Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems. Min/max system pressure: +4 bar to +10 bar. PN16. Temp. Range: 0 – +70 °C. Allowed media: Water and deionisedwater Ethanol less than 30 vol%. BMS connectivity: Modbus RTU (RS485)

Expansion Vessel

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design, including Airvent

Purgeur d'air à purge latérale

Unité de circulation / unité de dérivation / groupe de pompes, préfabriquées et prêtes à l'emploi plug‑and‑play pour des applications telles que les systèmes de radiateurs, de ventilation et de chauffage par le sol Temp. plage : +5 – +110 °C, max. pression : 1, 0 Mpa.

Unité de circulation / unité de dérivation / groupe de pompes, préfabriquées et prêtes à l'emploi pour des applications telles que les systèmes de radiateurs, de ventilation et de chauffage par le sol, avec isolation thermique. Temp. plage : +5 – +110 °C, max. pression : 1, 0 Mpa.

Purgeur d'air automatique droit pour haute pression, raccord 1/2" F

Unité de circulation / unité de dérivation / groupe de pompes, préfabriqués et prêts à l'emploi plug‑and‑play pour les applications de refroidissement telles que les systèmes de ventilation et de refroidissement par le sol isolés avec AF/Armaflex AF‑2 en standard. Temp. Plage :, 20 – +80 °C, max. pression : 1, 0 Mpa.

Connection DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 10, 150 m3/h, fully insulated

Connection DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 10, 150 m3/h, NOT insulated

Dirt, Magnetite and Air Combi Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8, 7 …13, 9 M3], Brass, Swivel design

Dirt and Magnetite Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8, 7 …13, 4 M3], Brass, Swivel design

Air and Microbubble Separator with Cu22, Cu28, ¾" of 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design

Dirt and Magnetite Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, with insulation

Dirt and Magnetite Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, without insulated

Air and Microbubble Separator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, with insulation

Air and Microbubble Seperator with DN 50, DN 150 Flange PN 10, Max recommended flow rate Q 9, 2, 89, 8 m3/h, without insulated

Dirt and Magnetite Separator with ¾", 1", 1¼", 1½" or 2" connection PN10, Max Kv [13, 2 …73, 1 M3], Brass

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6, 3 …7, 5 M3], Brass, Swivel design

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems with automatic water‑refilling. Max/min system pressure: +0, 7, 5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water. Max system vol: 50 m3

Vacuum degasser for removal of dissolved gasses in cooling and freezing systems down to, 10C. Max/min system pressure: +0, 7, 5 bar, PN10. Temp. Range:, 10C, +70C. . Allowed media: Water, Glycol mix, saline solution, etc.

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems. Max/min system pressure: +0, 7, 5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water, Ethanol. Max system vol: 50 m3

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems. Max/min system pressure: +0, 7, 2, 5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water, Ethanol. Max system vol: 25 m3