Modular manifold hot water

ABS inspection pipe with oval access

Terminal fitting hot water

3-way nickel-plated manifold hot water

Derivation clamp for multilayer systems

Straight fitting with cap

Modular manifold cold water

Modular manifold with offset cold water

2-way manifold cold water

Elbow fitting with extension

3-way manifold hot water

Cross modular manifold cold water

Cross modular manifold hot water

Modular manifold for domestic cold water distribution

Modular manifold with cap hot water

Fitting with bend

Wingback elbow cold water

Wingback elbow cold water

2-way nickel-plated manifold cold water

Straight fitting with extension

Low wingback elbow cold water

Low wingback elbow hot water

Modular UPS for mid-high power

Wall Hung Boiler Commercial

Ecodan QUHZ heat pump system - outdoor unit

Unità interna canalizzata ultra sottile Dai il benvenuto a Revit e AutoCAD con l'app gratuita [a href="https://store.mepcontent.com/it/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Cascade solutions (Headers, Wall Mounted, In Line, Back to Back)

Indoor Unit Medium Static Pressure Type

Indoor Unit Floor Standing Concealed Type

Wall-mounted inverter heat pump

Lossnay Air Processing DX Unit

Heat Pump High Efficiency Y-Series

Indoor Unit Medium Static Pressure Type

Indoor Unit Medium Static Pressure Type

Indoor Unit Low Static Pressure Type

Hydro Unit

Branch piping set (2 PIPE) DIS-22-1G

Branch piping set (3 PIPE) DIS-371-2-RG

Branch piping set (2 PIPE) DIS-540-3

6 way Header

4 way Header

Water cooled Heat pump Series - FDC-KXZWE1 -VRF outdoor unit - Water cooled Series Heat Pump VRF from 22.4 kW to 100.0 kW in cooling - Compact design, Easy transportation and installation. - High efficiency (EER/COP), Energy saving Reduction of operation cost - Wide range of controls, central controls and BMS systems are available.

Refresh KX- Heat Pump VRF outdoor unit Refresh KX Heat Pump VRF outdoor unit 22.4 kW and 28.0 kW in cooling -Replacing a used unit with new one, applies to a wide range of pipe sizes (R22, R407C, R410A standard size). - These units can reuse existing piping Savings on replacement expenses such as scrapping waste material or procuring new pipe. -Possible to replace the existing unit with a new larger capacity unit. -Possible to replace plural systems with one system. For example: Existing 5HP x 2units can be replaced with a new 10HP x 1unit. -Wide range of controls, central controls and BMS systems are available.

Branch piping set (2 PIPE) DIS-371-1G

KXZE1 (Standard)- Heat Pump VRF outdoor unit Standard module VRF, 28 kW to 168 kW in cooling - High level of design flexibility, - High efficiency as well as enhanced operational functions: - Variable Temperature and capacity control (VTCC) - Peak cut control which can manage system energy control - Improved Scroll Compressor: the combination of the new multi discharge compressor port and the new concentrated - Wide Range of Operation: -20ºC in heating and up tp 46ºC in cooling. - Connect up to 80 indoor units for large models, with 130% by capacity - Wide range of controls, central controls and BMS systems are available.

Branch piping set (3 PIPE) DIS-371-2-RG

KX6 (Standard)- Heat Pump VRF outdoor unit Standard single module VRF, 61.5 to 68.0kW in cooling - The KX6 heat pump 2-pipe systems offer high performance VRF for applications that require either cooling only or heating only, ideal for open plan areas. - KX6 employs DC inverter compressors ONLY. - Connect up to 49 indoor units/up to 160% capacity. - High efficiency with COP (in cooling) up to 3.4. - Industry leading total piping length up to 1000m and a maximum pipe run of 160m. - Wide range of controls, central controls and BMS systems are available.

Micro KXZ- KXZME1- Heat Pump VRF outdoor unit - Heat Pump , Compact VRF outdoor unit, 22.4kW - 33.5kW in cooling - Compact design with small footprint for flexible installation (H1675 x W1080, D 480) - High efficiency with COP up to 4.0 - Easy and low cost installation by transportation in an elevator for six persons - Connect up to 22 indoor units, with 150% by capacity - Total piping length of 100m and a Maximum pipe run of 70m. - Wide range of controls, central controls and BMS systems are available.

8 way Header

8 way Header

KXZ Lite - KXZP - Heat Pump VRF outdoor unit Heat Pump KXZ-Lite VRF outdoor unit, 22.4 kW to 28.0 kW in cooling - Systems offer high performance VRF for applications that require either cooling only or heating only, ideal for open plan areas. - High efficiency as well as enhanced operational functions: - Variable Temperature and capacity control (VTCC). - Peak cut control which can manage system energy control. - Connect up to 8 indoor units, up to 120% capacity. - Wide range of controls, central controls and BMS systems are available.

Branch piping set (3 PIPE) DIS-22-1-RG

Branch piping set (3 PIPE) DIS-540-2-RG

Branch piping set (2 PIPE) DIS-180-1G

Branch piping set (3 PIPE) DIS-180-1-RG

KXZXE1 (HI-COP) Heat Pump VRF outdoor unit HiCOP single module VRF, 22.4 kW to 100 kW in cooling - Higher efficiency VRF - High efficiency as well as enhanced operational functions: - Variable Temperature and capacity control (VTCC) - Peak cut control which can manage system energy control - Improved Scroll Compressor: the combination of the new multi discharge compressor port and the new concentrated - Wide Range of Operation: -20ºC in heating and up to 46ºC in cooling. - Models (22.4kW-45.0kW) with 200% capacity connection, (50kW-100kW)with 160% capacity connection - Wide range of controls, central controls and BMS systems are available.

Fresh Air Assembly - SAF-DX SAF-DX is a heating or cooling coil incorporating MHI KXZ series controls. It can be used in combination with SAF - E6 series of total heat exchanger. - Return air temp. control or supply air temp. control can be selectable. - Optional drain pump is available.

Duct Connected-Low/Middle Static Pressure - Indoor Unit - Adjustable external static pressure by wired remote controller - Wide external static pressure: from 10 to 100 Pa. - Installation flexibility as thin design with 280mm height. - Standard built- in drain pump, - Transparent access hole to drain pan to check the drain pan without removing drain pan. - Reduced energy consumption by applying DC fan motor. - Reduction of sound pressure level down to 25dBA.

Floor Standing-(without casing)- Indoor Unit - Sutible for casing on site. - Ideal for installation beneath a window

Remote Controller RC-E5 - Easy to use functions and a clear LCD display. - Variety of functions are available weekly timer function - Extensive access to service and maintenance technical data

Pompa di calore Ecodan split

Termostato generico

Siphon complete

Flange circulation pump

Reinforcement adapter IBT BWA

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump outdoor unit

Heat pump indoor unit

Controllo centralizzato Dai il benvenuto a Revit e AutoCAD con l'app gratuita [a href="https://store.mepcontent.com/it/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Interfaccia BEMS Dai il benvenuto a Revit e AutoCAD con l'app gratuita [a href="https://store.mepcontent.com/it/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Controllo remoto Dai il benvenuto a Revit e AutoCAD con l'app gratuita [a href="https://store.mepcontent.com/it/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Pompa di calore Ecodan split

Unità interna a parete

Unità esterna pompa di calore

Unità esterna pompa di calore

BC controller

Pompa di calore inverter (3.3-7.2kW)

Unità interna canalizzata

Unità interna a cassetta 2 vie

Unità esterna pompa di calore Dai il benvenuto a Revit e AutoCAD con l'app gratuita [a href="https://store.mepcontent.com/it/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Unità esterna pompa di calore

Unità interna a parete

Distributore HBC Slave

Pompa di calore inverter (3.3-7.2kW)

Unità esterna pompa di calore

Unità interna canalizzata

Pompa di calore Ecodan packaged

Pompa di calore inverter (8.3-12.2kW)

Pompa di calore Ecodan packaged Dai il benvenuto a Revit e AutoCAD con l'app gratuita [a href="https://store.mepcontent.com/it/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Unità interna a parete Dai il benvenuto a Revit e AutoCAD con l'app gratuita [a href="https://store.mepcontent.com/it/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]