VRF ducted low/middle static pressure - Indoor unit (R32) - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 100 Pa - Installation flexibility as thin design with 280mm height - Standard built- in drain pump - Transparent access hole to drain pan to check the drain pan without removing drain pan - Reduced energy consumption by applying DC fan motor

VRF ducted high static pressure - Indoor unit (R32) - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 200 Pa - Installation flexibility as thin design with 280mm height - Standard built- in drain pump - Transparent access hole to drain pan to check the drain pan without removing drain pan - Reduced energy consumption by applying DC fan motor

VRF compact ceiling cassette -4way- Indoor unit (R32) - European design & Flat panel - Draft Prevention Panel as an option - Individual flap control system - Motion Sensor to improve the comfort and energy saving performance of the unit

VRF wall mounted - Indoor unit (R32) - Stylishly designed with rounded contours that fit beautifully into any of Europe’s diverse interior settings - Flap control system - Powerful air flow design that is proven achieve uniform air conditioning even to the furthest corners of the room

VRF ceiling cassette -4way- Indoor unit (R32) - Draft Prevention Panel as an option - Individual flap control system - Drain can be discharged upwards by 850mm from the ceiling surface. - Motion Sensor to improve the comfort and energy saving performance of the unit. - Component design can acheive better aerodynamic perfromance and lower noise level

RAC Multi system - Outdoor Unit - High seasonal efficiency thanks to the application of inverter technology - Flexibility of installation with a total pipe length of 75 m and up to 5 connectable indoor units - Thanks to the application of the Twin Rotary compressor, the unit achieves low noise levels

Heat pump micro inverter - Outdoor unit - High cooling capacity under standard conditions and operates efficiently in extreme conditions down to -15 C - Freedom of piping layout increased by providing 4 possible configurations of refrigerant piping - Equipped with 4 handles at the same level and on each side of the unit to facilitate the handling and installation - Plastic cover is mounted over control boards in standard to facilitate the maintenance - Precharged piping length of 30 m

Duct Connected - High static pressure - Indoor unit - Adjustable external static pressure by wired remote controller - Wide External Static Pressure from 10 to 200 Pa - Energy efficiency is improved by using DC fan motor & high efficient heat exchanger - Zoning system: effective temperatures control of multiple rooms with one indoor duct unit - Quiet operation (sound pressure level of 45 dBA) is achieved thanks to DC fan motor - Motion sensor (option): detects the presence/absence and human activity in a room to improve comfort and energy saving - Impeller and motor can be pulled out easily and maintenance can be carried out from the right or bottom side

Monobloc air source heat pump

Monobloc air source heat pump

Heat pump outdoor unit

Heat pump outdoor unit

1-way ceiling cassette indoor unit

Floor-standing inverter heat pump

High performance; easy-to-install.The Caleffi SinkMixer™ 5212 scald protection undersink thermostatic mixing valve is precision engineered to deliver safe tempered water. Patent pending forged low-lead brass valve body enables high flow capacity in a very compact body. The easy-to-install 4-port design connects all water lines and, compared to standard 3-port valves, requires less piping and no tee. ICC-ES certified compliance to NSF/ANSI/CAN 61-2019 and IPC, IRC, UPC and NPC for drinking water systems in accordance with the U.S. and Canadian plumbing codes.

High performance; easy-to-install.The Caleffi SinkMixer™ 5212 scald protection undersink thermostatic mixing valve is precision engineered to deliver safe tempered water. Patent pending forged low-lead brass valve body enables high flow capacity in a very compact body. The easy-to-install 4-port design connects all water lines and, compared to standard 3-port valves, requires less piping and no tee. ICC-ES certified compliance to NSF/ANSI/CAN 61-2019 and IPC, IRC, UPC and NPC for drinking water systems in accordance with the U.S. and Canadian plumbing codes. The 5212AP product includes compression union connections with plug for cold water outlet and copper compression fittings kit for hard piping installations.

The PresCal™ Compact 533H series pressure reducing valve, ideal for small system applications, is constructed of a DZR low-lead forged brass body and incorporates a unique noise reducing and high flow seat design. It is easily serviced with a replaceable cartridge and has an integral stainless steel filter (35 mesh), helpful for water systems that may contain sediment or debris. A tamper-resistant cap is included to replace the standard cap to hide the adjustment screw to help prevent set point tampering.The valve complies with NSF/ANSI 61 (180°F/82°C Commercial Hot) as certified by ICC-ES, and complies with NSF/ANSI 372, low lead, and codes IPC, IRC, NPC and UPC for use in accordance with the US and Canadian plumbing codes, as certified by ICC-ES.

The QuickSetter+™ manual balancing valve contains a built-in flow meter and sight gauge, negating the need for differential pressure gauges and reference charts. Circuit balancing is fast, easy and accurate. Constructed of DZR low-lead brass, QuickSetter+ is ideally suited for use in plumbing applications such as hot water recirculation systems. The built-in check valve protects against circuit thermo-siphoning. The outlet dual-scale temperature gauge (optional) verifies the fluid temperature in the circuit. The flow meter sight gauge is dry (not exposed to the fluid) thus eliminating the possibility of gauge clouding/scaling over time. The QuickSetter+ can also be used in heating systems. Peroxide-cured EPDM seals provide chlorine and chloramine resistance and long operating life.

Stable mixed temperature performance with durable construction for long life. Due to the unique mixing chamber design, Caleffi MixCal™ produces very stable mixed water temperature as inlet temperatures and pressures vary. Scale formation is minimized via sliding surfaces constructed of an anti-scale polymer, thus guarding against seizing or erratic mixed temperatures. O-ring seals made from durable peroxide-cured EPDM resist wear from common water treatment additives such as chlorine and chloramines.

Chiller, air source for outdoor installation with refrigerant type R134a

Chiller, air source for outdoor installation with refrigerant type R513A

Air-Water Heat Pump

Air-Water Heat Pump

A steel low loss header with (microbubble) deaerator and dirt separator including an internal magnet with a DN65 or DN100 flange connection, developed for Remeha

A steel low loss header with (microbubble) deaerator and dirt separator with a DN65 or DN100 flange connection, developed for Remeha

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 9 and 16 bar. I: insulated R: with direct refill

Indoor floor mounted boiler

Silencer

CO2 Sensor wall-mounted

Heat exchanger commercial series

Vertical Lossnay with Silencer Box P-500SB-E

Vertical Lossnay with Silencer Box P-500SB-E

Vertical Lossnay with Silencer Box P-350SB-E

Vertical Lossnay with Silencer Box P-350SB-E

Vertical Lossnay with Silencer Box P-250SB-E

Vertical Lossnay with Silencer Box P-250SB-E

Remote controller

HeatSwitch

HeatSwitch

Interacumulador Inox Tank in Tank de gran producción de ACS. Posición suelo, mural vertical y mural horizontal.

Interacumulador Inox Tank in Tank de gran producción de ACS de aislamiento de metal. Posición suelo.

Interacumulador Inox Tank in Tank de gran producción de ACS de aislamiento desmontable. Posición suelo.

Interacumulador Inox Tank in Tank de gran producción de ACS con escotilla de inspección y conexiones sanitarias en la parte inferior. Posición suelo.

Caldera eléctrica solo calefacción de alta potencia. Posición suelo.

Productor de agua caliente de condensación a gas con tecnología de tank-in-tank de acero inoxidable

Productor de agua caliente de condensación a gas con tecnología de tank-in-tank de acero inoxidable

Calderas murales Inox de condensación a gas de alta potencia para calefacción

Calderas murales Inox de condensación a gas de alta potencia para calefacción

Caldera de pie de doble servicio "TOTAL condensing" a gas con tecnología de tank-in-tank de acero inoxidable para producción sanitaria

Caldera de pie de doble servicio "TOTAL condensing" a gas con tecnología de tank-in-tank de acero inoxidable para producción sanitaria

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 5 and 10 bar. I: insulated R: with direct refill

A brass (microbubble) deaerator with a 22 mm - 2" universal connection

Hydraulic deaerators and dirt separators with magnet

A brass dirt separator with magnet and a 22 mm - 2" universal connection

Hydraulic deaerator and dirt separator

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 2.5 and 6 bar. I: insulated B: with break tank R: with direct refill

A fully automatic vacuum degasser for closed heating, cooling and process systems with a pressure between 1 and 4 bar. I: insulated B: with break tank R: with direct refill

A steel dirt separator with magnet for standard flow rate (1.5 m/s) with a DN50 - DN300 connection

A steel low loss header with (microbubble) deaerator and dirt separator with a DN50 - DN300 connection

A demountable steel (microbubble) deaerator and dirt separator for high flow rate (3 m/s) with a DN50 - DN300 connection

A steel (microbubble) deaerator and dirt separator with magnet for standard flow rate (1.5 m/s) with a DN50 - DN300 connection

A steel (microbubble) deaerator for high flow rate (3 m/s) with a DN50 - DN300 PN16 connection

A steel (microbubble) deaerator for standard flow rate (1.5 m/s) with a DN50 - DN300 connection

A steel dirt separator for high flow rate (3 m/s) with a DN50 - DN300 connection

A brass dirt separator with a 22 mm - 2" horizontal connection

A brass air vent for heating- and cooling systems with a ½" connection

Heat pump outdoor unit

Multi System Inverter Heat Pump - Outdoor Unit

Multi System Inverter Heat Pump - Outdoor Unit

Multi System Inverter Heat Pump - Outdoor Unit

Multi System Inverter Heat Pump - Outdoor Unit

Multi System Inverter Heat Pump - Outdoor Unit

Multi System Inverter Heat Pump - Outdoor Unit

Reversible unit, air source, VSD screw compressors and EC fans, for outdoor installation with refrigerent type R134a

Reversible unit, air source, VSD screw compressors and EC fans, for outdoor installation with refrigerent type R513A

Robot Compact Pro steel manifold

Robot District Heating Pro steel manifold

Robot Optimum Flow Pro steel manifold

Robot LT steel manifold

System pro E power Top Busbar System switchboard

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator

Central heating radiator