Elbow with Wallnut

Double Elbow with Wallnut

Flexible Tube

Pre-Formed Pipe Bridge

Pipe Bridge

FF Pipe Bridge

Air Tube Pipe Bridge

Roth Thermaset Distributor

Roth RIS Comprehensive drinking water and heating installation with the Roth pipe installation system

Double wall union, female, two outlets

Wall union, female

Wall union passage, female

Body and eye shower, wall mounted, modular

Wall plate elbow 90° FF

Condensate drain

Reservoir available in white, umbra, black and sand

Concealed cistern for bidet

Concealed cistern for urinal

Manifold with 8 connections

Manifold with 8 connections

Firenze trap with access

Double increaser

87°30’ corner branch

Parallel branch

Bend for trap connection with cap, without grommet

Bend for trap connection with cap, without grommet

Grey bend with right inlet

Grey bend with two inlets

Grey bend with left inlet

87°30’ bend with front inlet with seal

Back to back connector for trap with caps

Unspecified Urinal Control

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Dimensions (W x H x D): 295 x 290 x 75 mm.

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Box dimensions (W x H x D): 500 x 350 x 90 mm.

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with manifolds, box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass (externally zinc-plated). Manifolds material: CW617N brass (externally zinc-plated). Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: EUROK. Box dimensions (W x H x D): 500 x 350 x 90 mm.

Inner reducer 110/50 centric

SKOLANsafeEP Corner branch left

SKOLANsafePA Parallel branch

Unspecified balcony transit

Round Straight

Combo branch DN 90x75x90

With this new free app you can now quickly and easily design POLOPLAST sanitary systems in Revit, complete with a cutting list, fitting list and article data. Setting up a complete piping system is done very fast due to the autorouting app functionality. This means that bends, tees, reducers and couplings will be placed automatically while drawing. The App grants you immediate access to localized and up-to-date Poloplast products. The App includes the following product lines: POLOPLAST, POLO-KLIMA, POLO, ECOSAN, POLO-KAL XS, POLO-KAL 3S, POLO-KAL NG You can download the app for free from [a href="https://store.mepcontent.com/Product/Details/51" target="_blank"]our store[/a].

Transition pipe inside - inside 160-110

Adapter deccoupled DN 32 IG 1"

Transition pipe 90/110 centric

Adapter screw connection DN 32 to screw nut 1"

Adapter screw connection DN 32 to screw nut 1"

Tee piece DN 110

DN 110x75x50x50

Condensate drainage connection DN 110x1/2''

Condensate drainage connection DN 110-100x1/2''

Corner double branch DN 90x50x90

Combo branch DN 110x110x110

Vertical double branch DN 90x90x50

Corner double branch DN 90x50x90

Condensate drainage connection DN 40

Condensate drainage connection DN 32

Siphon-fitting DN 32 1 1/4"

Parallel branch DN 110x110

Parallel branch DN 90x90

Parallel branch DN 90x90

Flange sleeve DN 75

Misting attachment DN 110

Ventilation elbow DN 110

Siphon-elbow long DN 40/50 1 1/4"

Siphon-elbow DN 32 1 1/4''

Vertical double branch DN 90x90x50

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Orientable terminal for EASY LOCK modular manifolds complete with drainage valve and automatic air vent valve. Material: nichel plated brass. Size: M 1/2".

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Single bracket for EASY LOCK modular manifolds. Made of zinc plated steel. Two different sizes: DN 20 or DN 25.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Single bracket for EASY LOCK modular manifolds. Made of zinc plated steel. Two different sizes: DN 20 or DN 25.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Double bracket for EASY LOCK modular manifolds. Made of zinc plated steel. Axle spacing: 200 mm. Two different sizes: DN 20 or DN 25.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Plastic box with bottom and fastening kit for coplanar and modular manifolds. Two different sizes: DN 20 or DN 25.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Plastic box with bottom for modular manifolds (without fastening kit, to order separately). H: from 350 to 400 mm. W: from 350 to 800 mm. D: from 90 to 95 mm. With/without protection for plastering operations.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Modular plain manifold EASY LOCK series. Manifolds can be used to supply DCW or DHW. The body is made of brass CW617N nickel-plated only externally. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 100°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F. Secondary connections: EUROK or 1/2"M or 1/2"M TP (flat seal). Sizes available: from 2 to 5 ways.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Modular plain manifold EASY-LOCK series. Manifolds can be used to supply DCW. The body is made of brass CW617N nickel-plated only externally. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 100°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F. Secondary connections: EUROK or 1/2"M or 1/2"M TP (flat seal). Sizes available: from 2 to 4 ways.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Modular plain manifold EASY-LOCK series. Manifolds can be used to supply DHW. The body is made of brass CW617N nickel-plated only externally. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 100°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F. Secondary connections: EUROK or 1/2"M or 1/2"M TP (flat seal). Sizes available: from 2 to 4 ways.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Modular plain manifold EASY-LOCK series. Manifolds can be used to supply DCW or DHW. The body is made of brass CW617N nickel-plated only externally. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 120°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F. Secondary connections: EUROK or 1/2"M or 1/2"M TP (flat seal). Sizes available: from 2 to 4 ways.

Manifold with 8 connections

You can now quickly and easily design Ostendorf sanitary systems in Revit with this new free app. Setting up a complete system is done very fast due to the autorouting app functionality. This means that bends, tees, reducers and couplings will be placed automatically while drawing. The app grants you immediate access to localized and up-to-date Ostendorf products. Download the free app now and start saving time designing Ostendorf systems! The following product lines are available in the App: Ostendorf Kunststoffe HT Safe, Ostendorf Kunststoffe Skolan Safe. You can download the app for free from [a href="https://store.mepcontent.com/Product/Details/50" target="_blank"]our store[/a].

Urinal element

Medical tap points: -Compressed Air medical -Compressed Air Technical -Laughing gas -Nitrogen -Oxygen -Vacuum

Water Tap

Model 8320-8325, combination shower and eye/face wash with AXION® MSR eye/face wash and showerhead, with a green ABS receptor.

Model 8317CTFP, 120 VAC cable heated, freeze protected, combination shower and eye/face wash, with top or bottom supply, and with AXION® MSR eye/face wash and showerhead.

Model 8300-8309, combination emergency shower & eye/face wash with AXION® MSR eye/face wash and showerhead.

A wall plate, which is attached to the wall or placed in the wall, forms the transition between the pipe and a tap. In the family, the angle between the connectors is adjustable.

A wall plate, which is attached to the wall or placed in the wall, forms the transition between the pipe and a tap.

A wall plate, which is attached to the wall or placed in the wall, forms the transition between the pipe and a tap. In the family, the angle between the connectors is adjustable.

A wall plate, which is attached to the wall or placed in the wall, forms the transition between the pipe and a tap.

Bracket for disabled

Faucet

SANHA 3fit-Press wall plate

SANHA 3fit-Press wall plate

NiroSan wall plate

NiroSan wall plate

PURAPRESS Installation set