Pichler Fire protection - smoke extraction - Fire dampers

Green Case Fire Detector

Collarwings fire stop collar EI 240

Pichler Fire protection - smoke extraction - Accessories

Brandmanchet

Dry extinguisher accessories - 2 1/2'' Valve

VariGrip Basic haspelkasten geschikt voor brandslanghaspel met handbediende afsluiter. Inclusief zwenkbare montageset. Met diverse opties voor haspel, statief en frame.

Haspel, 180 graden zwenkbaar. Inclusief montageset.

Haspelwagen uitgevoerd met een brandslanghaspel, alsmede een toevoerhaspel die aan de waterleiding kan worden gekoppeld.

Manual Fire Detector

Haspel, muurmontage. Inclusief montageset.

VariGrip Basic haspelkasten geschikt voor brandslanghaspel met handbediende afsluiter. Exclusief vaste montageset. Met diverse opties voor haspel, statief en frame.

Milieuvriendelijke schuimblusser

Haspelkast geschikt voor schuimblusser en brandslanghaspel. Met diverse opties voor haspel, schuimblusser, statief en frame

Haspel, 180 graden zwenkbaar. Inclusief montageset.

Gevelkast voor droge blusleiding

VariGrip Basic haspelkasten geschikt voor brandslanghaspel met handbediende afsluiter. Met diverse opties voor haspel, statief en frame.

Manual Fire Detector

Fire pump test meter Turbo-Lux 2

Fire pump test meter mag-flux T4

Fire damper CRE60 ONE T motorised

Fire damper CRE60 BFN(T) motorised

Rechthoekige brandklep FK-90

Fire damper CU-LT MMAG upgradeable (automatical and/or with magnet and/or motorised)

Ronde brandklep FR-90

Fire damper CR2 MANO upgradeable (automatical and/or with magnet and/or motorised)

Fire damper CR60 MMAG upgradeable (automatical and/or with magnet and/or motorised)

[FM, LPCB and VdS approved] Fire pump test meter Turbo-Lux 3

Fire damper CR120 MMAG upgradeable (automatical and/or with magnet and/or motorised)

Fire damper CU2 MANO upgradeable (automatical and/or with magnet and/or motorised)

IVAR FCU-Kit: Pre-assembled brass multi-function bypass unit for fan-coil systems, chilled beams, heaters and other constant flow rate conditioning systems. Can be used for both heating and cooling. Consisting of: a pair of three-way valves for setting 5 different operating modes, a mesh filter, two loading/unloading taps, a Venturi orifice with a pair of piezometric sockets and a PICV flow regulator. Permissible differential pressure ranges and flow control range (for PICV): with PICC 03 cartridge (code 590123) 16- 200 kPa, 37-575 l/h; with PICC 03 cartridge (code 590124) 30-400 kPa, 64-1110 l/h. Mesh filter (500 μm) in stainless steel AISI 304. Connections to the primary circuit (with unions): 1/2 "F (DN 15) - 3/4 "F (DN 20). Connections to the secondary circuit: 1/2 "F (DN 15) - 3/4 "F (DN 20). Maximum operating pressure: 10 bar. Maximum operating temperature: 120 °C. Available with insulation shell in grey ARPRO 5135 FR with conductivity 0.037 W/mK, density 50 kg/m3, reaction to fire class HF-1 according to UL-94 standard.

Firenze trap with access

Firenze trap with access

Gas-fired high performance air heater with axial fan

Gas-fired high performance air heater with axial fan

Firelock alarm check valve

Gas-fired high performance air heater with axial fan

Gas-fired high performance air heater with axial fan

FireLock® Zone Controle Module

FireLock® Zone Controle Module

Gas-fired high performance air heater with axial fan

The Caleffi TankMixer™ is a perfect mixing valve solution to maximize the capacity of modern high efficiency water heaters and minimize installation time. It comes packaged in a kit with everything needed for fast installation including union fittings and industry-exclusive press connections The TankMixer™520_AX series kit combines a three-way thermostatic mixing valve with a cold water cross and flexible pipe for easy installation directly on a typical gas-fired w ater h eater a nd o ther water heaters that now comply with the National Appliance Energy Conservation Act (NAECA). The TankMixer™ maintains the desired output temperature of the mixed water supplied at a constant set value compensating for both temperature and pressure fluctuations o f t he incoming hot and cold water. The mixing valve hot inlet port closes tight to prevent temperature creep in recirculation applications. Also available as body only, for a wide variety of separately-sourced end connections, the angle style body design offers improved fluid dynamics f or better performance and reduces installation labor and materials, eliminating a piping elbow in typical installations. The valve ICC-ES certified to ASSE 1017 and CSA B125.3. It complies with codes IPC, IRC, NPC and UPC for use in accordance with the US and Canadian plumbing codes, and standard NSF/ANSI 372, low lead, as certified by ICC-ES.