Cable shafts

Single‑flow units

Double‑flow units

Nozzles and diffusers

Fire

Fans and extraction boxes

Flat roof drainage

System overlapping components

GM‑X composite drainage pipes

GM‑X drainage pipes

Parking garage drainage

Balcony/terrace drainage

Bathroom drainage

BlauPlast

Wall plate elbow 90° FM

Extension wall plate elbow 90° FF

Extension wall plate elbow 90° MF

Wall plate elbow 90° FF

Wall plate elbow 90° MF

Wall plate elbow 90° with female thread

Corner tee with wall flange

Wall plate elbow 90° with female thread

Wall plate elbow 90° with female thread

Wall plate elbow 90° with female thread

Extension wall plate elbow 90° FF

Wall plate elbow 90° FF

Corner tee with wall flange

Wall plate elbow 90° MF

Corner tee with wall flange

System overlapping components

Standard galvanized

Galvanized with seal

Standard aluminum

Double‑walled ventilation system

Air diffusers

Boilers

Hot water preparation

Ventilation and air treatment

Double bend radiator 300mm copper pipe connected end

Made of CW 617N brass fittings, TURBO PRESS, with integrated hose tail and two ageing‑resistant and leak proof EPDM rings, they withstand high pressure and high temperature ensuring the hydraulic tightness. the design of the O‑ring LBP (Leak before press) allows to identify a possible leakage of the fluid, during the testingphase of the installation, in case the fittings was not pressed. The TURBO PRESS fittings are suitable for tooling with TH, B, U e H, clamp’s profile till size 32, while for larger sizes they are suitable with TH jaws.

The patented “ TURBO PRESS GAS”, our multilayer pipe and fitting system, offers the most extensive guarantee for the house gas installations. The system makes very easy and reliable the laying of new installations and very practical in revising the existing ones. Pipes and fittings are assembled by means of electro‑mechanical pressing tools with TH profile, that permanently deform the stainless steel AISI 304 bushing and ensuring the perfect union and seal of the two parts.

Made of CW 617N brass fittings, TURBO PRESS, with integrated hose tail and two ageing‑resistant and leak proof EPDM rings, they withstand high pressure and high temperature ensuring the hydraulic tightness. the design of the O‑ring LBP (Leak before press) allows to identify a possible leakage of the fluid, during the testingphase of the installation, in case the fittings was not pressed. The TURBO PRESS fittings are suitable for tooling with TH, B, U e H, clamp’s profile till size 32, while for larger sizes they are suitable with TH jaws.

The patented “ TURBO PRESS GAS”, our multilayer pipe and fitting system, offers the most extensive guarantee for the house gas installations. The system makes very easy and reliable the laying of new installations and very practical in revising the existing ones. Pipes and fittings are assembled by means of electro‑mechanical pressing tools with TH profile, that permanently deform the stainless steel AISI 304 bushing and ensuring the perfect union and seal of the two parts.

Wingback elbow gas

Elbow fitting 15° hot water

Elbow fitting 15° cold water

Terminal fitting cold water

Wingback elbow hot water

Terminal U fitting hot water

Wingback elbow hot water

Terminal U fitting cold water

Wingback elbow hot water

Wingback elbow cold water

Terminal fitting hot water

Wingback elbow cold water

Wingback elbow cold water

Low wingback elbow cold water

Low wingback elbow hot water

Ventilation components

Een muurplaat vormt de overgang tussen de leiding en een kraan die aan de wand of in de muur wordt bevestigd. De hoek tussen de connectors is aanpasbaar in de Revit Family.

Een muurplaat vormt de overgang tussen de leiding en een kraan die aan de wand of in de muur wordt bevestigd.

Een muurplaat vormt de overgang tussen de leiding en een kraan die aan de wand of in de muur wordt bevestigd. In de family is de hoek tussen de aansluitingen instelbaar.

Een muurplaat vormt de overgang tussen de leiding en een kraan die aan de wand of in de muur wordt bevestigd.

NiroSan wall plate

SANHA 3fit‑Press wall plate

SANHA 3fit‑Press wall plate

SANHA Press wall plate

NiroSan wall plate

SANHA Press wall plate

PURAPRESS Installation set

A wall plate, which is attached to the wall or placed in the wall, forms the transition between the pipe and a tap.

Een muurplaat vormt de overgang tussen de leiding en een kraan die aan de wand of in de muur wordt bevestigd. De family ondersteunt de types 120 en 150 mm.

VSH XPress Stainless Gas fittings

VSH XPress Stainless fittings

VSH XPress Copper Gas fittings

VSH XPress Copper fittings

Alnor, Rectangular ventilation ducts and fittings

VSH XPress Carbon fittings

Aereco, Ventilation units

VSH SudoPress Stainless fittings

DEG ceiling modules

Convector accessories

Ascotherm Eco underfloor convectors

VSH SudoPress Copper fittings

Carbon fittings

Valves for VSH XPress

Pipes

Ventilation units with heat recovery

Ventilation system with heat recovery through exhaust air utilization

Demand‑controlled exhaust elements

Decentralized ventilation systems with heat recovery

System overlapping components green and blue

VSH SudoPress Copper Gas fittings

Water treatment for housing

Water treatment for industry

Fire protection