Browse within the largest BIM library and enrich your project with manufacturer‑specific and generic BIM content! The powerful search engine allows you to find up‑to‑date graphic and parametric product information, ready to use in your BIM process. Simply load or insert 3D content directly into your Revit model or CAD drawing. Without having to leave your project environment. Free to download and use. You can download the app for free from [a href="https://store.mepcontent.com/en/product/details/2" target="_blank"]our store.

The free SANHA Product Line Placer App for Revit makes it easy to design piping systems with accurate and localized SANHA specific content.

With the Valsir Product Line Calculator for Revit it is very easy to draw Valsir supply and waste systems twice as fast with up‑to‑date and localized Valsir content. The calculations functionality for waste water systems is fully Revit integrated and EU compliant and reduces the chance of errors to a minimum with both design and calculation taking place in the App. You can download the app for free from [a href="https://www.mepcontent.com/en/apps/" target="_blank"]BIM Manufacturer Apps.

Brass dirt filter with magnet and MultiMode Swivel for heat pump systems.

Pre‑assembled multifunction bypass unit complete with pair of 3‑way valves, mesh strainer, fill/drain tap, three piezometric ports and PICV flow regulator.

Pre‑assembled multifunction bypass unit complete with pair of 3‑way valves, mesh strainer, fill/drain tap and piezometric port.

Wall lead‑in, use with Countersink cutter model 94980, in combination with Anti‑twist protection model 2132, gunmetal, galvanised steel, G‑thread, cuttable Model 2032.1

Wall plate for Prevista, for Prevista pre‑wall system, Prevista plug‑in seat screw fitting, silicon bronze, Rp‑thread, G‑thread, cuttable Note Only suitable for adapters with Prevista plug‑in seat! Model 8055.2

POLO‑RDS Evolution Seal element DN 150, 25‑65mm

POLO‑RDS Evolution Seal element DN 150, 70‑90mm

POLO‑RDS Evolution Seal element DN 100, 63mm

POLO‑RDS Evolution Seal element dummy DN 100, dummy

POLO‑RDS Evolution Seal element DN 150, 110mm

POLO‑RDS Evolution Seal element multiple passage DN 150, multiple passage 8‑35mm

POLO‑RDS Evolution Seal element DN 200, 160mm

POLO‑RDS Evolution Seal element dummy DN 150, dummy

POLO‑RDS Evolution Seal element DN 300, 250mm

POLO‑RDS Evolution Seal element DN 300, 160mm

POLO‑RDS Evolution Seal element DN 100, 52‑58mm

POLO‑RDS Evolution Seal element multiple passage DN 100, multiple passage 8‑18mm

POLO‑RDS Evolution Seal element DN 100, 13‑50mm

POLO‑RDS Evolution Seal element DN 200, 50‑125mm

POLO‑RDS Evolution Seal element DN 300, 200mm

POLO‑RDS Evolution Seal element dummy DN 200, dummy

POLO‑RDS Evolution Seal element dummy DN 300, dummy

Content for Trimble Nova is available. Please click here for more information.

Fully‑configurable and high‑efficiency air‑source reverse‑cycle rooftop unit

Fully‑configurable and high‑efficiency air‑source cooling only rooftop unit

Profipress G connection elbow 90° with SC‑Contur, suitable for base plate model 2624, 2624.1, gunmetal, press connection, Rp‑thread Equipment anti‑twist protection, fixing material, HNBR sealing element Model 2614.6

Profipress G Wall plate with SC‑Contur, gunmetal, press connection, Rp‑thread Components HNBR sealing element, fixing flange Model 2625.5

A smart shut‑off valve, it records water consumption, temperature and pressure in real time

Telescopic fitting push‑fit

Chiller, air source for outdoor installation with refrigerant type R134a

Chiller, air source for outdoor installation with refrigerant type R513A

Connection elbow 90°, gunmetal or silicon bronze, Rp‑thread Model 94477.0‑713

Sanpress Inox Crossover with SC‑Contur, non‑corroding steel, plug‑in end, press connection Components EPDM sealing element Model 2327

Sanpress Inox Wall plate with SC‑Contur, non‑corroding steel, press connection, Rp‑thread Components EPDM sealing element, fixing flange Model 2325.5

Profipress Crossover with SC‑Contur, copper, plug‑in end, press connection Components EPDM sealing element Model 2427

Profipress Crossover with SC‑Contur, copper, press connections Components EPDM sealing elements Model 2428

Sanpress Inox Wall plate T‑piece with SC‑Contur, non‑corroding steel, press connections, Rp‑threads Components EPDM sealing elements, fixing flange Model 2317.3

Sanpress Inox Double wall plate with SC‑Contur, non‑corroding steel, press connections, Rp‑thread Components EPDM sealing elements, fixing flange Model 2325.7

Sanpress Radiator connection piece with SC‑Contur, for connection to standard or valve radiators, gunmetal, press connections, G‑thread Components screw fittings, EPDM sealing elements Model 2273.1

Sanpress Wall lead‑in with SC‑Contur, silicon bronze, press connection, Rp‑thread, G‑thread, angled Components EPDM sealing element Model 2232.1

Sanpress Cross T‑piece with SC‑Contur, for pipe crossing while keeping required construction height, gunmetal, press connections, 2‑part Components insulating box L160xW160xH50 mm, EPDM sealing elements Model 2249.3

Sanpress Wall lead‑in with SC‑Contur, silicon bronze, press connection, Rp‑thread, G‑thread Components EPDM sealing element Model 2232.3

Sanpress Mounting unit with SC‑Contur, press connections, Rp‑threads Components EPDM sealing element, short gunmetal or silicon bronze elbow, galvanised steel (offset) mounting bracket Model 2222

Sanpress Wall plate T‑piece with SC‑Contur, silicon bronze, press connections, Rp‑thread Components EPDM sealing elements, fixing flange Model 2217.3

Sanpress Return pipe screw fitting with SC‑Contur, gunmetal, press connection, R‑thread, blockable Components EPDM sealing element Model 2272.1

Sanpress Wall plate with SC‑Contur, silicon bronze, press connection, Rp‑thread Components EPDM sealing element, cuttable connection elbow, fixing flange Model 2225

Sanpress Mounting unit with SC‑Contur, press connections, Rp‑threads Components EPDM sealing element, short gunmetal or silicon bronze elbow, galvanised steel (flat) mounting bracket Model 2222.2

Sanpress Return pipe screw fitting with SC‑Contur, gunmetal, press connection, R‑thread, blockable Components EPDM sealing element Model 2272.2

Sanpress Wall plate with SC‑Contur, silicon bronze, press connection, Rp‑thread Components EPDM sealing element, spacer, fixing flange Model 2225.6

Sanpress Double wall plate with SC‑Contur, silicon bronze, press connections, Rp‑thread Components EPDM sealing elements, fixing flange Model 2228.7

Sanpress Wall plate with SC‑Contur, silicon bronze, press connection, Rp‑thread Components EPDM sealing element, fixing flange Model 2225.5

Sanpress Mounting unit with SC‑Contur, press connections, Rp‑threads, long on one side Components EPDM sealing element, galvanised steel (flat) mounting bracket, long gunmetal or silicon bronze elbow (cuttable) Model 2221

Sanpress Screed manifold with SC‑Contur, for inaccessible area, piping crossing prevention, gunmetal, press connections Components insulating box L100xW160xH43 mm, EPDM sealing elements Model 2252

Sanpress Mounting unit with SC‑Contur, press connections, Rp‑threads, long on one side Components EPDM sealing element, long gunmetal or silicon bronze elbow (cuttable), galvanised steel (flat) mounting bracket Model 2221.1

Sanpress Cross piece with SC‑Contur, gunmetal, press connections Components EPDM sealing elements Model 2248

Sanpress Cross piece with SC‑Contur, for pipe crossing on one floor while keeping the direction of the piping, gunmetal or silicon bronze, press connections Components EPDM sealing elements Model 2244

Sanpress Cross piece 24° with SC‑Contur, for going over riser pipes, gunmetal, press connections Components EPDM sealing elements Model 2247

Sanpress Crossover, non‑corroding steel, plug‑in ends Model 2209.3

Sanpress Mounting unit with SC‑Contur, press connections, Rp‑threads Components EPDM sealing element, short gunmetal or silicon bronze elbow, galvanised steel (flat) mounting bracket Model 2222.05

Sanpress Mounting unit with SC‑Contur, press connections, Rp‑threads Components EPDM sealing element, short gunmetal or silicon bronze elbow, galvanised steel (offset) mounting bracket Model 2222.6EX

Heat meter set, for Fonterra radiant heating and cooling, heat meter G1/G¾ installation length 130/110 mm, horizontal Equipment ball valves in supply and return, direct connection for measuring sensor Ø 5.6 mm, M10 in the supply and return ball valve, fitting‑ and measuring piece G1, screw fitting, gaskets Model 1288

Pump, for Fonterra radiant heating and cooling, spare part for compact control station model 1252.1 Model 1254.9

Zone valve set straight‑through form, for Fonterra radiant heating and cooling, manifold DN25, suitable for actuator model 1249, 1249.1, brass Equipment zone valve with protective cap, spacer DN25 with gasket, ball valve for supply line Model 1286

Heat meter set, for Fonterra radiant heating and cooling, heat meter G1/G¾ installation length 130/110 mm, vertical Equipment ball valves in supply and return, direct connection for measuring sensor Ø 5.6 mm, M10 in the supply and return ball valve, fitting‑ and measuring piece G1, screw fitting, gaskets Model 1288.1

Pump, for Fonterra radiant heating and cooling, spare part for manifold control station model 1254.2, small surface control station model 1256 Model 1252.9

Ball valve set, for Fonterra radiant heating and cooling, manifold DN25, nickel‑plated brass, female thread, G‑thread, flat sealing Model 1041

Extension set flow rate gauge 0–5 l/min, for Fonterra radiant heating and cooling, suitable for manifold DN25 model 1010, stainless steel, euro cone, union nut G1, flat sealing Equipment flow rate gauge 0–5 l/min, nickel‑plated brass double nipple, gaskets Model 1010.2

Prestabo Crossover, non‑alloyed steel, galvanised, plug‑in ends Model 1109.3

Prestabo Cross piece with SC‑Contur, non‑alloyed steel, galvanised, press connections Components EPDM sealing elements Model 1148

Chiller, air source for outdoor installation with refrigerant R513A

A steel (microbubble) deaerator and dirt separator for standard flow rate (1.5 m/s) with a DN50, DN300 PN16 connection

A steel dirt separator for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel low loss header with (microbubble) deaerator and dirt separator with magnet with a DN50, DN300 PN16 flange connection

A steel low loss header with (microbubble) deaerator and dirt separator with a DN50, DN300 connection

A steel dirt separator with magnet for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator and dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator and dirt separator with magnet for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A demountable steel (microbubble) deaerator and dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator for standard flow rate (1.5 m/s) with a DN50, DN300 connection

A steel (microbubble) deaerator for high flow rate (3 m/s) with a DN50, DN300 PN16 connection

A steel dirt separator for high flow rate (3 m/s) with a DN50, DN300 connection

A brass dirt separator with a 22 mm, 2" horizontal connection

A brass dirt separator with magnet and a 22 mm, 2" universal connection

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 1 and 4 bar. I: insulated B: with break tank R: with direct refill

A brass low loss header with (microbubble) deaerator and dirt separator with a 1", 1½" connection and magnet

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 2.5 and 6 bar. I: insulated B: with break tank R: with direct refill

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 0, 5 and 2, 5 bar

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 5 and 10 bar. I: insulated R: with direct refill

Maintenance unit for SpiroExpand expansion vessels

Hydraulic deaerator and dirt separator

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 9 and 16 bar. I: insulated R: with direct refill

The Home range consists of 3 refill systems for domestic installations of different sizes. Once installed (including wall bracket), the system ensures a constant supply of refill water and consistent water quality in the heating system. The integrated resin cartridge contains the demineralizing resin, which changes colour to indicate that the cartridge needs to be replaced. The products can be sold with (Home+) or without (Home) a filling combination valve (backflow preventer, pressure reducer and pressure gauge).

A small brass dirt separator with magnet and a 22 mm, 1" universal connection.