Therminon is a leading company in the development and manufacturing of systems and manifolds of underfloor heating and cooling. More than 20 Revit families for manifolds are available on MEPcontent and can be downloaded for free!
The composite OEM manifold is available in different versions. Thanks to the insulating air chambers around the hydraulic passage there is no condensation during cooling. In heating mode the air chambers make sure that the heat loss is reduced to a minimum. The composite OEM manifold can be supplied with a pump set in case of a high-temperature system or without for heat pump installations.
The composite manifold is used to distribute the medium in installations for underfloor heating and cooling. This series of manifolds is produced out of a special composite to be installed in low-temperature systems. The composite manifold is available in two basic versions, with or without pump mixing unit. The version with pump is available as model LTV or district heating. The model LTV is fitted with a regulating valve to limit the amount of water from the return manifold. The manifold without pump (model Industry) is especially suitable for heat pump installations where the manifold itself doesn’t need an additional pump.
View the complete BIM library of Therminon manifolds!
Composite OEM Industry
The composite OEM manifold is available in different versions. Thanks to the insulating air chambers around the hydraulic passage there is no condensation during cooling. In heating mode the air chambers make sure that the heat loss is reduced to a minimum. The composite OEM manifold can be supplied with a pump set in case of a high-temperature system or without for heat pump installations.
Composite Nuon / Eneco
The composite manifold is used to distribute the medium in installations for underfloor heating and cooling. This series of manifolds is produced out of a special composite to be installed in low-temperature systems. The composite manifold is available in two basic versions, with or without pump mixing unit. The version with pump is available as model LTV or district heating. The model LTV is fitted with a regulating valve to limit the amount of water from the return manifold. The manifold without pump (model Industry) is especially suitable for heat pump installations where the manifold itself doesn’t need an additional pump.
View the complete BIM library of Therminon manifolds!