IS-BOX is a box with a pair of pre-installed 3+1 and 4+1 outlet sanitary manifolds, suitable for wall recessing even in bathrooms covered with tiles or valuable materials. The reduced size allows it to be installed in brick or plasterboard walls with a minimum thickness of 60 mm. The manifolds are compatible with drinking water and the inlets can be shut off by screw sealing valves and replaceable headworks. Available in two colours (white and chrome), also in the completely inspectable version.

IVAR E-SAT DUAL is a double heat exchanger satellite module which allows on-site production of DHW and hot water for the heating system, with only AFS connections and technical water supply/return. Thanks to the integrated electronics IVAR E-SAT modulates the technical water flow to guarantee a low return temperature to the boiler. The double exchanger solution, completely separating the centralized system from the domestic one, guarantees easy maintenance of the single user system. IVAR ESAT DUAL can be equipped with differential pressure valves and shut-off valves kit.

Roth Thermaset Distributor

Robot Standard Pro stalen verdeler

Ring seal socket with cap

Families voor Legrand Cablofil draadgoten

Families voor Legrand DLP Wandgoten

87°30’ bend with front inlet with seal

Smart system for managing the heating system remotely via app. It allows remote control of all the zones in the house through time slots. Compatible with autonomous or centralized heating systems, at high or low temperature (e.g. radiators, radiant floor or ceiling, fan-coil). It can be used in public or private environment thanks to tamper controls. Installation of temperature sensors with no electrical connection. Temperature sensor with relay replaces the main chronothermostat and manages the switching on/off of the boiler (or zone valve with appropriate wiring). Operating system compatible with MyCubodomo App: Android 5.0 and iOS 8.0 onwards. Operating temperature range: -5 – 45 °C. Transmission frequency: 868,3 MHz. Signal range: 30 meters. Cube: power supply 5 V/1 A micro USB, Wi-Fi Standard FCC/CE/TELEC/KCC/SRRC/IC/NCC, protocollo Wi-Fi 802.11 b/g/n, frequency 2.4 GHz ~ 2.5 GHz (2400M ~ 2483.5M), dimensions (W x H x D) 100 x 100 x 100 mm. Temperature sensor (with or without relay): power supply 2 alkaline batteries AA (mod. LR6) 1.5 V, hysteresis on the set point temperature On-Off +/- 0,1°C, average battery life 3 years, dimensions (W x H x D) 87 x 87 x 28 mm. Actuator: power supply 3 alkaline batteries AA (mod. LR6) 1.5 V, connection M30x1.5, maximum closing distance 12 mm, insulation CLASS III, average battery life 3 years. Dimensions (W x H x D) 92 x 48 x 66 mm. Wiring Center: control unit equipped with radio module, power supply 230V 50/60 Hz, fuses F3 15A/250V, output switching relay max 2A/230V AC - 2A/30V DC, dimensions (W x H x D) 180 x 130 x 65 mm.

Bronze piston type spring assisted check valve

Standard Fan

TBW/U.1.1-CG Watchdog 180°

Standard Fan

Perforated Standard

Air Terminal Overflow Standard

Balancing valve for the hydraulic balancing of distribution lines in central heating and cooling systems with closed circuits. Flow determination by differential pressure measurement taking into account the preset values, e.g. with the OV-DMC3 measuring system. Installation in flow or return. In an angled version with continuously controllable, infinitely fine presetting using a non-rising handwheel. Presetting is reproducible, lockable and sealable as standard. All functional elements on the handwheel side. Equipped with two measuring, draining and filling valves as standard. Valve housing and parts in contact with the medium made of dezincification-resistant brass, EPDM or PTFE. Maintenance-free, double spindle seal. Female thread on both sides according to EN 10226

Heat pump standard inverter outdoor unit

FTC5 pre-plumbed Standard cylinders for Ecodan

Families GLO 4 Ladderbanen van Legrand

Families voor het Legrand P31 Kabelgootsysteem

FTC6 pre-plumbed standard cylinders for ecodan monobloc units

1-12 way - SLIM district heating manifold Grundfos-2 standard

FTC6 pre-plumbed standard cylinders for ecodan monobloc units

FTC6 versatile standard cylinders for ecodan monobloc units

FTC6 pre-plumbed standard cylinders for ecodan monobloc units

Ceiling cassette -1way Compact - Indoor Unit - Compact design for Comfortable effective cooling for small rooms. - Ultra slim design at just 250mm above the ceiling. - Standard built- in drain pump. - Fit in to Standard 600 x 600 ceiling panel.

The patented “ TURBO PRESS GAS”, our multilayer pipe and fitting system, offers the most extensive guarantee for the house gas installations. The system makes very easy and reliable the laying of new installations and very practical in revising the existing ones. Pipes and fittings are assembled by means of electro-mechanical pressing tools with TH profile, that permanently deform the stainless steel AISI 304 bushing and ensuring the perfect union and seal of the two parts.

The patented “ TURBO PRESS GAS”, our multilayer pipe and fitting system, offers the most extensive guarantee for the house gas installations. The system makes very easy and reliable the laying of new installations and very practical in revising the existing ones. Pipes and fittings are assembled by means of electro-mechanical pressing tools with TH profile, that permanently deform the stainless steel AISI 304 bushing and ensuring the perfect union and seal of the two parts.

Heat pump standard inverter - Outdoor unit - The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode - Component technology contributing to environmental protection with a range operating with R32 (-W) and another with R410A - Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion - Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump micro inverter - Outdoor unit - High cooling capacity under standard conditions and operates efficiently in extreme conditions down to -15 C - Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping - Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation - Plastic cover is mounted over control boards in standard to facilitate the maintenance - Precharged piping length of 30 m

Heat pump standard inverter - Outdoor unit - Standard Inverter range offers high seasonal performance up to level A++ in cooling mode - Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion - Design flexibility optimised with a compatible piping length up to 30 m with a precharged piping length of 15 m

Heat pump standard inverter - Outdoor unit - The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode - Component technology contributing to environmental protection with a range operating with R32 (-W) - Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion - Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

Heat pump standard inverter - Outdoor unit 1.The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode 2. Component technology contributing to environmental protection with a range operating with R32 (-W) 3.Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion 4.Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

IVAR RTV: thermostatic valve for controlling the water temperature in the recirculation branches. Balancing thermostatic insert with fixed point adjustment settable with graduated knob equipped with locking mechanism. Version A with only recirculation branch balancing. Version B with thermostatic control for thermal disinfection cycle. Version C with electronic thermal disinfection cycle. Connections: 1/2" F or 3/4" F. Adjustment range 35-60 °C. ΔP maximum at the ends of the valve 1 bar. Main material: brass CW617N. Adjustment knob: ABS. O-ring seal: peroxide EPDM.

Heat pump micro inverter - Outdoor unit - Supplies 19 kW under standard cooling mode conditions and operates efficiently in extreme conditions down to -15 C - Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping - Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation - Plastic cover is mounted over control boards in standard to facilitate the maintenance - Design flexibility optimised with a compatible piping length up to 70 m and a precharged piping length of 30 m

KXZE1 (Standard)- Heat Pump VRF outdoor unit Standard module VRF, 28 kW to 168 kW in cooling - High level of design flexibility, - High efficiency as well as enhanced operational functions: - Variable Temperature and capacity control (VTCC) - Peak cut control which can manage system energy control - Improved Scroll Compressor: the combination of the new multi discharge compressor port and the new concentrated - Wide Range of Operation: -20ºC in heating and up tp 46ºC in cooling. - Connect up to 80 indoor units for large models, with 130% by capacity - Wide range of controls, central controls and BMS systems are available.

Heat pump standard inverter - Outdoor unit - The Standard Inverter range offers high seasonal performance up to level A++ in cooling mode - Component technology contributing to environmental protection with a range operating with R32 (-W) and another with R410A - Heat exchanger fins treated with a specific coating offering a high level of protection against corrosion - Design flexibility optimised with a compatible piping length up to 30 m and a precharged piping length of 15 m

VRF ducted high static pressure - Indoor unit (R32) - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 200 Pa - Installation flexibility as thin design with 280mm height - Standard built- in drain pump - Transparent access hole to drain pan to check the drain pan without removing drain pan - Reduced energy consumption by applying DC fan motor

Heat pump micro inverter - Outdoor unit - Supplies 24 kW under standard cooling mode conditions and operates efficiently in extreme conditions down to -15 C - Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping - Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation - Plastic cover is mounted over control boards in standard to facilitate the maintenance - Design flexibility optimised with a compatible piping length up to 70 m and a precharged piping length of 30 m

KX6 (Standard)- Heat Pump VRF outdoor unit Standard single module VRF, 61.5 to 68.0kW in cooling - The KX6 heat pump 2-pipe systems offer high performance VRF for applications that require either cooling only or heating only, ideal for open plan areas. - KX6 employs DC inverter compressors ONLY. - Connect up to 49 indoor units/up to 160% capacity. - High efficiency with COP (in cooling) up to 3.4. - Industry leading total piping length up to 1000m and a maximum pipe run of 160m. - Wide range of controls, central controls and BMS systems are available.

VRF Standard Heat pump - Outdoor unit (R410A) - Standard VRF module (FDC-KXZE2) with a cooling range from 28 kW to 168 kW - Hi COP VRF module (FDC-KXZXE2) with a cooling range from 56 kW to 112 kW - Design flexibility thanks to fan external static pressure of 85 Pa - Wide range of operation down to -20ºC in heating and up to +46ºC in cooling - Connected capacity up to 200% and large number of connected indoor units (up to 80 for large sizes) - Wide range of controls, central controls and BMS systems are available

Ceiling Cassette 4way compact - Indoor Unit - Compact design with flat panels that perfectly fits into standard ceiling (600 x 600) - Individual Flap Control System: four directions of air flow can be controlled individually - Flap Control System: individual flaps can be set at different angles - Drain can be discharged up to 600mm from the ceiling surface and allows high degree of freedom

VRF ducted low/middle static pressure - Indoor unit (R32) - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 100 Pa - Installation flexibility as thin design with 280mm height - Standard built- in drain pump - Transparent access hole to drain pan to check the drain pan without removing drain pan - Reduced energy consumption by applying DC fan motor

Duct Connected-Low Static Pressure(thin) - Indoor Unit - Compact ducted unit with slim design (200mm height & 500mm Depth). - Interchangeable return air inlet (bottom or front) (*) with optional part - Low sound level: the low sound level can ensure comfortable stay and rest in hotels - Standard built- in drain pump,

Wall mounted Standard Series - Indoor Unit - Elegant design that fits into any kind of interior decoration - Long reach airflow is achieved by using Jet Air technology (same technology as blade shape of jet engine) - Flap control system: flap can be set to wide angle position to provide a comfortable air flow - Cleaning and maintenance are easier than ever thanks to the removable cover - Two available ranges compatible with R32 (-W) or R410 (-S) and single / multi systems

Duct Connected-High static pressure - Indoor Unit - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 200 Pa. - Installation flexibility as thin design with 280mm height. - Standard built- in drain pump, - Transparent access hole to drain pan to check the drain pan without removing drain pan. - Reduced energy consumption by applying DC fan motor. - Reduction of sound pressure level down to 25dBA.

VRF ducted thin low static pressure - Indoor unit (R32) - Compact ducted unit with slim design (200mm height & 500mm depth) - Interchangeable return air inlet (bottom or front) with optional part - Low sound level ensuring a comfortable stay and rest in hotels - Standard built- in drain pump

Duct Connected-Low/Middle Static Pressure - Indoor Unit - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 100 Pa. - Installation flexibility as thin design with 280mm height. - Standard built- in drain pump, - Transparent access hole to drain pan to check the drain pan without removing drain pan. - Reduced energy consumption by applying DC fan motor. - Reduction of sound pressure level down to 25dBA.