High‑efficiency triple‑action magnetic dirt separator: cyclonic action ensured by patented internal insert, developed to guide the flow of the boiler fluid so as to maximize slow‑down and settling of debris; subsequent removal of ferrous particles via dual neodymium bar magnet with magnetic field of 2 x 12000 G; mechanical filtration provided by 800 μm mesh strainer. Internal components are fully inspectable, and can be removed and washed by removing the lower body. Manual air bleed valve. Swivel fitting for installation on pipes in different orientations; can be loosened and tightened by hand. Allows for installation on horizontal, vertical or oblique lines. Fin on magnetic insert. Materials: body in Grivory, cyclonic insert in PA66 30% glass fiber; connection tee in Technyl A218 V30; mesh strainer in stainless steel AISI 304; seals in EPDM perox. Compatible fluids: water; water + glycol solution (max. 50%). Maximum recommended flow rate 2.2 m3/h. Maximum pressure: 3 bar. Operating temperature: 0‑90°C.

IVAR Dirtstop® XL: triple effect magnetic dirt separator: cyclonic action guaranteed by a patented internal insert, developed to guide the fluid directed to the boiler in order to maximize the slowing down and decantation of the debris; subsequent removal of ferrous particles by means of a neodymium magnet, magnetic field 14000 G; mechanical filtration with an 800 μm mesh filter (pre‑ assembled 500 μm filter for the first cleaning of the system). Internal components completely inspectable, removable and washable by removing the upper plug, with the special lever provided. Manual air vent valve. Draining valve with opening lever and tap. Swivel fitting for mounting to the pipeline in different orientations, with the special lever provided. Allowed installation on horizontal, vertical or oblique lines. Buttonhole on magnetic insert, sealing band supplied. Materials: body, cyclonic insert and cap in PA66 + GF 30%; ''T'' joint and locking ring nut in PA66 + GF 30%; filters in stainless steel AISI 304; seals in peroxide EPDM. Compatible fluids: water; water + glycol max 50%. Maximum recommended flow rate: 2.13 m3/h. Maximum operating pressure: 3 bar. Operating temperature: 0‑90 °C. Flow coefficient Kv: 6.7 m3 /h. Connections: Ø22 x Ø22 copper pipe (520124); 3/4'' F x 3/4'' F (520135); 1''F x 1'' F (520136); 1''1/4 F x 1''1/4 F (520139).

IVAR NEOVENT deaerator range designed to ensure continuous and effective removal of air from hydraulic circuits in HVAC and heating systems. Material: brass. Maximum operating pressure: 10 bar. Maximum discharge pressure: 10 bar. Fluid temperature: 0 °C +110 °C. Operating modes: automatic, manual, closed. Installation position: vertical only.

IVAR NEOVENT air vent valves are designed to remove air that accumulates within HVAC system circuits. Material: brass. Maximum operating pressure: 10 bar. Maximum discharge pressure: 10 bar. Fluid temperature: 0 °C +110 °C. Body fully orientable at 360°. Operating modes: automatic, manual, closed. Installation position: vertical only.

IVAR NEOVENT deaerator range designed to ensure continuous and effective removal of air from hydraulic circuits in HVAC and heating systems. Material: brass. Maximum operating pressure: 10 bar. Maximum discharge pressure: 10 bar. Fluid temperature: 0 °C +110 °C. Operating modes: automatic, manual, closed. Orientable tee connection.

IVAR Dirtstop® mini magnetic dirt separator with transparent filter chamber; compact design, with connection union for installation below the boiler. The dual filter action is provided by a neodymium magnet (magnetic induction B = 1.2 T (12, 000 G)) and an 800 μm AISI 304 stainless‑steel mesh strainer. The neodymium magnet is diametrically polarised and provides a homogeneous magnetic field which maximises the capture of ferrous impurities. The mesh filter captures all other impurities. Impurities, which precipitate out in the transparent filtration chamber, can then be emptied without draining the heating system if the check valve is installed on the boiler inlet. Materials – Body: Grilamid. Ball‑type shutoff valve, swivel union and caps: CW617N brass. Sealing elements: peroxide‑cured EPDM. Temperature: 0, 90 °C. Max pressure: 3 bar. Compatible with water or glycol solution, max. 50%. Flow factor Kv: 5 m³/h. Filter connections 3/4" M x 3/4" M, Fitting connections (swivelling): 3/4" F x3/4" F. Check valve provided in the package with code 520550, not included with code 520555.

Brass dirt filter with magnet and MultiMode Swivel for heat pump systems.

A steel (microbubble) deaerator and dirt separator for standard flow rate (1.5 m/s) with a DN50, DN300 PN16 connection

A steel dirt separator for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel low loss header with (microbubble) deaerator and dirt separator with magnet with a DN50, DN300 PN16 flange connection

A steel low loss header with (microbubble) deaerator and dirt separator with a DN50, DN300 connection

A steel dirt separator with magnet for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator and dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator and dirt separator with magnet for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A demountable steel (microbubble) deaerator and dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator for high flow rate (3 m/s) with a DN50, DN300 PN16 connection

A steel dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

A brass dirt separator with a 22 mm, 2" horizontal connection

A brass dirt separator with magnet and a 22 mm, 2" universal connection

A brass low loss header with (microbubble) deaerator and dirt separator with a 1", 1½" connection and magnet

Hydraulic deaerator and dirt separator

A small brass dirt separator with magnet and a 22 mm, 1" universal connection.

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design, including Airvent

Connection DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 10, 150 m3/h, fully insulated

Connection DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 10, 150 m3/h, NOT insulated

Dirt, Magnetite and Air Combi Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8, 7 …13, 9 M3], Brass, Swivel design

Dirt and Magnetite Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8, 7 …13, 4 M3], Brass, Swivel design

Air and Microbubble Separator with Cu22, Cu28, ¾" of 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design

Dirt and Magnetite Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, with insulation

Dirt and Magnetite Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, without insulated

Air and Microbubble Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, with insulation

Air and Microbubble Seperator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, without insulated

Dirt and Magnetite Separator with ¾", 1", 1¼", 1½" or 2" connection PN10, Max Kv [13, 2 …73, 1 M3], Brass

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design

Partial flow filter for continuous cleaning of the system for central heating and cooling installations

Partial flow filter for continuous cleaning of the system for central heating and cooling installations

A brass (microbubble) deaerator and dirt separator with a magnet and a 22 mm, 1" universal connection

A brass (microbubble) deaerator with a 22 mm, 2" universal connection

A brass air vent for heating‑ and cooling systems with a ½" connection

Side mounted valve

A brass (microbubble) deaerator with a 22 mm, 2" horizontal connection

Oil separator

Oil separator with silt storage

Grease and starch separator

Grease seperator with silt storage

Sandfilter for swimming pool

Prefilter for swimming pool

Grease trap