Rectangular swirl diffuser

Decentral unit for ventilation with heat recovery

Decentral unit for ventilation with heat recovery

Expansion pump dispenser primary vessel

Pump dispenser expansion auxiliary vessel

Compressor expansion automat primary vessel

Compressor expansion automat auxiliary vessel

Expansion vessel

Expansion vessel

Intermediate vessel

Expansion vessel

Expansion vessel

Expansion vessel

Expansion vessel

Intermediate vessel

Expansion vessel

Expansion vessel

Expansion vessel

Expansion vessel

Expansion vessel

Self-optimizing vacuum spray deaeration/make-up unit

Self-optimizing vacuum spray deaeration/make-up unit

Self-optimizing vacuum spray deaeration/make-up unit

Self-optimizing vacuum spray deaeration/make-up unit

Mechanical ventilation opening

Electrical accessories

Sensors

VAV-controlers and actuators

MasterLINE with corner adapter

Presence tech / DualLINE

Presence tech BasicLINE

Protective basket

MasterLINE

Surface-mounting box, Presence tech

MasterLINE with wall adapter

70 MasterLINE / 110 MasterLINE

90 ProfessionalLINE / 110 ProfessionalLINE

Ceiling/Corner adapter, MasterLINE

Presence tech BasicLINE mini

Presence tech BasicLINE Corridor

Surface-mounting box, Presence tech BasicLINE

MasterLINE with ceiling adapter

BasicLINE

Flow manifold with flow meter/adjuster FLUXER (0-5 l/min) and EUROK connections. Manifolds can be used as supply manifolds only. The body is made of brass CW617N. Nickel-plated outer finished or yellow outer finished. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 90°C. Maximum operating pressure: 10 bar.  Main connections: G 1"F or G 1"1/4F. Secondary connections: EUROK. Sizes available: from 1 to 13 ways.

Plain manifold with EUROK connections. Manifolds can be used as supply or return manifolds. The body is made of brass CW617N. Nickel-plated outer finished or yellow outer finished. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 120°C. Maximum operating pressure: 10 bar. Main connections: G 3/4"F or G 1"F or G 1"1/4F. Secondary connections: EUROK. Sizes available: from 2 to 13 ways.

Kit made of flow manifold with double micrometric adjustment lockshields, return manifold with manually operated isolation valves, brackets and EUROK connections. The body is made of brass CW617N. Nickel-plated outer finished or yellow outer finished. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 120°C. Maximum operating pressure: 10 bar. Main connections: G 1"F or G 1"1/4F. Secondary connections: EUROK. Sizes available: from 2 to 13 ways.

Flow manifold with micrometric dually adjusted lockshields and EUROK connections. Manifolds can be used as supply manifolds only. The body is made of brass CW617N. Nickel-plated outer finished or yellow outer finished. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 120°C.Maximum operating pressure: 10 bar.  Main connections: G 1"F or G 1"1/4F. Secondary connections: EUROK. Sizes available: from 1 to 13 ways.

Return manifold with manually operated isolation valves and EUROK connections. Manifolds can be used as return manifolds only. The body is made of brass CW617N. Nickel-plated outer finished or yellow outer finished. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 120°C. Maximum operating pressure: 10 bar.  Main connections: G 1"F or G 1"1/4F. Secondary connections: EUROK. Sizes available: from 1 to 13 ways.

Kit made of flow manifold with flow meter/adjusters FLUXER (0-5 l/min), return manifold with manually operated isolation valves, brackets and EUROK connections. The body is made of brass CW617N. Nickel-plated outer finished or yellow outer finished. Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 90°C. Maximum operating pressure: 10 bar. Main connections: G 1"F or G 1"1/4F. Secondary connections: EUROK. Sizes available: from 2 to 13 ways.

Kit made of flow manifold with double micrometric adjustment lockshields, return manifold with manually operated isolation valves, brackets, terminals, filling/drainage valves, air vent valves and EUROK connections. The body is made of brass CW617N. Nickel-plated outer finished or yellow outer finished.  Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 120°C. Maximum operating pressure: 10 bar. Main connections: G 1"F or G 1"1/4F. Secondary connections: EUROK. Sizes available: from 2 to 13 ways.

Kit made of flow manifold with flow meters/adjusters FLUXER (0-5 l/min), return manifold with manually operated isolation valves, brackets, terminals, filling/drainage valves, air vent valves and EUROK connections. The body is made of brass CW617N. Nickel-plated outer finished or yellow outer finished.  Gaskets and O-rings: Peroxide EPDM. Maximum fluid temperature: 120°C. Maximum operating pressure: 10 bar.  Main connections: G 1"F or G 1"1/4F. Secondary connections: EUROK. Sizes available: from 2 to 13 ways.

Equimeter metering module with unit for heat only. Heat metering unit: Qn =1,5 m3/h (for modules with kv = 2,25); Qn =2,5 m3/h (for modules with kv = 2,75). MATERIALS Heat metering monoblock: CB753S brass. Shut-off valves: CW617N brass. Sealing elements: Peroxide EPDM. Cabinet: white painted galvanized steel sheet. Support: galvanized steel sheet. CONDITIONS OF USE Maximum static operating pressure: 10 bar. Maximum fluid temperature: 90 °C. CONNECTIONS G 3/4"M

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat recovery unit

Heat recovery unit

Heat recovery unit

Heat recovery unit

The NIBE VVM 310 is designed for combination with any NIBE air/water heat pump to create a highly-efficient, flexible climate system for your home

Inverter-controlled ground source heat pump with an integrated hot water tank

The NIBE VVM 500 is designed for combination with any NIBE air/water heat pump to create a highly-efficient, flexible climate system for your home

Inverter-controlled ground source heat pump with integrated passive cooling and an integrated hot water tank

The NIBE VVM 320 is designed for combination with any NIBE air/water heat pump to create a highly-efficient climate system for your home

Air handling Unit

The satellite module IvarSAT-H independently manages high-temperature heating (direct circuit) in centralized systems and instantaneous production of domestic hot water in each apartment. Optional equipment: “R” with recirculation circuit complete with pump, “1” with high-temperature domestic water outlet. Mode of installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover painted white 860-960×700×110-160 mm, “M” in wall hanging box made of aluminium painted white 722×600×150 mm. Optional accessories: heat meter, flow meter, electrothermal head, thermostatic head, axial motor.

Roof curb with round barrel for MDV 630

Gas-fired high performance air heater with axial fan

Gas-fired high performance air heater with axial fan

Gas-fired high performance air heater with axial fan

Gas-fired high performance air heater with axial fan

Butterfly Valve Wheel

Globe Valve

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Butterfly Valve Wheel

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Butterfly Valve Wheel

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Single bracket for EASY LOCK modular manifolds. Made of zinc plated steel. Two different sizes: DN 20 or DN 25.