pump

Grundfos

SRANGE72

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SRANGE70

SRANGE70

Pump

Grundfos

SRANGE70

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SRANGE66

SRANGE66

Pump

Grundfos

SRANGE66

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SRANGE62

SRANGE62

Pump

Grundfos

SRANGE62

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SRANGE58

SRANGE58

Pump

Grundfos

SRANGE58

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SRANGE54

SRANGE54

Pump

Grundfos

SRANGE54

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SRANGE50

SRANGE50

Pump

Grundfos

SRANGE50

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SL1000

SL1000

Pump

Grundfos

SL1000

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SEV00

SEV00

Pump

Grundfos

SEV00

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SESLFAM

SESLFAM

Pump

Grundfos

SESLFAM

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SEGFAM

SEGFAM

Pump

Grundfos

SEGFAM

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos SE100

SE100

Pump

Grundfos

SE100

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos EFFAM

EFFAM

Pump

Grundfos

EFFAM

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos DPFAM

DPFAM

Pump

Grundfos

DPFAM

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRT04

CRT04

Pump

Grundfos

CRT04

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRT02

CRT02

Pump

Grundfos

CRT02

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE64

CRNE64

Pump

Grundfos

CRNE64

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE45

CRNE45

Pump

Grundfos

CRNE45

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE32

CRNE32

Pump

Grundfos

CRNE32

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE20

CRNE20

Pump

Grundfos

CRNE20

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE15

CRNE15

Pump

Grundfos

CRNE15

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE10

CRNE10

Pump

Grundfos

CRNE10

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE05

CRNE05

Pump

Grundfos

CRNE05

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE03

CRNE03

Pump

Grundfos

CRNE03

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRNE01

CRNE01

Pump

Grundfos

CRNE01

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN90

CRN90

Pump

Grundfos

CRN90

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN64

CRN64

Pump

Grundfos

CRN64

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN45

CRN45

Pump

Grundfos

CRN45

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN32

CRN32

Pump

Grundfos

CRN32

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN20

CRN20

Pump

Grundfos

CRN20

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN1S

CRN1S

Pump

Grundfos

CRN1S

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN150

CRN150

Pump

Grundfos

CRN150

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN15

CRN15

Pump

Grundfos

CRN15

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger
Grundfos CRN120

CRN120

Pump

Grundfos

CRN120

Pump

Conforme à EMCS

.RFA

Pompe

Grundfos

Télécharger