VAVB‑USD‑SLU BOX Links

Volumenstromregler PVSRR NW 100 mit Motor 24

Volumenstromregler PVSREJ mit Jalousieklappe

WASSER‑NACHHEIZREGISTER Type DH

USDD

PDD‑1/E with plenum box

LG1400‑LG3200 FILTER‑KLAPPE‑KOMPAKT

Brandschutzklappe EI90S BSK‑E‑L‑O2

Brandschutzklappe EI90S BSK‑E‑L‑S

Brandschutzklappe EI90S BSK‑E‑M‑O3

Schalldamper SD20

VAV‑USD‑SLU BOX Rechts

VKI

ODL7

Elektroheizregister CV für LG 740

Circular single/double wall system powered CAV regulator

Air‑to‑air VRF heat pump system

Air‑to‑air VRF heat pump system

Air‑to‑air VRF heat pump system

Air‑to‑air VRF heat pump system

One way cassette fan coil unit with low air intake grid and frontal air outlet grid

One way cassette fan coil unit with low air intake grid and frontal air outlet grid

KREUZ132

VAV with integrated silencer supply

VAV with integrated silencer extract/return

Recuperatore di calore, adatto per destra e sinistra

Circular single wall VAV

Rectangular single wall VAV

Rectangular double wall VAV with silencer

Circular double wall VAV

Rectangular double wall VAV

Circular double wall VAV with silencer

Pulse and extraction valve

Template

Sonair 3.0 & Sonair 3.0 CO2

Heat recovery ventilation unit – ceiling, wall, floor mounting. Remark: Flange for connected duct connection is standard available for OptiAir 260 with 160 mm and OptiAir 360 with 180 mm.

Recuperatore di calore con scambiatore entalpico

Generic Wall Vent Cover

Ceiling induction unit

Fan coil unit

Fan coil unit

Ventilatore ECO+

Water‑supplied suspended air heater

Water‑supplied suspended air heater

Water‑supplied suspended air heater

Induction ventilator

Silencer

CO2 Sensor wall‑mounted

Heat exchanger commercial series

Vertical Lossnay with Silencer Box P‑350SB‑E

Vertical Lossnay with Silencer Box P‑350SB‑E

Vertical Lossnay with Silencer Box P‑250SB‑E

Vertical Lossnay with Silencer Box P‑250SB‑E

Fan coil with painted metal casing

Fan coil with painted metal casing with radiant effect

Fan coil with painted metal casing

Built‑in fan coil without panelling

Floor system for heating, cooling and ventilation

Suspended electric air heater

The Mark Airstream HWX is an heat recovery unit equipped with rotary heat exchanger. There are 9 types available ranging in air volume from 1500 m3/h to 27500 m3/h for both indoor and outdoor installation. The following configurations are available: A1: Airstream HWX A2: Airstream HWX with after‑heater or cooler A3: Airstream HWX with after‑heater and cooler A4: Airstream HWX with damper(s) A5: Airstream HWX with damper(s), after‑heater or cooler A6: Airstream HWX with damper(s), after‑heater and cooler A7: Airstream HWX with outdoor‑ and recirculation damper A8: Airstream HWX with outdoor‑ and recirculation damper, after‑heater or cooler A9: Airstream HWX with outdoor‑ and recirculation damper, after‑heater and cooler

The Mark Airstream CFX is an heat recovery unit equipped with high‑efficiency counterflow heat exchanger with bypass. There are 12 types available ranging in air volume from 600 m3/h to 20.000 m3/h for both indoor and outdoor installation. The following configurations are available: A1: Airstream CFX A2: Airstream CFX with after‑heater or cooler A3: Airstream CFX with after‑heater and cooler A4: Airstream CFX with damper(s) A5: Airstream CFX with damper(s), after‑heater or cooler A6: Airstream CFX with damper(s), after‑heater and cooler

Fan coil unit

Fan coil unit

Fan coil unit

IVAR FCU‑Kit: Gruppo di bypass multifunzione preassemblato in ottone per impianti a fan‑coil, travi fredde, termostrisce e altri sistemi di climatizzazione a portata costante. Utilizzabile sia per riscaldamento che per raffrescamento. Composto da: una coppia di valvole a tre vie per l’impostazione di 5 diversi modi di funzionamento, un filtro a maglie, due rubinetti di carico/scarico, un orifizio Venturi con coppia di prese piezometriche e un regolatore di portata PICV. Range di pressioni differenziali ammissibili e campo di regolazione della portata (per la PICV): con cartuccia PICC 03 (cod. 590123) 16‑200 kPa, 37‑575 l/h; con cartuccia PICC 03 (cod. 590124) 30‑400 kPa, 64‑1110 l/h. Filtro a maglie (μ 500) in acciaio inox AISI 304. Connessioni al circuito primario (con bocchettoni): 1/2”F (DN 15), 3/4”F (DN 20). Connessioni al circuito secondario: 1/2”F (DN 15), 3/4”F (DN 20). Pressione massima di esercizio: 10 bar. Temperatura massima di esercizio: 120 °C. Disponibile con guscio di coibentazione in ARPRO 5135 FR di colore grigio con conducibilità 0, 037 W/mK, densità 50 kg/m3, reazione al fuoco in classe HF‑1 secondo standard UL‑94.

Gas‑fired high performance air heater with axial fan

Grille on Duct

Grille on Duct

Air Terminal Overflow Standard

Air Terminal Overflow Perforated

Motorised smoke shutter Kamouflage 1V MP

Fire damper CR60‑1S‑L500 BFL(T) motorised

Fire damper CR120‑1S ONE T motorised

Fire damper CR120‑1S MFUS automatical unlocking (fusible link)

Fire damper CR120‑1S‑L500 BFL(T) motorised

Smoke shutter Kamouflage 1V P for ceilings

Fire damper CR60‑1S‑L500 ONE T motorised

Fire damper CR120‑1S BFL(T) motorised

Smoke shutter Avantage 2V with two shutters

Fire damper CR60‑1S‑L500 MFUS automatical unlocking (fusible link)

Fire damper CR60‑1S BFL(T) motorised

Fire damper CR60‑1S ONE T motorised

Fire damper CR120‑1S‑L500 ONE T motorised

Smoke shutter Kamouflage 1V

Motorised smoke shutter Avantage 1V ME

Smoke shutter Avantage 1V

Fire damper CR120‑1S‑L500 MFUS automatical unlocking (fusible link)

Fire damper CR60‑1S MFUS automatical unlocking (fusible link)

Smoke shutter Kamouflage 2V with two shutters

The PRxMIOO is solely the perforated face from the PTxMI, and suitable for overflow.

The RRBD is the return version of, and is the same as the RTBD in appearance.

The RRBM and RRTB are the return versions of, and are the same as the RTBM and RTBT in appearance.

The RTBD is a flower‑shaped swirl diffuser, type: surface‑mounted. The swirl technology creates an extremely stable supply‑air pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room The smaller versions of the RTBD can be supplied as a poured concrete diffuser. Most important features:, Suitable for heat‑pump systems (VRV/ VRF) with extremely low supply‑air temperatures, Suitable for low rooms, Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

The RTFO is a conical swirl diffuser, type: surface‑mounted, which gives the diffuser a more open appearance. The diffuser is easy to fit by means of one central screw in the separately supplied plenum. The same diffuser is used for supply and return. Most important features:, Simple and quick assembly, Highly inductive, Suitable for heat‑pump systems (VRV/ VRF) with extremely low supply‑air temperatures A clamp ring can be supplied as an accessory that enables you to fit the diffuser quickly and easily, without any tools, into a flat ceiling plate. Swirl diffusers are extremely suitable for variable volume systems.

The RTBC is a surface‑mounted diffuser in round shape. The swirl technology creates an extremely stable inflow pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room Most important features:, Suitable for heat‑pump systems (VRV/ VRF) with extremely low supply‑air temperatures, Suitable for low rooms, Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

This is the same diffuser as the RTFO Supply, but has been made suitable for Revit return systems