EG/A32.2.1 KNX/EnOcean Gateway

LFO/A1.1 Outside Light Sensor

WES/A 3.1 Weather Sensor, SM

FAD/A1.1 DCF Antenna for Radio Time Switch

AE/A 2.1 Analogue Input, 2fold, SM

ST/K1.1 Electromotor Valve Drive

HS/S4.2.1 Outside Light Sensor Interface

6136/xx ABB‑SmartTouch

8136/xx Busch‑ComfortTouch

LGS/A1.2 Air Quality Sensor with RTC, SM

DLR/A4.8.1.1 DALI Light Controller, 4f, SM

FAG/A1.1 GPS Antenna for Radio Time Switch

TSA/Kx.2 Thermoelectric Valve Drive

Ventilation unit

Connector sets from Remeha

Heat Pump

Temperature Controller

Heat Pump

Manifold with 8 connections

Open/dicht‑ en omschakelkogelkraan 2‑weg en 3‑weg

(Regel) Kogelkraanaandrijvingen

Belimo ZoneTight™ (Ruimte‑ en zoneoplossingen)

Regelkogelkraan 2‑weg en 3‑weg

Energy‑Valve

Regelafsluiters en aandrijvingen 2‑weg en 3‑weg

Aandrijvingen met veerteruggang

Brandklepaandrijvingen

Vlinderkleppen en aandrijvingen

Aandrijvingen zonder veerteruggang

Elektronische drukonafhankelijke 6‑weg regelkogelkraan

6‑weg Regelkogelkraan

Elektronische drukonafhankelijke regelkogelkraan

KHS venturi flow divider

KHS venturi flow divider

Generic Underfloorbox

IVARPRESS is an IVAR press fitting studied and tested to be used with B crimper profile. The geometry of the fitting, designed for ideal coupling between pipe and fitting ensuing pressing, and the windows on the bushing holder, to verify correct insertion of the pipe and two O‑rings in peroxide EPDM on each terminal, are all details which help to guarantee the usability and reliability of the product. The body is made of CW617N nickel‑finished brass on the outer surface and yellow for all other parts in contact with fluid in conformity with the latest standards‑regulations for drinking water plant. Available in a wide range of configurations and sizes.

MULTI•PRESS•LEAK•CUPHIN is the new press fitting designed to guarantee water leakage in case of failed pressing and to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The absence of sealing if not pressed is a function which is especially on demand on the market to avoid problems and damage in case of forgotten pressing: thanks to the system test, the installer can immediately identify leaks and repair them by correctly pressing the fitting. Available in a wide range of configurations and sizes. Fitting body made of Cuphin CW724R.

MULTI•PRESS•CUPHIN is an IVAR press fitting studied and tested to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The geometry of the fitting, designed for ideal coupling between pipe and fitting ensuing pressing, and the windows on the bushing holder, to verify correct insertion of the pipe and two O‑rings in peroxide EPDM on each terminal, are all details which help to guarantee the usability and reliability of the product. Available in a wide range of configurations and sizes. Fitting body made of Cuphin CW724R.

Verbindingsdoos voor toepassing in tunnels WKE 54

Kabelaftakdoos WKE 2, 3 x 10²

Kabelaftakdoos WKE 405 LSA

Kabelaftakdoos WKE 202 RK

MULTI•PRESS•LEAK is the new press fitting designed to guarantee water leakage in case of failed pressing and to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The absence of sealing if not pressed is a function which is especially on demand on the market to avoid problems and damage in case of forgotten pressing: thanks to the system test, the installer can immediately identify leaks and repair them by correctly pressing the fitting. Available in a wide range of configurations and sizes.

MULTI•PRESS is an IVAR press fitting studied and tested to be used indifferently with 7 different crimper profiles (BE, B, TH, R, H, F, U). The geometry of the fitting, designed for ideal coupling between pipe and fitting ensuing pressing, and the windows on the bushing holder, to verify correct insertion of the pipe and two O‑rings in peroxide EPDM on each terminal, are all details which help to guarantee the usability and reliability of the product. Available in a wide range of configurations and sizes.

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Grille on Duct

Reflex V200 Voorschakelvat 10

Rijenklemmenbehuizing AKi‑R 4/34

Heat pump outdoor unit

Ontluchting

IS‑BOX is a box with a pair of pre‑installed 3+1 and 4+1 outlet sanitary manifolds, suitable for wall recessing even in bathrooms covered with tiles or valuable materials. The reduced size allows it to be installed in brick or plasterboard walls with a minimum thickness of 60 mm. The manifolds are compatible with drinking water and the inlets can be shut off by screw sealing valves and replaceable headworks. Available in two colours (white and chrome), also in the completely inspectable version.

IVAR E‑SAT DUAL is a double heat exchanger satellite module which allows on‑site production of DHW and hot water for the heating system, with only AFS connections and technical water supply/return. Thanks to the integrated electronics IVAR E‑SAT modulates the technical water flow to guarantee a low return temperature to the boiler. The double exchanger solution, completely separating the centralized system from the domestic one, guarantees easy maintenance of the single user system. IVAR ESAT DUAL can be equipped with differential pressure valves and shut‑off valves kit.

Cabinet gas for 1 to 5 meters

Gas box

Outside generic gas cabinet

A gas meter is a specialized flow meter, used to measure the volume of fuel gases such as natural gas and propane

Cabinet gas for 6 to 10 meters

Inside generic gas cabinet

Verbindingsdoos Abox‑i SL‑2, 5/4²

Verbindingsdoos Abox m 025 AB SB‑L

Verbindingsdoos Abox‑i m 025 AB‑2.5²

Verbindingsdoos Abox SL‑2.5/4²

Verbindingsdoos Abox‑i 025 AB‑2.5²

Verbindingsdoos Abox 040 AB‑4 2

Expansion Vessel 14L

This manual describes how you can create a new pipe and add Imperial Diameters in Revit MEP. Plaats direct in Revit en AutoCAD met de gratis [a href="https://store.mepcontent.com/nl/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

Thermostatic control unit

Water heater

Lege behuizing AK 14 L‑g

Modulaire verdeler AK 14

Modulaire verdeler AK 14 Plus

Modulaire verdeler 03

Heat recovery unit

Flex design roof outlet

Universal roof tile All Weather

contactdoos combinatie STV 504‑L

contactdoos combinatie AKi 14‑1K

contactdoos combinatie STV 904‑ K

lege behuizing voor contactdozen AKi 1‑2L

Modulaire verdeler AKi 05

lege behuizing voor contactdozen AKi 28‑2L

Pressure independent control valve

Distribution Board

Binnenunit kanaal incl condenspomp Plaats direct in Revit en AutoCAD met de gratis [a href="https://store.mepcontent.com/nl/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer App

System M Compact Outdoor Unit

System M Compact Indoor Unit

Non Return Valve