Aldes, Balancing dampers and registers

The QuickSetter+™ manual balancing valve contains a built‑in flow meter and sight gauge, negating the need for differential pressure gauges and reference charts. Circuit balancing is fast, easy and accurate. Constructed of DZR low‑lead brass, QuickSetter+ is ideally suited for use in plumbing applications such as hot water recirculation systems. The built‑in check valve protects against circuit thermo‑siphoning. The outlet dual‑scale temperature gauge (optional) verifies the fluid temperature in the circuit. The flow meter sight gauge is dry (not exposed to the fluid) thus eliminating the possibility of gauge clouding/scaling over time. The QuickSetter+ can also be used in heating systems. Peroxide‑cured EPDM seals provide chlorine and chloramine resistance and long operating life.

Balancing Valve with Flow Meter and Temperature Gauge

IVAR RTV: thermostatic valve for controlling the water temperature in the recirculation branches. Balancing thermostatic insert with fixed point adjustment settable with graduated knob equipped with locking mechanism. Version A with only recirculation branch balancing. Version B with thermostatic control for thermal disinfection cycle. Version C with electronic thermal disinfection cycle. Connections: 1/2" F or 3/4" F. Adjustment range 35‑60 °C. ΔP maximum at the ends of the valve 1 bar. Main material: brass CW617N. Adjustment knob: ABS. O‑ring seal: peroxide EPDM.

Balancing valve with groove

Balancing valve with blind plugs

Automatic Balancing Valve

"Hydrocontrol VTR" bronze balancing valve

"Hydrocontrol VTR" bronze balancing valve

Balancing valve "Hydrocontrol MFC", cast iron

Balancing valve "Hydrocontrol MFC", cast iron

"Hydrocontrol VTR" bronze balancing valve

Balancing valve with flange/DIN

"Hydrocontrol VPR" bronze balancing valve

"Hydrocontrol VTR" bronze balancing valve

Pressure independent balancing and control valve.

Balancing valve "Hycocon VPZ", DZR brass

Balancing valve "Hydrocontrol VFC", cast iron, 2 pressure test points

Pressure independent balancing and control valve.

Balancing valve "Hycocon VTZ", DRZ brass, Rp 1/2 female

Adjustable thermal balancing valve for domestic hot water recirculation circuits.

Balancing valve "Hydrocontrol VFR", bronze, 2 pressure test points

Balancing valve "Hydrocontrol VFC", cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VFR", bronze, 2 pressure test points

Balancing valve "Hydrocontrol VFC", cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VFC", cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VFR", bronze, 2 pressure test points

Balancing valve "Hycocon VTZ", DRZ brass, G 3/4 male

Balancing valve "Hydrocontrol VFC", cast iron, 2 pressure test points

Rectangular induction VAV terminal, 6 circular outlets with balancing dampers

Balancing valve "Hydrocontrol VFC", cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VGC" 25, cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VFC" 6, cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VFC" 6, cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VFC" 6, cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VGC" 25, cast iron, 2 pressure test points

Balancing valve "Hydrocontrol VFN" 25, ductile iron, 2 pressure test points

Balancing valve "Hydrocontrol VFN" 25, ductile iron, 2 pressure test points

Circular single wall VAV terminal with provision for integral hot water reheat coil, 6 circular outlets with balancing dampers

Circular double wall VAV terminal with provision for integral hot water reheat coil, 6 circular outlets with balancing dampers

Balancing valve for the hydraulic balancing of distribution lines in central heating and cooling systems with closed circuits. Flow determination by differential pressure measurement taking into account the preset values, e.g. with the OV‑DMC3 measuring system. Installation in flow or return. In an angled version with continuously controllable, infinitely fine presetting using a non‑rising handwheel. Presetting is reproducible, lockable and sealable as standard. All functional elements on the handwheel side. Equipped with two measuring, draining and filling valves as standard. Valve housing and parts in contact with the medium made of dezincification‑resistant brass, EPDM or PTFE. Maintenance‑free, double spindle seal. Female thread on both sides according to EN 10226

Co‑axial left/right thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Angle thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Reverse thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Satellite module that independently manages low‑temperature heating (mixed circuit) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti‑scalding thermostatic mixing valve 36÷50 °C; anti‑scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti‑pollution check valve at the inlet of domestic cold water circuit; mixing valve for fixed point mixing (with thermostatic control head and remote contact probe) or outside compensated temperature mixing (with axial servomotor and control unit); three‑speed pump / model “E” with variable‑speed pump EEI<20; summer/winter two‑way valve; pocket for temperature immersion probe on delivery side of primary circuit; balancing valve on primary circuit; balancing by‑pass valve on mixed circuit; balancing lockshield of heating/domestic water circuit; hydraulic separator with built‑in check valve; shut‑off ball valve; manual air vent valve; fill‑drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. Model “1” with high‑temperature domestic water outlet. Model “R” with hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet‑metal cover (white painted) 860‑960 × 700 × 110‑160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1, 5 o 2, 5 m3/h, cold domestic water flow meter 1, 5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.

IVAR TECHNO TNB cod. 508100: mixing and boosting unit for radiant installations complete with two‑way mixing valve, balancing valve (on the cold way), fill/drain valve, manual air vent valve, two thermometers 0÷80 °C (on delivery of boiler circuit and mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M (centre distance 200 mm). Upper and lower parts made of nickel‑plated CB753S brass; pipe made of nickel‑plated half‑hard copper; gaskets and O‑rings made of peroxide‑cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T3011 included. Max differential pressure at mixing valve ends 250 mbar. Pump space 130 mm with G 1”1/2F flat seal connections.

Straight thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Satellite module that independently manages high‑temperature and low‑temperature heating (direct and mixed circuits) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti‑scalding thermostatic mixing valve 36÷50 °C; anti‑scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti‑pollution check valve at the inlet of domestic cold water circuit; mixing valve for fixed point mixing (with thermostatic control head and remote contact probe) or outside compensated temperature mixing (with axial servomotor and control unit); three‑speed pump / model “E” with variable‑speed pump EEI<20; summer/winter two‑way valve on high‑temperature and low‑temperature circuits; pocket for temperature immersion probe on delivery side of primary circuit; balancing valve on primary circuit; balancing by‑pass valve on mixed circuit; balancing lockshield of heating/domestic water circuit; hydraulic separator with built‑in check valve; shut‑off ball valve; manual air vent valve; fill‑drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. High‑temperature domestic water outlet. Hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet‑metal cover (white painted) 860‑960 × 700 × 110‑160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1, 5 o 2, 5 m3/h, cold domestic water flow meter 1, 5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.