Cuadro de montaje universal

Cuadro de montaje universal

Cuadro de montaje universal

Heat Pump, Air/Water You can combine your heat pump with the following controllers: MiPro Sense SRC 720, MiPro Sense R SRC 720f, MiPro, MiPro R, RED-3, RED-5, HP IM or MiLink v3 SR 921.

Heat Pump, Air/Water You can combine your heat pump with the following controllers: MiPro Sense SRC 720, MiPro Sense R SRC 720f, MiPro, MiPro R, RED-3, RED-5, HP IM or MiLink v3 SR 921.

Long bend for trap connection

Bend with cap for trap connection

The Mark Airstream HWX is an heat recovery unit equipped with rotary heat exchanger. There are 9 types available ranging in air volume from 1500 m3/h to 27500 m3/h for both indoor and outdoor installation. The following configurations are available: A1: Airstream HWX A2: Airstream HWX with after-heater or cooler A3: Airstream HWX with after-heater and cooler A4: Airstream HWX with damper(s) A5: Airstream HWX with damper(s), after-heater or cooler A6: Airstream HWX with damper(s), after-heater and cooler A7: Airstream HWX with outdoor- and recirculation damper A8: Airstream HWX with outdoor- and recirculation damper, after-heater or cooler A9: Airstream HWX with outdoor- and recirculation damper, after-heater and cooler

The Mark Airstream CFX is an heat recovery unit equipped with high-efficiency counterflow heat exchanger with bypass. There are 12 types available ranging in air volume from 600 m3/h to 20.000 m3/h for both indoor and outdoor installation. The following configurations are available: A1: Airstream CFX A2: Airstream CFX with after-heater or cooler A3: Airstream CFX with after-heater and cooler A4: Airstream CFX with damper(s) A5: Airstream CFX with damper(s), after-heater or cooler A6: Airstream CFX with damper(s), after-heater and cooler

Micro KXZ Heat pump VRF outdoor Unit -Connect up to 10 indoor units/up to 150% capacity. -High efficiency with COP (in cooling) up to 4.44 -These units employs DC inverter compressors ONLY. -Total piping length up to 100m and a maximum pipe run of 70m.

Heat pump hyper inverter - Outdoor unit - Hyper Inverter range (high efficiency) from 10 to 14 kW in cooling mode - More environmental friendly thanks to the use of R32 refrigerant - Leading powerful heating capacity in the industry thanks to expansion valve control and twin rotary compressor technology - High efficiency in both cooling and heating by achieving energy labels A++ - The innovative fin configuration (M shape) offers an optimal balance between heat transfer and airflow - Wide range of operation down to -20 ?C in heating and -15 ?C in cooling - Design flexibility optimised with a compatible piping length up to 100 m with a precharged piping length of 30 m

Duct Connected - Low/Middle Static Pressure - Indoor unit - Thin design with a height of only 280 mm for all the models - Zoning system: effective temperatures control of multiple rooms with one indoor duct unit - Automatic External Static Pressure control: indoor unit will automatically recognize ESP by itself and keep the rated air flow volume - Motion sensor (option): detects the presence/absence and human activity in a room to improve comfort and energy saving - Impeller and motor can be pulled out easily and maintenance can be carried out from the right or bottom side - Drain-pump (600 mm) is mounted in all models and the drain pan is equipped with a window to quickly check the cleanliness - Compatible with R410 and R32 refrigerants

Buffer tank for central heating system

Buffer tank for central heating system

Buffer tank for central heating system

Buffer tank for central heating system

Domestic hot water heat pump

Ground source heat pump for larger properties

Inverter-controlled ground source heat pump for larger properties

Domestic hot water booster heat pump

Heat pump hyper inverter - Outdoor unit - Hyper Inverter range (high efficiency) from 10 to 14 kW in cooling mode - Leading powerful heating capacity in the industry thanks to expansion valve control and twin rotary compressor technology - High efficiency in both cooling and heating by achieving energy labels A++ - The innovative fin configuration (M shape) offers an optimal balance between heat transfer and airflow - Wide range of operation down to -20 ?C in heating and -15 ?C in cooling - Design flexibility optimised with a compatible piping length up to 100 m with a precharged piping length of 30 m

Duct Connected - High static pressure - Indoor unit - Adjustable external static pressure by wired remote controller - Wide External Static Pressure from 10 to 200 Pa - Energy efficiency is improved by using DC fan motor & high efficient heat exchanger - Zoning system: effective temperatures control of multiple rooms with one indoor duct unit - Quiet operation (sound pressure level of 45 dBA) is achieved thanks to DC fan motor - Motion sensor (option): detects the presence/absence and human activity in a room to improve comfort and energy saving - Impeller and motor can be pulled out easily and maintenance can be carried out from the right or bottom side

Ceiling Cassette - 4way - Indoor unit - Individual Flap Control System: four directions of air flow can be controlled individually - Quiet operation down to 26 dBA while keeping capacity and comfort - Draft Prevention Panel (option) prevents cold/hot draft being blown directly on the user - Motion sensor (option): detects the presence/absence and human activity in a room to improve comfort and energy saving - Powerful blowout carries comfortable air flow and is well suited for high ceilings - Drain can be discharged upward by 850mm from the ceiling surface and allows high degree of freedom - Compatible with R410 and R32 refrigerants

Ceiling Suspended - Indoor unit - Slim and sleek design starting at just 28 kg in weight to 43 kg for the largest model - The industry's lowest sound pressure levels were achieved by decreasing air flow volume, decreasing pressure loss and optimizing casing and distributor shape - Flap control system: flap can be set to wide angle position to provide a comfortable air flow - Freedom of piping layout increased by providing 3 possible configurations of refrigerant piping (up, right, rear) - Motion sensor (option): detects the presence/absence and human activity in a room to improve comfort and energy saving - Compatible with R410 and R32 refrigerants

Ceiling Cassette - 4way compact - Indoor unit - New European compact design with flat panels that perfectly fit the standard ceiling (600 x 600) - Light (14 kg) and thin (248 mm), this product allows a very easy installation - Draft Prevention Panel (option) prevents cold/hot draft being blown directly on the user - Individual Flap Control System: four directions of air flow can be controlled individually - Quiet operation by adopting new turbo fan and improving new heat exchanger enables noise reduction - Drain can be discharged upward by 850mm from the ceiling surface and allows high degree of freedom - Powerful blowout carries comfortable air flow and is well suited for high ceilings - Compatible with R410 and R32 refrigerants

Duct Connected - High static pressure - Indoor unit - Adjustable external static pressure by wired remote controller from 10 to 200 Pa - Energy efficiency is improved by using DC fan motor & high efficient heat exchanger - Zoning system: effective temperatures control of multiple rooms with one indoor duct unit - Quiet operation (sound pressure level of 37-38 dBA) is achieved thanks to DC fan motor - Motion sensor (option): detects the presence/absence and human activity in a room to improve comfort and energy saving - Impeller and motor can be pulled out easily and maintenance can be carried out from the right or bottom side - Drain-pump (600 mm) is mounted in all models and the drain pan is equipped with a window to quickly check the cleanliness - Compatible with R410 and R32 refrigerants

2-way modular dual distributon manifold

3-way cross modular manifold cold water

3-way modular manifold with offset cold water

4-way modular manifold with offset hot water

2-way modular manifold for domestic cold water distribution

4-way modular manifold for domestic hot water distribution

4-way modular manifold with cap cold water

4-way modular manifold with offset cold water

3-way modular manifold with cap cold water

3-way modular manifold hot water

4-way modular manifold hot water

2-way cross modular manifold hot water

3-way modular manifold cold water

2-way modular manifold cold water

4-way modular manifold for domestic cold water distribution

2-way modular manifold with cap hot water

2-way modular manifold with offset cold water

3-way modular manifold for domestic cold water distribution

4-way cross modular manifold cold water

4-way modular manifold cold water

4-way modular manifold with cap hot water

2-way cross modular manifold cold water

2-way modular manifold with offset hot water

3-way modular manifold for domestic hot water distribution

2-way modular manifold with cap cold water

3-way modular manifold with offset hot water

4-way cross modular manifold hot water

2-way modular manifold for domestic hot water distribution

2-way modular manifold hot water

3-way cross modular manifold hot water

3-way modular dual distributon manifold

3-way modular manifold with cap hot water

4-way modular dual distributon manifold

9-way modular manifold with cap cold water

9-way modular manifold with offset hot water

10-way modular manifold for domestic hot water distribution

10-way modular manifold with offset cold water

10-way modular manifold with offset hot water

10-way modular manifold cold water

10-way cross modular manifold hot water

10-way modular manifold hot water

9-way modular manifold cold water

10-way modular manifold with cap cold water

10-way modular manifold for domestic cold water distribution

9-way modular manifold for domestic hot water distribution

9-way modular manifold hot water

9-way modular manifold with offset cold water

10-way cross modular manifold hot water

9-way cross modular manifold cold water

9-way modular manifold with cap hot water

10-way cross modular manifold cold water

9-way modular manifold for domestic cold water distribution

10-way modular manifold with cap hot water

5-way modular manifold with cap cold water

5-way modular manifold with cap hot water

5-way modular manifold with offset hot water

5-way modular manifold with offset cold water

5-way cross modular manifold cold water

5-way modular manifold for domestic cold water distribution

5-way modular manifold for domestic hot water distribution

5-way modular dual distributon manifold

5-way cross modular manifold hot water

5-way modular manifold cold water

5-way modular manifold hot water

6-way modular manifold with cap hot water

6-way cross modular manifold cold water

6-way cross modular manifold hot water

8-way cross modular manifold cold water

7-way cross modular manifold cold water

7-way modular manifold for domestic hot water distribution