IVAR FCU‑Kit: Pre‑assembled brass multi‑function bypass unit for fan‑coil systems, chilled beams, heaters and other constant flow rate conditioning systems. Can be used for both heating and cooling. Consisting of: a pair of three‑way valves for setting 5 different operating modes, a mesh filter, two loading/unloading taps, a Venturi orifice with a pair of piezometric sockets and a PICV flow regulator. Permissible differential pressure ranges and flow control range (for PICV): with PICC 03 cartridge (code 590123) 16‑ 200 kPa, 37‑575 l/h; with PICC 03 cartridge (code 590124) 30‑400 kPa, 64‑1110 l/h. Mesh filter (500 μm) in stainless steel AISI 304. Connections to the primary circuit (with unions): 1/2 "F (DN 15), 3/4 "F (DN 20). Connections to the secondary circuit: 1/2 "F (DN 15), 3/4 "F (DN 20). Maximum operating pressure: 10 bar. Maximum operating temperature: 120 °C. Available with insulation shell in grey ARPRO 5135 FR with conductivity 0.037 W/mK, density 50 kg/m3, reaction to fire class HF‑1 according to UL‑94 standard.

IVAR TECHNO TNB cod. 508100: mixing and boosting unit for radiant installations complete with two‑way mixing valve, balancing valve (on the cold way), fill/drain valve, manual air vent valve, two thermometers 0÷80 °C (on delivery of boiler circuit and mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M (centre distance 200 mm). Upper and lower parts made of nickel‑plated CB753S brass; pipe made of nickel‑plated half‑hard copper; gaskets and O‑rings made of peroxide‑cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T3011 included. Max differential pressure at mixing valve ends 250 mbar. Pump space 130 mm with G 1”1/2F flat seal connections.

IVAR Dirtstop®: Swivelling magnetic dirt separator with double filtering action, compact, with connection kit for the installation under the boiler. The double filtering action, guaranteed in any position thanks to the swiveling insert (Patent Pending), is performed by a neodymium magnet (magnetic induction B = 1, 2 T (12.000 G)) and a mesh strainer (800 μm) made of AISI 304 stainless steel. The neodymium magnet is diametrically polarized and therefore it develops a homogeneous magnetic field which maximizes the capture of ferrous impurities. The mesh strainer retains all impurities. Impurities precipitate into the large settling chamber at the bottom of the dirt separator. The evacuation of impurities is possible without emptying the system and disassembling the dirt separator, thanks to the removable magnet and to the opening of a 360° swiveling shut‑off ball valve. Body material: technopolymer IXEF®. Shut‑off ball valve, swiveling fitting and plugs material: CW617N brass. Sealing elements material: Peroxide EPDM. Temperature: 0 ÷ 90 °C. Max pressure: 3 bars. Kv with swiveling insert in position A = 5, 6 m3/h angle configuration; Kv with swiveling insert in position A1 = 6, 2 m3/h straight configuration; Kv with swiveling insert in position B = 5, 5 m3/h angle configuration; Kv with swiveling insert in position B1 =5, 7 m3/h straight configuration. Compatible with water or glycol solutions max 50%. Connections: 3/4”M x 3/4"F.

Gas‑fired high performance air heater with axial fan

Grille on Duct

Grille on Duct

Air Terminal Overflow Standard

Air Terminal Overflow Perforated

IVAR EQCP1 (Kv 2.50): Two‑way metering module for heating and cooling systems with DHW distribution lines and heat metering unit, equipped with template sockets instead of heat meters. Heat module consisting of CW617N brass monobloc with 2‑way piston zone valve with M30×1.5 mm connection, selector balancing valve, filter, pocket for heat meter delivery sensor, M10×1 pressure pocket for dynamic balancing valve. Shut‑off valves on the delivery and return to the boiler, on the delivery and return from the users, with slots for sealing. Drop pressure of the heat metering module Kv = 3.5. Placed on decomposable brackets and insulated with PP shell. Connections to the uprising columns and to the users of the G 3/4" heat module. Predisposition for heat meter with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Domestic block with G 3/4" connections that can be intercepted with ball valves with sealing slots. Predisposition for insertion of DHW volumetric meters with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Code 506587CB assembled in steel flush‑mounted metal box with standard painted door, dimensions H 510 ×L 510 ×D 130 mm. Code 506587CL assembled in steel flush‑mounted metal box with plasterable door, dimensions H 520 ×L 520 × D 130 mm. Max static operating pressure 10 bar; fluid temperature range 3÷90 ◦C. IVAR EQCP1 (Kv 3.00): Two‑way metering module for heating and cooling systems with DHW distribution lines and heat metering unit, equipped with template sockets instead of heat meters. Heat module consisting of CW617N brass monobloc with 2‑way piston zone valve with M30×1.5 mm connection, selector balancing valve, filter, pocket for heat meter delivery sensor, M10×1 pressure pocket for dynamic balancing valve. Shut‑off valves on the delivery and return to the boiler, on the delivery and return from the users, with slots for sealing. Drop pressure of the heat metering module Kv = 3.5. Placed on decomposable brackets and insulated with PP shell. Connections to the uprising columns and to the users of the G 3/4" heat module. Predisposition for heat meter with G 3/4" connections, length 130 mm and nominal flow rate Qnom = 2.5 m3/h. Domestic block with G 3/4" connections that can be intercepted with ball valves with sealing slots. Predisposition for insertion of DHW volumetric meters with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Code 506539CB assembled in steel flush‑mounted metal box with standard painted door, dimensions H 510 ×L 510 ×D 130 mm. Code 506539CL assembled in steel flush‑mounted metal box with plasterable door, dimensions H 520 ×L 520 × D 130 mm. Max static operating pressure 10 bar; fluid temperature range 3÷90 ◦C.

Ceiling Cassette, 1way‑ indoor unit, Individual flap control system, Compact design, Drain can be discharged upward by 600mm, Wireless remote control is an option

KXZRX Hi‑COP Heat Recovery VRF outdoor unit, Simultaneous heating and cooling operations of individual indoor units. Maximum energy efficiency: COP 4.76, Energy efficiency is maximised by employing Multi‑port DC Inverter compressor with concentrated electric winding, Total piping length up to 1000m and a maximum pipe run of 160m., Wide range of controls, central controls and BMS systems are available.

Wall mounted indoor unit, Stylishly designed with rounded contours that fit beautifully into any of Europe’s diverse interior settings, Flap control system, The air flow design that's proven to minimise resistance in a CFD analysis to achieve uniform air conditioning to the furthest corners of the room.

Ceiling Cassette, 4way Compact Indoor Unit, European design & Flat panel, Draft Prevention Panel as an option, Individual flap control system, Motion Sensor to improve the comfort and energy saving performance of the unit.

Simple Remote Controller, Considering specialized usage in hotel rooms, control buttons are limited only to minimum required functions, It can control up to 16 units individually, with pressing the AIR CON No. button., Auto restart allows starting the air conditioner automatically when power supply is restored after power failure or by turning on the power switch.

KXZR Heat Recovery VRF outdoor unit, Simultaneous heating and cooling operations of individual indoor units., Energy efficiency is maximised by employing Multi‑port DC Inverter compressor with concentrated electric winding, Total piping length up to 1000m and a maximum pipe run of 160m., Wide range of controls, central controls and BMS systems are available.

Cable junction box

Cable junction box

Cable junction box

6‑way ball valve G3/4

6‑way ball valve G3/4

Online double conversion UPS

Motorised smoke shutter Kamouflage 1V MP

Fire damper CR60‑1S‑L500 BFL(T) motorised

Fire damper CR120‑1S ONE T motorised

Fire damper CR120‑1S MFUS automatical unlocking (fusible link)

Fire damper CR120‑1S‑L500 BFL(T) motorised

Smoke shutter Kamouflage 1V P for ceilings

Fire damper CR60‑1S‑L500 ONE T motorised

Fire damper CR120‑1S BFL(T) motorised

Smoke shutter Avantage 2V with two shutters

Fire damper CR60‑1S‑L500 MFUS automatical unlocking (fusible link)

Fire damper CR60‑1S BFL(T) motorised

Fire damper CR60‑1S ONE T motorised

Fire damper CR120‑1S‑L500 ONE T motorised

Smoke shutter Kamouflage 1V

Motorised smoke shutter Avantage 1V ME

Smoke shutter Avantage 1V

Fire damper CR120‑1S‑L500 MFUS automatical unlocking (fusible link)

Fire damper CR60‑1S MFUS automatical unlocking (fusible link)

Smoke shutter Kamouflage 2V with two shutters

Hot water boiler with 220 l capacity

BC controller

BC controller

BC controller

BC controller

Hot water heat pump

Heat pump micro inverter, Outdoor unit, The Micro Inverter range offers products from 10 to 14 kW in cooling mode with high seasonal performance up to level A++, Wide range of operation down to, 20 C in heating and, 15 C in cooling, Component technology contributing to environmental protection with a range operating with R32 (‑W) and another with R410A, High efficiency performance and low vibration thanks to the use of DC twin rotary compressor technology, Equipped with a silent mode offering 6 dB less compared to standard operation, Design flexibility optimised with a compatible piping length up to 50 m and a precharged piping length of 30 m

Heat pump standard inverter, Outdoor unit, The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode, Component technology contributing to environmental protection with a range operating with R32 (‑W) and another with R410A, Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion, Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump standard inverter, Outdoor unit, Standard Inverter range offers high seasonal performance up to level A++ in cooling mode, Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion, Design flexibility optimised with a compatible piping length up to 30 m with a precharged piping length of 15 m

Heat pump standard inverter, Outdoor unit, The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode, Component technology contributing to environmental protection with a range operating with R32 (‑W), Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion, Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump micro inverter, Outdoor unit, Supplies 24 kW under standard cooling mode conditions and operates efficiently in extreme conditions down to, 15 C, Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping, Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation, Plastic cover is mounted over control boards in standard to facilitate the maintenance, Design flexibility optimised with a compatible piping length up to 70 m and a precharged piping length of 30 m

Electromotive rotary actuator “Aktor R ST L”, 24 V, steady control 0‑10 V, or 0‑24 V as 2 point control

Heat pump standard inverter, Outdoor unit, The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode, Component technology contributing to environmental protection with a range operating with R32 (‑W) and another with R410A, Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion, Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump micro inverter, Outdoor unit, Supplies 19 kW under standard cooling mode conditions and operates efficiently in extreme conditions down to, 15 C, Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping, Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation, Plastic cover is mounted over control boards in standard to facilitate the maintenance, Design flexibility optimised with a compatible piping length up to 70 m and a precharged piping length of 30 m

Heat pump hyper inverter, Outdoor unit, Leading powerful heating capacity in the industry thanks to expansion valve control and twin rotary compressor technology, High efficiency in both cooling and heating by achieving energy labels up to level A++, Wide range of operation down to, 20 C in heating and, 15 C in cooling, Advanced technology contributing to environmental protection with a range operating with R32 (‑W1) and another with R410A (S), Design flexibility optimised with a compatible piping length up to 50 m and a precharged piping length of 30 m

Green Case Fire Detector

Dry extinguisher accessories, 2 1/2'' Valve

Water refiller in heating and chilled water (cooling) installations

The PRxMIOO is solely the perforated face from the PTxMI, and suitable for overflow.

The RRBD is the return version of, and is the same as the RTBD in appearance.

The RRBM and RRTB are the return versions of, and are the same as the RTBM and RTBT in appearance.

The RTBD is a flower‑shaped swirl diffuser, type: surface‑mounted. The swirl technology creates an extremely stable supply‑air pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room The smaller versions of the RTBD can be supplied as a poured concrete diffuser. Most important features:, Suitable for heat‑pump systems (VRV/ VRF) with extremely low supply‑air temperatures, Suitable for low rooms, Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

The RTFO is a conical swirl diffuser, type: surface‑mounted, which gives the diffuser a more open appearance. The diffuser is easy to fit by means of one central screw in the separately supplied plenum. The same diffuser is used for supply and return. Most important features:, Simple and quick assembly, Highly inductive, Suitable for heat‑pump systems (VRV/ VRF) with extremely low supply‑air temperatures A clamp ring can be supplied as an accessory that enables you to fit the diffuser quickly and easily, without any tools, into a flat ceiling plate. Swirl diffusers are extremely suitable for variable volume systems.

The RTBC is a surface‑mounted diffuser in round shape. The swirl technology creates an extremely stable inflow pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room Most important features:, Suitable for heat‑pump systems (VRV/ VRF) with extremely low supply‑air temperatures, Suitable for low rooms, Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

This is the same diffuser as the RTFO Supply, but has been made suitable for Revit return systems

The RTLD is a louvre‑faced diffuser with a pure radial spread pattern. The diffuser is easy to adjust from a horizontal to a more vertical spread pattern. Most important features:, Up to extremely large air volumes, Can also be fitted free‑hanging, Adjustable interior The diffuser can also be fitted in walls.

The PRxD is the return version of, and is the same as the PTxD in appearance.

The PTxD is suitable for large air volumes with large temperature differences in respect of the room The diffuser contains air‑direction elements that enable you to modify the supply‑air direction afterwards. Most important features:, Highly inductive, High number of air changes achievable, Pure radial spread pattern This diffuser series is also suitable for Baopt control systems.

The PTxMI is considered to be the basic diffuser for modular ceilings. The diffuser is applied frequently by architects when they design buildings. The diffuser is fully perforated, which creates a beautiful aesthetic fit. Most important features:, Highly inductive, High number of air changes achievable, Pure radial spread pattern This diffuser series is also suitable for Baopt control systems.

The RTFM is a conical swirl diffuser, type: t‑bar mounted. The diffuser is easy to fit by means of one central screw in the separately supplied plenum. The same diffuser is used for supply and return. Most important features:, Simple and quick assembly, Highly inductive, Suitable for heat‑pump systems (VRV/ VRF) with extremely low supply‑air temperatures Swirl diffusers are extremely suitable for variable volume systems.

The RRBC is the return version of, and is the same as the RTBC in appearance.

The RTBM and RTBT ares a flower‑shaped swirl diffusers, type: t‑bar mounted. The swirl technology creates an extremely stable inflow pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room. Most important features:, Suitable for heat‑pump systems (VRV/ VRF) with extremely low supply‑air temperatures, Suitable for low rooms, Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

This is the same diffuser as the RTFM Supply, but has been made suitable for Revit return systems

The PRxMI is the return version of, and is the same as the PTxMI in appearance.

Empty enclosure

Floorstanding gas condensing boiler

Floorstanding gas condensing boiler

2‑16‑GROUP COMPOSITE UNIT MODEL: MULTI‑UNIT CH

Balcony Pot 80 mm with 50 mm side inlet

Balcony Pot 80 mm with 90 ° bend in PVC with 80 mm spigot end

Balcony pot 50‑60 mm with 90 ° bend in PVC without 70 mm spigot end

Induction thrust fan

CO sensor, Gas Sensor

Induction ventilator

Heat pump boiler

Heat pump boiler

Gas fired boiler

Sprinkler concealed cup with fixation

TwinLine N 44 cabinet

Wall mounted indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Wall mounted indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Wall mounted indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Wall mounted indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Wall mounted indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Wall mounted indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Fire pump test meter mag‑flux T4