Heat pump outdoor unit

Heat pump outdoor unit

FTC5 cylinder for ecodan split units

Heat pump outdoor unit

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 pre-plumbed Standard cylinders for Ecodan

FTC5 pre-plumbed Solar cylinders for Ecodan

FTC5 pre-plumbed Slimline cylinders for Ecodan

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Dry chiller outdoor unit

Heat pump outdoor unit

RAC Single system - Outdoor Unit - Connectable with wall mounted indoor unit Diamond series (ZR) - Design flexibility optimised with a compatible piping length up to 30 m - Wide range of operation down to -15 degC and up to 46 degC in cooling (24 degC in heating) - Product range available with R32 (-W) and R410A (-S) refrigerants

RAC Single system - Outdoor Unit - Connectable with Floor Standing, Ceiling Concealed and Compact Ceiling Cassette indoor units - Wide range of operation down to -15 degC and up to 46 degC in cooling (24 degC in heating) - Design flexibility optimised with a compatible piping length up to 30 m (size 50) and up to 15 m (sizes 25 and 35)

RAC Single system - Outdoor Unit - Connectable with wall mounted Premium series (ZS), Ceiling Concealed and Compact Ceiling Cassette - Design flexibility optimised with a compatible piping length up to 25 m (size 50) and up to 15 m (sizes 20, 25 and 35) - Wide range of operation down to -15 degC and up to 46 degC in cooling (24 degC in heating) - Product range available with R32 (-W) and R410A (-S) refrigerants

RAC Multi system - Outdoor Unit - High seasonal efficiency thanks to the application of inverter technology - Flexibility of installation with a total pipe length of 90 m and up to 6 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels

RAC Multi system - Outdoor Unit - High energy efficiency with the use of R32 refrigerant (A++ in heating) - Flexibility of installation with a total pipe length of 70 m and up to 4 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels - Wide range of operation down to -15 degC and up to 46 degC in cooling (24 degC in heating)

RAC Multi system - Outdoor Unit - High seasonal efficiency thanks to the application of inverter technology - Flexibility of installation with a total pipe length of 70 m and up to 4 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels

RAC Multi system - Outdoor Unit - High seasonal efficiency thanks to the application of inverter technology - Flexibility of installation with a total pipe length of 40 m and up to 3 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels

RAC Multi system - Outdoor Unit - High seasonal efficiency thanks to the application of inverter technology - Flexibility of installation with a total pipe length of 40 m and up to 3 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels

RAC Multi system - Outdoor Unit - High energy efficiency with the use of R32 refrigerant (A+++ in cooling) - Flexibility of installation with a total pipe length of 40 m and up to 3 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels - Wide range of operation down to -15 degC and up to 46 degC in cooling (24 degC in heating)

RAC Multi system - Outdoor Unit - High seasonal efficiency thanks to the application of inverter technology - Flexibility of installation with a total pipe length of 30 m and 2 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels

FTC5 packaged hydrobox for ecodan monobloc units

FTC5 packaged hydrobox for ecodan monobloc units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

FTC5 cylinder for ecodan split units

Cylinder for ecodan split units

NIBE S1255 is an intelligent, inverter-controlled ground source heat pump with integrated water heater. 

The NIBE S1155 PC is an intelligent, inverter-controlled ground source heat pump with integrated passive cooling. The heat pump is easy to install even in locations with low ceilings, since the hot water tank is separate and is chosen according to hot water requirements. 

The NIBE VVM 225 is designed for combination with NIBE air/water heat pump to create a highly- efficient climate system for your home. The NIBE VVM 225 has a smart, user-friendly control system which provides efficient heating and hot water with high performance. 

The NIBE VVM S320 is designed for combination with any NIBE air/water heat pump to create a highly efficient climate system for your home. The NIBE VVM S320 has a smart, user-friendly control system which provides efficient heating/ cooling and hot water with high performance.

NIBE S1255 PC is an intelligent, inverter-controlled ground source heat pump with integrated passive cooling and an integrated hot water tank.

The NIBE S1155 is an intelligent, inverter-controlled ground source heat pump without an integrated hot water tank, making it easy to install in properties with lower ceilings. A separate hot water tank is selected according to hot water requirements.

NIBE F370 is an all-in-one exhaust air heat pump which provides heating, ventilation, heat recovery and hot water efficiently, simply and economically.

NIBE F470 is an all-in-one exhaust and supply air heat pump which provides heating, ventilation, heat recovery and hot water efficiently, simply and economically. 

Micro KXZ Heat pump VRF outdoor Unit -Connect up to 10 indoor units/up to 150% capacity. -High efficiency with COP (in cooling) up to 4.44 -These units employs DC inverter compressors ONLY. -Total piping length up to 100m and a maximum pipe run of 70m.

Heat pump hyper inverter - Outdoor unit - Hyper Inverter range (high efficiency) from 10 to 14 kW in cooling mode - More environmental friendly thanks to the use of R32 refrigerant - Leading powerful heating capacity in the industry thanks to expansion valve control and twin rotary compressor technology - High efficiency in both cooling and heating by achieving energy labels A++ - The innovative fin configuration (M shape) offers an optimal balance between heat transfer and airflow - Wide range of operation down to -20 ?C in heating and -15 ?C in cooling - Design flexibility optimised with a compatible piping length up to 100 m with a precharged piping length of 30 m

Domestic hot water heat pump

Ground source heat pump for larger properties

Inverter-controlled ground source heat pump for larger properties

Domestic hot water booster heat pump

Heat pump hyper inverter - Outdoor unit - Hyper Inverter range (high efficiency) from 10 to 14 kW in cooling mode - Leading powerful heating capacity in the industry thanks to expansion valve control and twin rotary compressor technology - High efficiency in both cooling and heating by achieving energy labels A++ - The innovative fin configuration (M shape) offers an optimal balance between heat transfer and airflow - Wide range of operation down to -20 ?C in heating and -15 ?C in cooling - Design flexibility optimised with a compatible piping length up to 100 m with a precharged piping length of 30 m

FTC5 hydrobox for ecodan split units

FTC5 hydrobox for ecodan split units

Heat pump outdoor unit

Heat pump outdoor unit

KXZRX Hi-COP Heat Recovery VRF outdoor unit -Simultaneous heating and cooling operations of individual indoor units. Maximum energy efficiency: COP 4.76 -Energy efficiency is maximised by employing Multi-port DC Inverter compressor with concentrated electric winding -Total piping length up to 1000m and a maximum pipe run of 160m. - Wide range of controls, central controls and BMS systems are available.

KXZR Heat Recovery VRF outdoor unit -Simultaneous heating and cooling operations of individual indoor units. -Energy efficiency is maximised by employing Multi-port DC Inverter compressor with concentrated electric winding -Total piping length up to 1000m and a maximum pipe run of 160m. - Wide range of controls, central controls and BMS systems are available.

Hot water boiler with 220 l capacity

Hot water heat pump

Heat pump micro inverter - Outdoor unit - The Micro Inverter range offers products from 10 to 14 kW in cooling mode with high seasonal performance up to level A++ - Wide range of operation down to -20 C in heating and -15 C in cooling - Component technology contributing to environmental protection with a range operating with R32 (-W) and another with R410A - High efficiency performance and low vibration thanks to the use of DC twin rotary compressor technology - Equipped with a silent mode offering 6 dB less compared to standard operation - Design flexibility optimised with a compatible piping length up to 50 m and a precharged piping length of 30 m

Heat pump standard inverter - Outdoor unit - The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode - Component technology contributing to environmental protection with a range operating with R32 (-W) and another with R410A - Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion - Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump standard inverter - Outdoor unit - Standard Inverter range offers high seasonal performance up to level A++ in cooling mode - Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion - Design flexibility optimised with a compatible piping length up to 30 m with a precharged piping length of 15 m

Heat pump standard inverter - Outdoor unit - The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode - Component technology contributing to environmental protection with a range operating with R32 (-W) - Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion - Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump micro inverter - Outdoor unit - Supplies 24 kW under standard cooling mode conditions and operates efficiently in extreme conditions down to -15 C - Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping - Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation - Plastic cover is mounted over control boards in standard to facilitate the maintenance - Design flexibility optimised with a compatible piping length up to 70 m and a precharged piping length of 30 m

Heat pump standard inverter - Outdoor unit - The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode - Component technology contributing to environmental protection with a range operating with R32 (-W) and another with R410A - Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion - Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump micro inverter - Outdoor unit - Supplies 19 kW under standard cooling mode conditions and operates efficiently in extreme conditions down to -15 C - Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping - Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation - Plastic cover is mounted over control boards in standard to facilitate the maintenance - Design flexibility optimised with a compatible piping length up to 70 m and a precharged piping length of 30 m

Heat pump hyper inverter - Outdoor unit - Leading powerful heating capacity in the industry thanks to expansion valve control and twin rotary compressor technology - High efficiency in both cooling and heating by achieving energy labels up to level A++ - Wide range of operation down to -20 C in heating and -15 C in cooling - Advanced technology contributing to environmental protection with a range operating with R32 (-W1) and another with R410A (S) - Design flexibility optimised with a compatible piping length up to 50 m and a precharged piping length of 30 m

Heat pump boiler

Heat pump boiler

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Heat pump outdoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Ecodan split air source heat pump Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Heat pump outdoor unit

Split-type air source heat pump

Split air source heat pump

Split air source heat pump

Split air source heat pump

Split air source heat pump

Split air source heat pump

Split air source heat pump

Split air source heat pump

The HBS 05-16 indoor unit should be connected to AMS 10-16. NIBE HBS 05 is an intelligent and compact inverter-controlled air/water heat pump. The outdoor module NIBE AMS 10 is connected with refrigerant pipes to the NIBE HBS 05 split box, which is located indoors. NIBE HBS 05 is designed to be combined with a NIBE indoor module, VVM, or NIBE control unit, SMO, to create a high efficient indoor climate system.