Browse within the largest BIM library and enrich your project with manufacturer-specific and generic BIM content! The powerful search engine allows you to find up-to-date graphic and parametric product information, ready to use in your BIM process. Simply load or insert 3D content directly into your Revit model or CAD drawing. Without having to leave your project environment. Free to download and use. You can download the app for free from [a href="https://store.mepcontent.com/en/product/details/2" target="_blank"]our store[/a].

With the Valsir Product Line Calculator for Revit it is very easy to draw Valsir supply and waste systems twice as fast with up-to-date and localized Valsir content. The calculations functionality for waste water systems is fully Revit integrated and EU compliant and reduces the chance of errors to a minimum with both design and calculation taking place in the App. You can download the app for free from [a href="https://www.mepcontent.com/en/apps/" target="_blank"]BIM Manufacturer Apps[/a].

Water cooled chiller with refrigerant type R410A

RIIFO MULTIPROFILE PRESS F18 FITTINGS

Reversible direct expansion air handling unit combined with Mr. Slim

POLYMELT ECOSAN

POLYMELT MECHANICAL

Backflow protection unit TBE-STBA

TBE-IVC / 15x15 mm compression / DN15 / PN10 / 8 bar / brass / Kiwa

TBE-IC / 15x15 mm compression / DN15 / PN10 / 8 bar / brass / Kiwa

Three-Way Valve

Ball Valve

Ball Valve

Clamp for InoxPres pipe

Clamp with rubber for InoxPres pipe

Pipe bridge

Pipe bridge FF

Pipe bridge FF

Pipe bridge MF

Pipe bridge MF

KE KELIT STEELFIX C-STEEL

KE KELIT KELOX ULTRAX

KE KELIT KELOX PROTEC

KE KELIT KELOX PPSU

KE KELIT CLIMATEFIX

KE KELIT COPPERFIX

KE KELIT STEELOX

KE KELIT KETRIX

KE KELIT KELEN PP-RCT LX-SENSO

KE KELIT KELEN PP-RCT

KE KELIT STEELFIX STAINLESS STEEL

KE KELIT KELOX PPSU-W

High efficiency water cooled chiller

High efficiency water cooled chiller with refrigerant type R1234ze

Water cooled chiller with refrigerant type R1234ze

Expansion Vessel

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6,3 …7,5 M3] , Brass, Swivel design, including Airvent

Air vent valve with lateral purge

Circulation unit / shunt unit / pump group, premanufactured and ready-to-use plug-and-play for applications like radiator, ventilation and floor heating systems Temp. range: +5 – +110 °C, Max. pressure: 1,0 Mpa.

Circulation unit / shunt unit / pump group, premanufactured and ready-to-use for applications like radiator, ventilation and floor heating systems,with heat insulation. Temp. range: +5 – +110 °C, Max. pressure: 1,0 Mpa.

Straight automatic air vent valve for high pressure, 1/2" F connection

Circulation unit / shunt unit / pump group, premanufactured and ready-to-use plug-and-play for cooling applications like, ventilation and floor cooling systems insulated with AF/Armaflex AF-2 as standard.Temp. range: -20 – +80 °C, Max. pressure: 1,0 Mpa.

Connection DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 10 - 150 m3/h, fully insulated

Connection DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 10 - 150 m3/h, NOT insulated

Dirt, Magnetite and Air Combi Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8,7 …13,9 M3] , Brass, Swivel design

Dirt and Magnetite Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8,7 …13,4 M3] , Brass, Swivel design

Air and Microbubble Separator with Cu22, Cu28, ¾" of 1" connection PN10, Max Kv [6,3 …7,5 M3] , Brass, Swivel design

Dirt and Magnetite Separator with DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 9,2 - 89,8 m3/h, with insulation

Dirt and Magnetite Separator with DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 9,2 - 89,8 m3/h, without insulated

Air and Microbubble Separator with DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 9,2 - 89,8 m3/h, with insulation

Air and Microbubble Seperator with DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 9,2 - 89,8 m3/h, without insulated

Dirt and Magnetite Separator with ¾", 1", 1¼", 1½" or 2" connection PN10, Max Kv [13,2 …73,1 M3] , Brass

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6,3 …7,5 M3] , Brass, Swivel design

The free SANHA Product Line Placer App for Revit makes it easy to design piping systems with accurate and localized SANHA specific content. Just click and draw and the right fittings are automatically added to your piping system. And if you want to make advanced connections with real fittings rather than custom fittings, it takes only a few clicks. Even more, you can use the in-app predefined schedules and order your items directly from the material lists with a guaranteed up-to-date content You can download the app for free from [a href="https://www.mepcontent.com/en/apps/" target="_blank"]BIM Manufacturer Apps[/a].

Water cooled chiller with refrigerant type R513A

Water cooled chiller with refrigerant type R134a

Chilled water production group, water/water with refrigerant type R1234ze

Water cooled chiller with refrigerant gas R454B

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems with automatic water-refilling. Max/min system pressure: +0,7 - 5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water. Max system vol: 50 m3

Vacuum degasser for removal of dissolved gasses in cooling and freezing systems down to -10C. Max/min system pressure: +0,7 - 5 bar, PN10. Temp. Range: -10C - +70C. . Allowed media: Water, Glycol mix, saline solution, etc.

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems. Max/min system pressure: +0,7 - 5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water, Ethanol. Max system vol: 50 m3

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems. Max/min system pressure: +0,7 - 2,5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water, Ethanol. Max system vol: 25 m3

Set of connector T-pieces for inlet and return flow copper

Copper pipe according to DIN EN 1057

Coupling

Suction nozzle for single pipe heating

Set of connector T-pieces for return flow copper

Set of connector T-pieces for inlet and return flow, with union connector for Euro cone

Set of connector T-pieces for inlet and return flow

Adaptor with clamping ring for corrugated pipes, NPW, plain end

Set of connector T-pieces for return flow copper

Adaptor with female thread and plain end

Union

Axial expansion fitting with pressing sockets

Connector end pieces for inlet and return flow, long

Adaptor union nut

Adaptor union with male thread

Union connector for Euro cone

Adaptor with female thread

Adaptor union with female thread

Connector T-pieces for inlet and return flow, long

Anschluss with union nut

Adaptor with male thread and plain end

Adaptor with male thread

Loose flange PN 10

Loose flange PN 16

Adaptor with plain end and weld-on

Flange PN 10, with pressing socket

Flange PN 10, with plain end

Flange PN 6, with plain end

Flange PN 16, with pressing socket

Flange PN 16, with plain end

T-piece with female thread and plain ends

Cross reduced

Cross reduced, offset

Cap