Wind speed sensor

Swirl diffuser

Swirl diffuser

2-12 group HKV-D distributor

Panel radiator

Flamcomat pump unit D G4 230V

Flamcomat pump unit D Starter G4 230V

Panel radiator

Dual discharge air cooler

Suction diffuser series 731-D with PN10/PN16 flange

REHAU Distribuidor 2-12 grupo P HKV-D

De-aeration

La unidad de ventilación doméstica descentralizada es compatible con: VAZ CP/2, VAZ CPC/2 o VAZ RC/2.

Refrigerador de condensación por aire para instalación al aire libre (con desobrecalentador / versión ultrasilenciosa)

Mounting unit with short gunmetal elbow, galvanised steel (offset) bracket

Bomba de calor inverter (8.3-12.2kW)

Caldera de condensación mural sólo calefacción compacta con conexión solar È possibile combinare l'apparecchio con i seguenti controller: sensoCOMFORT VRC 720(f), multiMATIC VRC 700(f), sensoDIRECT für ecoTEC exclusive, sensoHOME 380(f), eRELAX, calorMATIC 380 o 350.

Pump

Pump

Indoor unit for IT cooling application with upflow air delivery, Cooling capacity between 006-044 kW and refrigerant type R410A

Pump

Unidad interior Hydrobox

FTC5 hydrobox for ecodan split units

Indoor unit for IT cooling application with downflow air delivery, Cooling capacity between 006-044 kW and refrigerant type R410A

FTC5 hydrobox for ecodan split units

The TopControl Modular DUO is an automatic expansion and pressure-maintaining device. The unit contains 2 VFD pumps (2x 50%) and an electronically controlled overflow valve. A separate EP storage tank is required.

FTC5 hydrobox for ecodan split units

FTC5 packaged hydrobox for ecodan monobloc units

Indoor unit for IT cooling application with upflow air delivery, Cooling capacity between 006-044 kW and refrigerant type R32

Indoor unit for IT cooling application with downflow air delivery, Cooling capacity between 006-044 kW and refrigerant type R32

Pump

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

The MultiControl Modular DUO is an automatic expansion and pressure-maintaining device. The unit contains 2 pumps (2x 50%) and 1 overflow valve. A separate storage tank is required.

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Mixing and pump units for radiant systems UNIMIX/UNIMIC-C modular with: UM 01 – UM 01D/S: regulation unit UNIMIX with/without pump complete with 3-way mixing valve with headwork for thermostatic control, secondary by-pass with double micrometric adjustment and position memory, primary by-pass for recirculation, thermomanometer 0÷120 °C 0÷6 bar for mixed water, thermometers 0÷80 °C for delivery and return waters, probe pocket for mixed water, shut-off ball valves G 1” secondary side and automatic air vent valve. Available with or without straight or angled shut-off ball valves G 3/4”F on primary side. Available with or without 3-speed standard pump WILO3F centre distance 130 mm or variable-speed electronic pump WILO4F centre distance 130 mm. Body made of nickel-plated CB753S brass; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Max differential pressure at mixing valve ends 250 mbar. UMC 01 – UMC 01D/S: regulation unit UNIMIX-C with/without pump complete with 3-way mixing valve with headwork for thermostatic control, secondary by-pass with double micrometric adjustment and position memory, primary by-pass for recirculation, thermometer 0÷80 °C for mixed water and probe pocket for mixed water. Available with or without straight or angled shut-off ball valves G 3/4”F on primary side. Available with or without 3-speed standard pump WILO3F centre distance 130 mm or variable-speed electronic pump WILO4F centre distance 130 mm. Body made of nickel-plated CB753S brass; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Max differential pressure at mixing valve ends 250 mbar. AUM 03: expanded polypropylene insulating cover. T 5011 U: thermostatic head with incorporated control and immersion remote sensor. Range 30÷55 °C o 25÷50 °C. Cable lengh 2 m. RV 01: axial servomotor M30x1.5. 3-point adjustment 230 V AC or proportional 0-10 V 24 V AC with display. AUM 01 - AUM 11 D/S: high-temperature kit for UNIMIX/UNIMIX-C with primary side connections G 1” and plain manifolds with 3 outlets (EUROK outlets). Complete with fill/drain valve and differential pressure by-pass valve 0.2÷0.6 bar. Available with or without straight or angled shut-off ball valves G 1” primary side. AUM 02 - AUM 12 D/S: high-temperature kit for UNIMIX/UNIMIX-C with primary side connections G 1” and manifolds with 3 outlets (delivery: double micrometric adjustment lockshield; return: headwork for thermostatic control with protection cap; EUROK outlets). Complete with fill/drain valve and differential pressure by-pass valve 0.2÷0.6 bar. Available with or without straight or angled shut-off ball valves G 1”F on primary side. AC 613 FU: fixed setting 60 °C safety thermostat pre-wired.

Pressure boosting systems

Pressure boosting systems

Receptacle

Pressure boosting systems

The TopControl Modular DUO Twin is an automatic expansion and pressure-maintaining device. The unit contains 2 VFD pumps (2x 50%) and 2 electronically controlled overflow valves. A separate EP storage tank is required.

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Pressure boosting systems

Direct expansion air conditioners for IT Cooling application with fixed speed, direct expansion with under air supply for Cooling capacity between 035-136 kW

Direct expansion air conditioners for IT Cooling application with fixed speed, direct expansion with over air supply for Cooling capacity between 035-136 kW

Direct expansion air conditioners for IT Cooling application with fixed speed, direct expansion water cooled, with over air supply for Cooling capacity between 035-136 kW

Computer Room Air Conditioning (CRAC) unit: - Raised Floor version - Dual Fluid with air and chilled water cooling - Speed controlled compressor - Two refrigerant circuits - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Water Hammer Arrestor

Computer Room Air Conditioning (CRAC) unit: - Downflow version - Hybrid system for Indirect Free Cooling - Speed-controlled compressor - Two refrigerant circuits - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Direct expansion air conditioners for IT Cooling application with fixed speed, direct expansion with FC coil and water cooled, with under air supply for Cooling capacity between 035-098 kW

Computer Room Air Conditioning (CRAC) unit: - Raised Floor version - Air-cooled version with speed controlled compressor - Two refrigerant circuits - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Direct expansion air conditioners for IT Cooling application with fixed speed, direct expansion water cooled, with under air supply for Cooling capacity between 035-136 kW

Computer Room Air Conditioning (CRAC) unit: - Upflow version - Air-cooled version with speed controlled compressor - Two refrigerant circuits - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Direct expansion air conditioners for IT Cooling application with fixed speed, Dual Fluid: direct expansion with chilled water coil and water cooled, with under air supply for Cooling capacity between 035-098 kW

Direct expansion air conditioners for IT Cooling application with fixed speed, Dual Fluid: direct expansion with chilled water coil with under air supply for Cooling capacity between 035-098 kW

Computer Room Air Conditioning (CRAC) unit: - Raised Floor version - Air-cooled version with speed controlled compressor - One refrigerant circuit - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Computer Room Air Conditioning (CRAC) unit: - Upflow version - Hybrid system for Indirect Free Cooling - Speed-controlled compressor - Two refrigerant circuits - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Computer Room Air Conditioning (CRAC) unit: - Downflow version - Air-cooled version with speed controlled compressor - One refrigerant circuit - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Direct expansion air conditioners for IT Cooling application with fixed speed, direct expansion with FC coil and water cooled, with over air supply for Cooling capacity between 035-098 kW

Direct expansion air conditioners for IT Cooling application with fixed speed, Dual Fluid: direct expansion with chilled water coil and water cooled, with over air supply for Cooling capacity between 035-098 kW

Computer Room Air Conditioning (CRAC) unit: - Downflow version - Air-cooled version with speed controlled compressor - Two refrigerant circuits - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Computer Room Air Conditioning (CRAC) unit: - Upflow version - Hybrid system for Indirect Free Cooling - Speed-controlled compressor - One refrigerant circuit - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Expansion vessel

Computer Room Air Conditioning (CRAC) unit: - Raised Floor version - Hybrid system for Indirect Free Cooling - Speed controlled compressor - Two refrigerant circuits - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Computer Room Air Conditioning (CRAC) unit: - Raised Floor version - Hybrid system for Indirect Free Cooling - Speed controlled compressor - One refrigerant circuit - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Computer Room Air Conditioning (CRAC) unit: - Upflow version - Air-cooled version with speed controlled compressor - One refrigerant circuit - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Computer Room Air Conditioning (CRAC) unit: - Downflow version - Hybrid system for Indirect Free Cooling - Speed-controlled compressor - One refrigerant circuit - Medium-sized to large data centers Piping connection set separately. Must be combined with the unit.

Direct expansion air conditioners for IT Cooling application with fixed speed, Dual Fluid: direct expansion with chilled water coil with over air supply for Cooling capacity between 035-098 kW

Bomba de calor ACS È possibile combinare la pompa di calore con le seguenti centraline: sensoCOMFORT VRC 720 (f), multiMATIC VRC 700(f) o VWZ AI.

Expansion pump dispenser primary vessel

Pump dispenser expansion auxiliary vessel

Smart system for managing the heating system remotely via app. It allows remote control of all the zones in the house through time slots. Compatible with autonomous or centralized heating systems, at high or low temperature (e.g. radiators, radiant floor or ceiling, fan-coil). It can be used in public or private environment thanks to tamper controls. Installation of temperature sensors with no electrical connection. Temperature sensor with relay replaces the main chronothermostat and manages the switching on/off of the boiler (or zone valve with appropriate wiring). Operating system compatible with MyCubodomo App: Android 5.0 and iOS 8.0 onwards. Operating temperature range: -5 – 45 °C. Transmission frequency: 868,3 MHz. Signal range: 30 meters. Cube: power supply 5 V/1 A micro USB, Wi-Fi Standard FCC/CE/TELEC/KCC/SRRC/IC/NCC, protocollo Wi-Fi 802.11 b/g/n, frequency 2.4 GHz ~ 2.5 GHz (2400M ~ 2483.5M), dimensions (W x H x D) 100 x 100 x 100 mm. Temperature sensor (with or without relay): power supply 2 alkaline batteries AA (mod. LR6) 1.5 V, hysteresis on the set point temperature On-Off +/- 0,1°C, average battery life 3 years, dimensions (W x H x D) 87 x 87 x 28 mm. Actuator: power supply 3 alkaline batteries AA (mod. LR6) 1.5 V, connection M30x1.5, maximum closing distance 12 mm, insulation CLASS III, average battery life 3 years. Dimensions (W x H x D) 92 x 48 x 66 mm. Wiring Center: control unit equipped with radio module, power supply 230V 50/60 Hz, fuses F3 15A/250V, output switching relay max 2A/230V AC - 2A/30V DC, dimensions (W x H x D) 180 x 130 x 65 mm.

Micro KXZ- KXZME1- Heat Pump VRF outdoor unit - Heat Pump , Compact VRF outdoor unit, 22.4kW - 33.5kW in cooling - Compact design with small footprint for flexible installation (H1675 x W1080, D 480) - High efficiency with COP up to 4.0 - Easy and low cost installation by transportation in an elevator for six persons - Connect up to 22 indoor units, with 150% by capacity - Total piping length of 100m and a Maximum pipe run of 70m. - Wide range of controls, central controls and BMS systems are available.

Expansion vessel

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Dimensions (W x H x D): 295 x 290 x 75 mm.

Expansion vessel

Satellite module that independently manages high-temperature and low-temperature heating (direct and mixed circuits) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; mixing valve for fixed point mixing (with thermostatic control head and remote contact probe) or outside compensated temperature mixing (with axial servomotor and control unit); three-speed pump / model “E” with variable-speed pump EEI<20; summer/winter two-way valve on high-temperature and low-temperature circuits; pocket for temperature immersion probe on delivery side of primary circuit; balancing valve on primary circuit; balancing by-pass valve on mixed circuit; balancing lockshield of heating/domestic water circuit; hydraulic separator with built-in check valve; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. High-temperature domestic water outlet. Hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Box dimensions (W x H x D): 500 x 350 x 90 mm.

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with manifolds, box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass (externally zinc-plated). Manifolds material: CW617N brass (externally zinc-plated). Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: EUROK. Box dimensions (W x H x D): 500 x 350 x 90 mm.

IVAR EQCP1 (Kv 2.50): Two-way metering module for heating and cooling systems with DHW distribution lines and heat metering unit, equipped with template sockets instead of heat meters. Heat module consisting of CW617N brass monobloc with 2-way piston zone valve with M30×1.5 mm connection, selector balancing valve, filter, pocket for heat meter delivery sensor, M10×1 pressure pocket for dynamic balancing valve. Shut-off valves on the delivery and return to the boiler, on the delivery and return from the users, with slots for sealing. Drop pressure of the heat metering module Kv = 3.5. Placed on decomposable brackets and insulated with PP shell. Connections to the uprising columns and to the users of the G 3/4" heat module. Predisposition for heat meter with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Domestic block with G 3/4" connections that can be intercepted with ball valves with sealing slots. Predisposition for insertion of DHW volumetric meters with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Code 506587CB assembled in steel flush-mounted metal box with standard painted door, dimensions H 510 ×L 510 ×D 130 mm. Code 506587CL assembled in steel flush-mounted metal box with plasterable door, dimensions H 520 ×L 520 × D 130 mm. Max static operating pressure 10 bar; fluid temperature range 3÷90 ◦C. IVAR EQCP1 (Kv 3.00): Two-way metering module for heating and cooling systems with DHW distribution lines and heat metering unit, equipped with template sockets instead of heat meters. Heat module consisting of CW617N brass monobloc with 2-way piston zone valve with M30×1.5 mm connection, selector balancing valve, filter, pocket for heat meter delivery sensor, M10×1 pressure pocket for dynamic balancing valve. Shut-off valves on the delivery and return to the boiler, on the delivery and return from the users, with slots for sealing. Drop pressure of the heat metering module Kv = 3.5. Placed on decomposable brackets and insulated with PP shell. Connections to the uprising columns and to the users of the G 3/4" heat module. Predisposition for heat meter with G 3/4" connections, length 130 mm and nominal flow rate Qnom = 2.5 m3/h. Domestic block with G 3/4" connections that can be intercepted with ball valves with sealing slots. Predisposition for insertion of DHW volumetric meters with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Code 506539CB assembled in steel flush-mounted metal box with standard painted door, dimensions H 510 ×L 510 ×D 130 mm. Code 506539CL assembled in steel flush-mounted metal box with plasterable door, dimensions H 520 ×L 520 × D 130 mm. Max static operating pressure 10 bar; fluid temperature range 3÷90 ◦C.

The modular manifolds EASY LOCK series are characterised mainly by their ability to be connected to each other in an easy and practical way; threads are designed in order that EASY LOCK manifolds can be connected together having an aligned and sealed connection without using any sealing element. Manifolds are only externally nichel plated; therefore, yellow inside, making them suitable for drinking water use. They are available in several versions: with manually operated isolation valves (with blue or red hand wheel); with manually operated isolation valves (with blue or red hand wheel) and 30° inclined connections; plain (with no manually operated isolation valves). Plastic box with bottom for modular manifolds (without fastening kit, to order separately). H: from 350 to 400 mm. W: from 350 to 800 mm. D: from 90 to 95 mm. With/without protection for plastering operations.

Mixing and boosting unit IVAR COMBIMIX for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), two shut-off ball valves for the pump, two fill/drain valves, two automatic air vent valves, three thermometers 0÷80 °C (on delivery and return of boiler circuit and on delivery of mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut-off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M with swivelling nipples (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T5011 included (max differential pressure at mixing valve ends 250 mbar) or set up for outside compensated temperature mixing by integrating axial servomotor IVAR RV 01 or thermoelectric actuator IVAR TE 3061. Differential bypass valve (optional) 0.2÷0.6 bar with half-hard nickel-plated pipe. Pump space 130 mm or 180 mm, G 1”1/2F flat seal connections. Equipped with variable-speed electronic pump WILO4F or variable-speed electronic pump WILO4F-180 or without pump. Accessories: high-temperature kit with pair of manifolds 1” x EUROK with shut-off and lockshield valves CEP/02 I – CEP/03 I (2 ways) – (3 ways), high-temperature kit with pair of simple manifolds 1” x EUROK CEP/02 – CEP/03 (2 ways) – (3 ways), insulation shell ACM 01, threaded spacer for pumps AC 633.

Satellite module that independently manages low-temperature heating (mixed circuit) and instantaneous production of domestic hot water in each apartment when installed in district heating systems. Components: 30 plates heat exchanger; priority valve for domestic water circuit controlled by 230 V AC – 6 W motor; anti-scalding thermostatic mixing valve 36÷50 °C; anti-scalding device on domestic hot water circuit; thermometer on domestic hot water circuit; anti-pollution check valve at the inlet of domestic cold water circuit; mixing valve for fixed point mixing (with thermostatic control head and remote contact probe) or outside compensated temperature mixing (with axial servomotor and control unit); three-speed pump / model “E” with variable-speed pump EEI<20; summer/winter two-way valve; pocket for temperature immersion probe on delivery side of primary circuit; balancing valve on primary circuit; balancing by-pass valve on mixed circuit; balancing lockshield of heating/domestic water circuit; hydraulic separator with built-in check valve; shut-off ball valve; manual air vent valve; fill-drain valves; protection filter for heat meter; expanded polypropylene insulating shell; multifunctional electronic board. Circuit connections: 3/4” flat seal. Indicative power (to be verified according to the conditions of use): 10 kW heating side, 32 kW domestic water side. Production of 12 l/min of 48°C domestic water. Model “1” with high-temperature domestic water outlet. Model “R” with hot domestic water recirculation circuit complete with pump, check valve and electronic temperature sensor for domestic hot water priority mode activation. Installation: on frame, “C” in wall fitted box made of galvanized sheet-metal cover (white painted) 860-960 × 700 × 110-160 mm, “M” in wall hanging box made of aluminium (white painted) 722 × 600 × 150 mm. Optional accessories: mechanical or ultrasonic heat meter 1,5 o 2,5 m3/h, cold domestic water flow meter 1,5 m3/h, thermoelectric actuator, thermostatic control head, axial servomotor.