IVAR Dirtstop® XL: triple effect magnetic dirt separator: cyclonic action guaranteed by a patented internal insert, developed to guide the fluid directed to the boiler in order to maximize the slowing down and decantation of the debris; subsequent removal of ferrous particles by means of a neodymium magnet, magnetic field 14000 G; mechanical filtration with an 800 μm mesh filter (pre‑ assembled 500 μm filter for the first cleaning of the system). Internal components completely inspectable, removable and washable by removing the upper plug, with the special lever provided. Manual air vent valve. Draining valve with opening lever and tap. Swivel fitting for mounting to the pipeline in different orientations, with the special lever provided. Allowed installation on horizontal, vertical or oblique lines. Buttonhole on magnetic insert, sealing band supplied. Materials: body, cyclonic insert and cap in PA66 + GF 30%; ''T'' joint and locking ring nut in PA66 + GF 30%; filters in stainless steel AISI 304; seals in peroxide EPDM. Compatible fluids: water; water + glycol max 50%. Maximum recommended flow rate: 2.13 m3/h. Maximum operating pressure: 3 bar. Operating temperature: 0‑90 °C. Flow coefficient Kv: 6.7 m3 /h. Connections: Ø22 x Ø22 copper pipe (520124); 3/4'' F x 3/4'' F (520135); 1''F x 1'' F (520136); 1''1/4 F x 1''1/4 F (520139).

IVAR NEOVENT deaerator range designed to ensure continuous and effective removal of air from hydraulic circuits in HVAC and heating systems. Material: brass. Maximum operating pressure: 10 bar. Maximum discharge pressure: 10 bar. Fluid temperature: 0 °C +110 °C. Operating modes: automatic, manual, closed. Installation position: vertical only.

IVAR NEOVENT air vent valves are designed to remove air that accumulates within HVAC system circuits. Material: brass. Maximum operating pressure: 10 bar. Maximum discharge pressure: 10 bar. Fluid temperature: 0 °C +110 °C. Body fully orientable at 360°. Operating modes: automatic, manual, closed. Installation position: vertical only.

IVAR NEOVENT deaerator range designed to ensure continuous and effective removal of air from hydraulic circuits in HVAC and heating systems. Material: brass. Maximum operating pressure: 10 bar. Maximum discharge pressure: 10 bar. Fluid temperature: 0 °C +110 °C. Operating modes: automatic, manual, closed. Orientable tee connection.

IVAR Dirtstop® mini magnetic dirt separator with transparent filter chamber; compact design, with connection union for installation below the boiler. The dual filter action is provided by a neodymium magnet (magnetic induction B = 1.2 T (12, 000 G)) and an 800 μm AISI 304 stainless‑steel mesh strainer. The neodymium magnet is diametrically polarised and provides a homogeneous magnetic field which maximises the capture of ferrous impurities. The mesh filter captures all other impurities. Impurities, which precipitate out in the transparent filtration chamber, can then be emptied without draining the heating system if the check valve is installed on the boiler inlet. Materials – Body: Grilamid. Ball‑type shutoff valve, swivel union and caps: CW617N brass. Sealing elements: peroxide‑cured EPDM. Temperature: 0, 90 °C. Max pressure: 3 bar. Compatible with water or glycol solution, max. 50%. Flow factor Kv: 5 m³/h. Filter connections 3/4" M x 3/4" M, Fitting connections (swivelling): 3/4" F x3/4" F. Check valve provided in the package with code 520550, not included with code 520555.

Filtro per pompe di calore in ottone con magnete e attacco universale da 22 mm – 1¼"

Separatore d'aria e defangatore in acciaio per flusso standard (1, 5 m/s) DN50, DN300

Un defangatore in acciaio per flusso standard (1, 5 m/s) DN50, DN300

Compensatore idraulico separatore d'aria e defangatore con magnete in acciaio con connessione flangiata DN50, DN300

Compensatore idraulico separatore d'aria e defangatore in acciaio DN50, DN300

Defangatore con magnete in acciaio per flusso standard (1, 5 m/s) DN50, DN300

Separatore d'aria e defangatore in acciaio per alto flusso (3 m/s) con connessione DN50, DN300

Separatore d'aria e defangatore con magnete in acciaio per flusso standard (1, 5 m/s) DN50, DN300

Separatore d'aria e defangatore smontabile in acciaio per alto flusso alta (3 m/s) DN50, DN300

Separatore d'aria in acciaio per flusso standard (1, 5 m/s) con connessione flangiata DN50, DN300

Separatore d'aria in acciaio per alto flusso (3 m/s) con connessione DN50, DN300

Defangatore in acciaio per alto flusso (3 m/s) DN50, DN300

Defangatore in ottone con connessione orizzontale da 22 mm, 2"

Defangatore con magnete in ottone con connessione universale da 22 mm, 2"

Compensatore idraulico in ottone per la separazione dell'aria (microbolle) e la separazione magnetica delle impurità con connessione da 1", 1½"

Hydraulic deaerator and dirt separator

Defangatore con magnete in ottone con connessione universale da 22 mm, 1".

Cable shafts

Single‑flow units

Double‑flow units

Nozzles and diffusers

Fire

Fans and extraction boxes

Flat roof drainage

System overlapping components

GM‑X composite drainage pipes

GM‑X drainage pipes

Parking garage drainage

Balcony/terrace drainage

Bathroom drainage

BlauPlast

System overlapping components

Standard galvanized

Galvanized with seal

Standard aluminum

Double‑walled ventilation system

Air diffusers

Boilers

Hot water preparation

Ventilation and air treatment

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design, including Airvent

Connection DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 10, 150 m3/h, fully insulated

Connection DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 10, 150 m3/h, NOT insulated

Dirt, Magnetite and Air Combi Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8, 7 …13, 9 M3], Brass, Swivel design

Dirt and Magnetite Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8, 7 …13, 4 M3], Brass, Swivel design

Air and Microbubble Separator with Cu22, Cu28, ¾" of 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design

Dirt and Magnetite Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, with insulation

Dirt and Magnetite Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, without insulated

Air and Microbubble Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, with insulation

Air and Microbubble Seperator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, without insulated

Dirt and Magnetite Separator with ¾", 1", 1¼", 1½" or 2" connection PN10, Max Kv [13, 2 …73, 1 M3], Brass

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design

Partial flow filter for continuous cleaning of the system for central heating and cooling installations

Partial flow filter for continuous cleaning of the system for central heating and cooling installations

Separatore d'aria e defangatore con magnete in ottone con connessione universale da 22 mm, 2"

Separatore d'aria in ottone con connessione universale da 22 mm, 2"

Valvole di sfogo aria automatiche in ottone per impianti di riscaldamento e raffreddamento con connessione ½".

Ventilation components

Side mounted valve

Separatore d'aria in ottone con connessione orizzontale da 22 mm, 2"

Oil separator

Oil separator with silt storage

Grease and starch separator

Grease seperator with silt storage

Sandfilter for swimming pool

Prefilter for swimming pool

Grease trap

VSH XPress Stainless Gas fittings

VSH XPress Stainless fittings

VSH XPress Copper Gas fittings

VSH XPress Copper fittings

Alnor, Rectangular ventilation ducts and fittings

VSH XPress Carbon fittings

Aereco, Ventilation units

VSH SudoPress Stainless fittings

DEG ceiling modules

Convector accessories

Ascotherm Eco underfloor convectors

VSH SudoPress Copper fittings

Carbon fittings

Valves for VSH XPress

Pipes

Ventilation units with heat recovery

Ventilation system with heat recovery through exhaust air utilization

Demand‑controlled exhaust elements

Decentralized ventilation systems with heat recovery

System overlapping components green and blue

VSH SudoPress Copper Gas fittings

Water treatment for housing

Water treatment for industry

Fire protection