As a MEP engineer, contractor or draftsman you know Revit can be challenging when it comes to designing MEP systems for complex BIM projects.Therefore, our Revit specialists developed productivity Apps for a better and faster Revit experience to overcome these challenges. There are different tools available that enhance existing Revit functionalities, give you access to BIM objects from your preferred manufacturers or do things you cannot do in native Revit. We’ve called these impressive tools Apps, others also talk about Revit add ins, Revit plugins or Revit add‑ons. Combining BIM software, content and Apps to get the job done.

Browse within the largest BIM library and enrich your project with manufacturer‑specific and generic BIM content! The powerful search engine allows you to find up‑to‑date graphic and parametric product information, ready to use in your BIM process. Simply load or insert 3D content directly into your Revit model or CAD drawing. Without having to leave your project environment. Free to download and use. You can download the app for free from [a href="https://store.mepcontent.com/en/product/details/2" target="_blank"]our store.

The free SANHA Product Line Placer App for Revit makes it easy to design piping systems with accurate and localized SANHA specific content.

With the Valsir Product Line Calculator for Revit it is very easy to draw Valsir supply and waste systems twice as fast with up‑to‑date and localized Valsir content. The calculations functionality for waste water systems is fully Revit integrated and EU compliant and reduces the chance of errors to a minimum with both design and calculation taking place in the App. You can download the app for free from [a href="https://www.mepcontent.com/en/apps/" target="_blank"]BIM Manufacturer Apps.

Indoor unit heat pump SYMGR AURIGA WH

Indoor and Outdoor units for Auriga‑P heat pump

POLO‑RDS Evolution Seal element DN 150, 25‑65mm

POLO‑RDS Evolution Seal element DN 150, 70‑90mm

POLO‑RDS Evolution Seal element DN 100, 63mm

POLO‑RDS Evolution Seal element dummy DN 100, dummy

POLO‑RDS Evolution Seal element DN 150, 110mm

POLO‑RDS Evolution Floor penetration DN 110

POLO‑RDS Evolution Finned pipe DN 100‑300/600mm

POLO‑RDS Evolution Fireflange DN 100‑DN 200

POLO‑RDS Evolution Seal element multiple passage DN 150, multiple passage 8‑35mm

POLO‑RDS Evolution Seal element DN 200, 160mm

POLO‑RDS Evolution Seal element dummy DN 150, dummy

POLO‑RDS Evolution Seal element DN 300, 250mm

POLO‑RDS Evolution Finned pipe DN 100‑300

POLO‑RDS Evolution Seal element DN 300, 160mm

POLO‑RDS Evolution Longbow Long bend DN 110

POLO‑RDS Evolution Seal element DN 100, 52‑58mm

POLO‑RDS Evolution Seal element multiple passage DN 100, multiple passage 8‑18mm

POLO‑RDS Evolution Seal element DN 100, 13‑50mm

POLO‑RDS Evolution Seal element DN 200, 50‑125mm

POLO‑RDS Evolution Seal element DN 300, 200mm

POLO‑RDS Evolution Seal element dummy DN 200, dummy

POLO‑RDS Evolution Seal element dummy DN 300, dummy

Corner, flush‑mounted in‑wall version. With exhaust/outside air connection ex‑works at the back. Left/right version.

Straight, ceiling or on‑wall mounted version. With exhaust/outside air connection ex‑works at the bottom. Left/right version.

Pipes and fittings from RacMet inoxPRES STEAM

Water to water heat pumps, heating only, very high temperature water production with refrigerant type R134a

Raxofix radiator connection block, for mounting in wall slot or on floor, stainless steel, Raxofix press connection Equipment galvanised steel fixing, insulating box Model 5375.31

Raxofix extension piece with SC‑Contur, for Prevista pre‑wall system, in combination with wall plate for Prevista model 8055.2, silicon bronze, press connection, Prevista plug‑in seat Note Only for Prevista pre‑wall elements and wall plate! Model 5325.78

Raxofix skirting board radiator connection piece with SC‑Contur, brass, press connection, G‑thread Equipment compression fitting G½x15 Model 5373

Raxofix cross T‑piece for heating installation with SC‑Contur, for pipe crossing while keeping required construction height, removable insulating shell element for Exzentroflex or 9 mm surrounding insulation, brass, press connections Equipment insulating box Model 5349

Base unit 230 V/24 V, for single room control of the Fonterra radiant heating and cooling systems, max. 6 room thermostats, max. 15 heating circuits, suitable for actuator model 1249, 1249.1, concealed room thermostat model 1230.5, room thermostat model 1230.2, 1230.3, 1244, without: pump module Equipment fuse 24 V, fuse 230 V Technical data IP Code IP 20 Note When using in 24V‑operation the mains adapter model 1247.5 is needed! CE‑conform in accordance with EN 60730 Model 1246

Room thermostat, for single room control of the Fonterra radiant heating and cooling systems, max. 5 actuators, suitable for base unit model 1246 Equipment controller mechanical (bimetal) with thermal recirculation Technical data IP Code IP 30 Control range 5‑30 °C CE‑conform in accordance with EN 60730 Model 1230.2

Room thermostat, for single room control of the Fonterra radiant heating and cooling systems, max. 10 actuators, suitable for base unit model 1246, 1246.1 Equipment controller mechanical (bimetal) with thermal recirculation Technical data IP Code IP 30 Control range 5‑30 °C CE‑conform in accordance with EN 60730 Model 1230.3

Base unit 230 V with pump module, for single room control of the Fonterra radiant heating and cooling systems, max. 6 room thermostats, max. 15 heating circuits, for heating and cooling function, suitable for actuator model 1249, concealed room thermostat model 1230.5, room thermostat model 1230.3, 1244 Equipment pump module, changeover contact Technical data IP Code IP 20 CE‑conform in accordance with EN 60730 Model 1246.1

Wall mounted indoor unit, with refrigerant type R410A

Wall mounted indoor unit, with refrigerant type R410A

Monobloc air‑water inverter heat pump (R290)

Monobloc air‑water inverter heat pump (R290)

Monobloc air‑water inverter heat pump (R290)

Monobloc air‑water inverter heat pump (R290)

Content for Trimble Nova is available. Please click here for more information.

Monobloc heat pump control module

Fully‑configurable and high‑efficiency air‑source reverse‑cycle rooftop unit

Fully‑configurable and high‑efficiency air‑source cooling only rooftop unit

Sanpress Inox G Wall plate with SC‑Contur, non‑corroding steel, press connection, Rp‑thread Components HNBR sealing element, fixing flange Model 0225.5

• Detector with cutting‑edge PIR technology for wall or ceiling installation. Angled installation with DM ACC B1B accessory. • The detector allows individual adjustment of its three (3) PIR sensors. • IP55: Designed for indoor or outdoor installation. • The detector can be configured in three operating modes: Motion detector, Presence detector, or Twilight switch. • Push‑in clamp terminal block, saving 60% in installation time. • ZCT (Zero Crossing Technology), switching on "zero crossing" when the 16A relay closes and opens, allowing control of large loads. • NO or NC contact status selectable from the smartphone app via Bluetooth. • Suitable for LED, fluorescent lamps, etc. • Elegant and clean design without physical potentiometers. • Application examples: residential communities, home exteriors, loading/unloading areas, and, in general, any outdoor or semi‑covered area.

• Detector with cutting‑edge PIR technology for wall installation. Angled installation with DM ACC B1B accessory. • The detector allows individual adjustment of its two PIR sensors. • IP55: Designed for indoor or outdoor installation. • The detector can be configured in three operating modes: Motion detector, Presence detector, or Twilight switch. • Push‑in clamp terminal block, saving 60% in installation time. • ZCT (Zero Crossing Technology), switching on "zero crossing" when the 16A relay closes and opens, allowing control of large loads. • NO or NC contact status selectable from the smartphone app via Bluetooth. • Suitable for LED, fluorescent lamps, etc. • Elegant and clean design without physical potentiometers. • Application examples: residential communities, home exteriors, loading/unloading areas, and, in general, any outdoor or semi‑covered area.

SE TEC 03B: • Discreet and elegant emergency lighting fixture with Autotest, for flush mounting in technical ceilings • Minimum free height required for mounting of only 40mm (above the false ceiling) • Product functionally complementary to DINUY's range of Detectors • Application: illumination of evacuation routes • Very low consumption with switched power supply • Available in white, black and grey • High‑power LED SE TEC BAT: • Replacement for SE TEC XXX lanterns • 1‑hour runtime • 4.8V/750mAh Ni‑Cd battery • IP20/IK04 protection rating

• Detector with high quality, latest generation PIR technology, for surface installation on ceilings at great heights (up to 10 m). • Configuration and adjustment via APP from your Smartphone via Bluetooth. • The detector can be configured in 3 operating modes: Motion Detector, Presence Detector or Twilight Switch. • It has a switching channel with 16A relay. • ZCT (Zero Crossing Technology), ‘zero crossing’ switching, which allows the control of large loads without damaging the relay. • NO or NC contact status selectable from the APP. • Highly sensitive PIR sensor, which detects the smallest movement within its coverage area. • Possibility of connecting several detectors in parallel to extend the detection area. • Valid for all types of loads: LEDs, Fluorescence, etc. • Elegant design • Application examples: warehouses, sports centres, halls and double or triple height areas, etc.

Profipress G Wall plate with SC‑Contur, gunmetal, press connection, Rp‑thread Components HNBR sealing element, fixing flange Model 2625.5

A smart shut‑off valve, it records water consumption, temperature and pressure in real time

Telescopic fitting push‑fit

Compact High‑Performance HRV / ERV Unit

Compact High‑Performance HRV / ERV Unit

Heat recovery ventilation unit, ceiling mounted

Heat recovery ventilation unit, ceiling mounted

Synthetic manifold (blue, green, red) that can be assembled modularly

Synthetic manifold that can be assembled modularly

Composite EcoFlow Manifold

Stainless Steel Premium Open LT W320 Manifold

Composite Premium Open LT W500 Manifold

Composite Premium Open LT U500 Manifold

Stainless Steel Premium Open LT U320 Manifold

Chiller, air source for outdoor installation with refrigerant type R134a

Chiller, air source for outdoor installation with refrigerant type R513A

Radiator connection piece, matt nickel‑plated brass, G‑thread, Viega plug‑in seat, conversion from double‑pipe to single‑pipe system, blockable, straight way valve Components polygon Model 1096.0

Radiator connection piece, matt nickel‑plated brass, G‑thread, Viega plug‑in seat, blockable, angled Components polygon Model 1097.5

Radiator connection piece, matt nickel‑plated brass, G‑thread, Viega plug‑in seat, blockable, straight way valve Components polygon Model 1096.5

Mounting unit, for Junkers gas combination boilers, press connections, Rp‑threads Components connection elbow for gas with threaded connection – all other elbows with press connection, short gunmetal or silicon bronze elbow, EPDM sealing elements, leaking water connection, galvanised steel (offset) mounting bracket Note When gas connection Rp¾ or Rp1 is required, please replace the Rp½ elbow! Model 2229

Sanpress Inox Crossover with SC‑Contur, non‑corroding steel, plug‑in end, press connection Components EPDM sealing element Model 2327

Sanpress Inox Wall plate with SC‑Contur, non‑corroding steel, press connection, Rp‑thread Components EPDM sealing element, fixing flange Model 2325.5

Radiator connection piece, matt nickel‑plated brass, G‑thread, Viega plug‑in seat, conversion from double‑pipe to single‑pipe system, blockable, angled Components polygon Model 1097.0

Sanpress Inox Wall plate T‑piece with SC‑Contur, non‑corroding steel, press connections, Rp‑threads Components EPDM sealing elements, fixing flange Model 2317.3

Profipress Crossover with SC‑Contur, copper, plug‑in end, press connection Components EPDM sealing element Model 2427

Profipress Crossover with SC‑Contur, copper, press connections Components EPDM sealing elements Model 2428

Radiator connection block, for radiator connection out of the wall, radiator mounting after finishing all plastering, tiling, screed and painting work Components insulating box, stainless steel pipe d15 Model 1097.6

Sanpress Inox Double wall plate with SC‑Contur, non‑corroding steel, press connections, Rp‑thread Components EPDM sealing elements, fixing flange Model 2325.7

Sanpress Wall plate T‑piece with SC‑Contur, silicon bronze, press connections, Rp‑thread Components EPDM sealing elements, fixing flange Model 2217.3

Sanpress Double wall plate with SC‑Contur, silicon bronze, press connections, Rp‑thread Components EPDM sealing elements, fixing flange Model 2228.7

Sanpress Wall plate with SC‑Contur, silicon bronze, press connection, Rp‑thread Components EPDM sealing element, fixing flange Model 2225.5

Vertical Lossnay Fresh Air Heat Recovery Ventilation with extra option between Silencer Box P‑500SB‑E or Air Cooler CP‑500CM

Vertical Lossnay Fresh Air Heat Recovery Ventilation with extra option between Silencer Box P‑500SB‑E or Air Cooler CP‑500CM

High efficiency wall hung gas boiler

Room thermostat, LS 990, white

Relay switch, LS 990, white

LED floor pilot light, LS 990, white

Hotelcard switch, LS 990, white

Hotelcard switch RFID, LS 990, white

2‑gang switch with indicator light, LS 990, white

2‑gang push‑button, LS 990, white