Corner tee with wall flange

Wall plate elbow 90° with female thread

Wall plate elbow 90° with female thread

Colectați piesa T DN 110

Silent-Pro combined corner branch fitting 87.5°, swept-entry, right

Silent-Pro combined corner branch fitting 87.5°, swept-entry, left

Silent-Pro duct branch fitting 87.5°, swept-entry, right

Silent-Pro duct branch fitting 87.5°, swept-entry, left

Silent-Pro parallel branch fitting 45°

Silent-Pro combined branch fitting 87.5°, swept-entry

Silent-PP combined corner branch fitting 87.5°, swept-entry, right

Silent-PP combined corner branch fitting 87.5°, swept-entry, left

Silent-PP duct branch fitting 87.5°, swept-entry, right

Silent-PP duct branch fitting 87.5°, swept-entry, left

Silent-PP parallel branch fitting 45°

Silent-PP combined branch fitting 87.5°, swept-entry

90° 3-way ball branch

Cup Ø 50 mm, universal valve, valve sealing plug, flat seal for valve top, adjustment tube 100 mm, drain tube 200 mm

90° 4-way ball branch

135° 3-way ball branch

Wall union passage, female

Wall union, female

Double wall union, female, two outlets

POLO-KAL 3S Pro

Straight fitting

Straight fitting

Long bend for trap connection

Long bend for trap connection

Bend with cap for trap connection

Made of CW 617N brass fittings, TURBO PRESS, with integrated hose tail and two ageing-resistant and leak proof EPDM rings, they withstand high pressure and high temperature ensuring the hydraulic tightness. the design of the O-ring LBP (Leak before press) allows to identify a possible leakage of the fluid, during the testingphase of the installation, in case the fittings was not pressed. The TURBO PRESS fittings are suitable for tooling with TH, B, U e H, clamp’s profile till size 32, while for larger sizes they are suitable with TH jaws.

The patented “ TURBO PRESS GAS”, our multilayer pipe and fitting system, offers the most extensive guarantee for the house gas installations. The system makes very easy and reliable the laying of new installations and very practical in revising the existing ones. Pipes and fittings are assembled by means of electro-mechanical pressing tools with TH profile, that permanently deform the stainless steel AISI 304 bushing and ensuring the perfect union and seal of the two parts.

Made of CW 617N brass fittings, TURBO PRESS, with integrated hose tail and two ageing-resistant and leak proof EPDM rings, they withstand high pressure and high temperature ensuring the hydraulic tightness. the design of the O-ring LBP (Leak before press) allows to identify a possible leakage of the fluid, during the testingphase of the installation, in case the fittings was not pressed. The TURBO PRESS fittings are suitable for tooling with TH, B, U e H, clamp’s profile till size 32, while for larger sizes they are suitable with TH jaws.

The patented “ TURBO PRESS GAS”, our multilayer pipe and fitting system, offers the most extensive guarantee for the house gas installations. The system makes very easy and reliable the laying of new installations and very practical in revising the existing ones. Pipes and fittings are assembled by means of electro-mechanical pressing tools with TH profile, that permanently deform the stainless steel AISI 304 bushing and ensuring the perfect union and seal of the two parts.

Balcony Pot 80 mm with 50 mm side inlet

Balcony Pot 80 mm with 90 ° bend in PVC with 80 mm spigot end

Balcony pot 50-60 mm with 90 ° bend in PVC without 70 mm spigot end

Bend for trap connection

Ventilation branch

Wingback elbow gas

Shaft branch right

Parallel branch

Unilateral double branch max flow

Elbow fitting 15° hot water

Elbow fitting 15° cold water

Terminal fitting cold water

Wingback elbow hot water

Terminal U fitting hot water

Wingback elbow hot water

Terminal U fitting cold water

Wingback elbow hot water

Kit with nut for manifolds

Wingback elbow cold water

ABS inspection pipe with oval access

Terminal fitting hot water

Derivation clamp for multilayer systems

Straight fitting with cap

Elbow fitting with extension

Fitting with bend

Wingback elbow cold water

Wingback elbow cold water

Low wingback elbow cold water

Low wingback elbow hot water

Siphon complete

T-piece

BackFlip bend

BottomTurn bend

Bottle odour trap

Pre-Formed Pipe Bridge

Elbow with Wallnut

Air Tube Pipe Bridge

FF Pipe Bridge

Double Elbow with Wallnut

Pipe Bridge

Flexible Tube

Roth Thermaset Distributor

Roth RIS Comprehensive drinking water and heating installation with the Roth pipe installation system

Duș pentru corp și ochi, montaj mural, modular

Condensate drain

Rezervor mascat pentru pisoar

Rezervor disponibil în culorile alb, umbra și negru

Wall plate elbow 90° FF

Rezervor mascat pentru bideu

Firenze trap with access

Double increaser

87°30’ corner branch

Parallel branch

Bend for trap connection with cap, without grommet

Bend for trap connection with cap, without grommet

Grey bend with right inlet

Grey bend with two inlets

Grey bend with left inlet

87°30’ bend with front inlet with seal

Back to back connector for trap with caps

Unspecified Urinal Control

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Dimensions (W x H x D): 295 x 290 x 75 mm.

Temperature control and thermal disinfection multifunctional unit for sanitary systems. It allows the temporary by-pass of the thermostatic mixing valve to supply high-temperature water to the system terminal units for the thermal disinfection. Provided with/without thermoelectric actuator on the three-way valve, with box and fastening kit. Shut-off ball valves at the inlets. Thermoelectric actuator: ON/OFF 230 V AC normally closed (2 wires). Max fluid temperature: 90° C. Maximum operating pressure: 10 bar. Max pressure differential at three-way valve ends: 1 bar. Main body material: CW617N brass. Box material: high impact polystyrene. Branches material: copper. Sealing elements material: Peroxide EPDM. Inlet connections: 3/4” F. Outlet connections: 3/4" M. Box dimensions (W x H x D): 500 x 350 x 90 mm.