EG/A32.2.1 KNX/EnOcean Gateway

LFO/A1.1 Außenlichtfühler f. HS/S 4.2.1

WES/A 3.1 Wettersensor, AP

FAD/A1.1 DCF‑Antenne für Funkschaltuhr

AE/A 2.1 Analogeingang, 2fach, AP

ST/K1.1 Elektromotorischer Stellantrieb

HS/S4.2.1 Schnittst. Außenlichtfühler

6136/xx ABB‑SmartTouch

8136/xx Busch‑ComfortTouch

LGS/A 1.2 Luftgütesensor mit RTR, AP

DLR/A4.8.1.1, DALI‑Lichtregler, 4f, AP

FAG/A1.1 GPS‑Antenne für Funkschaltuhr

TSA/Kx.2 Thermoelectric Valve Drive

Ventilation unit

Connector sets from Remeha

Heat Pump

Temperature Controller

Heat Pump

Manifold with 8 connections

Shut‑off and change‑over valves 2‑way and 3‑way

(Control) ball valve Actuators

Belimo ZoneTight™ (Room & Zone Solutions)

Control ball valves 2‑way and 3‑way

Energy‑Valve

Globe valves and actuators 2‑way and 3‑way

SuperCap actuators with safety functionality

Fire damper actuators

Butterfly valves & actuators

Non spring‑return actuators

Electronic pressure‑independent 6‑way characterized control valve

6‑way characterised control valve

Elektronische drukonafhankelijke regelkogelkraan

KHS venturi flow divider

KHS venturi flow divider

Generic Underfloorbox

IVARPRESS is an IVAR press fitting studied and tested to be used with B crimper profile. The geometry of the fitting, designed for ideal coupling between pipe and fitting ensuing pressing, and the windows on the bushing holder, to verify correct insertion of the pipe and two O‑rings in peroxide EPDM on each terminal, are all details which help to guarantee the usability and reliability of the product. The body is made of CW617N nickel‑finished brass on the outer surface and yellow for all other parts in contact with fluid in conformity with the latest standards‑regulations for drinking water plant. Available in a wide range of configurations and sizes.

MULTI•PRESS•LEAK•CUPHIN is the new press fitting designed to guarantee water leakage in case of failed pressing and to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The absence of sealing if not pressed is a function which is especially on demand on the market to avoid problems and damage in case of forgotten pressing: thanks to the system test, the installer can immediately identify leaks and repair them by correctly pressing the fitting. Available in a wide range of configurations and sizes. Fitting body made of Cuphin CW724R.

MULTI•PRESS•CUPHIN is an IVAR press fitting studied and tested to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The geometry of the fitting, designed for ideal coupling between pipe and fitting ensuing pressing, and the windows on the bushing holder, to verify correct insertion of the pipe and two O‑rings in peroxide EPDM on each terminal, are all details which help to guarantee the usability and reliability of the product. Available in a wide range of configurations and sizes. Fitting body made of Cuphin CW724R.

Junction box for tunnel WKE 54

WKE 2‑5 (SB)/WKE 200‑400

Cable junction box WKE‑LSA

Cable junction box WKE‑RK

MULTI•PRESS•LEAK is the new press fitting designed to guarantee water leakage in case of failed pressing and to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The absence of sealing if not pressed is a function which is especially on demand on the market to avoid problems and damage in case of forgotten pressing: thanks to the system test, the installer can immediately identify leaks and repair them by correctly pressing the fitting. Available in a wide range of configurations and sizes.

MULTI•PRESS is an IVAR press fitting studied and tested to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The geometry of the fitting, designed for ideal coupling between pipe and fitting ensuing pressing, and the windows on the bushing holder, to verify correct insertion of the pipe and two O‑rings in peroxide EPDM on each terminal, are all details which help to guarantee the usability and reliability of the product. Available in a wide range of configurations and sizes.

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Reflex V200 Voorschakelvat 10

Terminal block enclosure RK‑RKA‑ALR‑AKi‑R

Heat pump outdoor unit

Entlüftung

IS‑BOX is a box with a pair of pre‑installed 3+1 and 4+1 outlet sanitary manifolds, suitable for wall recessing even in bathrooms covered with tiles or valuable materials. The reduced size allows it to be installed in brick or plasterboard walls with a minimum thickness of 60 mm. The manifolds are compatible with drinking water and the inlets can be shut off by screw sealing valves and replaceable headworks. Available in two colours (white and chrome), also in the completely inspectable version.

IVAR E‑SAT DUAL is a double heat exchanger satellite module which allows on‑site production of DHW and hot water for the heating system, with only AFS connections and technical water supply/return. Thanks to the integrated electronics IVAR E‑SAT modulates the technical water flow to guarantee a low return temperature to the boiler. The double exchanger solution, completely separating the centralized system from the domestic one, guarantees easy maintenance of the single user system. IVAR ESAT DUAL can be equipped with differential pressure valves and shut‑off valves kit.

Cabinet gas for 1 to 5 meters

Gas box

Outside generic gas cabinet

A gas meter is a specialized flow meter, used to measure the volume of fuel gases such as natural gas and propane

Cabinet gas for 6 to 10 meters

Inside generic gas cabinet

Junction box Abox‑i SL

Junction box Abox M

Junction box Abox‑I M

Junction box Abox SL

Junction box Abox‑i

Junction box Abox

Expansion Vessel 14L

This manual describes how you can create a new pipe and add Imperial Diameters in Revit MEP. Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Thermostatic control unit

Water heater

Empty enclosure AK 14 L

Kleinverteiler AK 14

Kleinverteiler AK 14 Plus

Kleinverteiler AK 03

Heat recovery unit

Flex design roof outlet

Universal roof tile All Weather

Steckdosenkombination STV 504‑L

Steckdosenkombination 14‑1K

Steckdosenkombination STV 904‑ K

Steckdosenleergehäuse AKi 1‑2L

Kleinverteiler AKi 05

Steckdosenleergehäuse AKi 28‑2L

Pressure independent control valve

Distribution Board

Ceiling concealed ducted indoor unit Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

System M Compact Outdoor Unit

System M Compact Indoor Unit

Non Return Valve