Backflow protection unit TBE-STBA

Three-Way Valve

Ball Valve

Ball Valve

Purgeur d'air à purge latérale

Unité de circulation / unité de dérivation / groupe de pompes, préfabriquées et prêtes à l'emploi plug-and-play pour des applications telles que les systèmes de radiateurs, de ventilation et de chauffage par le sol Temp. plage : +5 – +110 °C, max. pression : 1,0 Mpa.

Unité de circulation / unité de dérivation / groupe de pompes, préfabriquées et prêtes à l'emploi pour des applications telles que les systèmes de radiateurs, de ventilation et de chauffage par le sol, avec isolation thermique. Temp. plage : +5 – +110 °C, max. pression : 1,0 Mpa.

Purgeur d'air automatique droit pour haute pression, raccord 1/2" F

Unité de circulation / unité de dérivation / groupe de pompes, préfabriqués et prêts à l'emploi plug-and-play pour les applications de refroidissement telles que les systèmes de ventilation et de refroidissement par le sol isolés avec AF/Armaflex AF-2 en standard. Temp. Plage : -20 – +80 °C, max. pression : 1,0 Mpa.

Kit de raccordement pour vases d'expansion SpiroExpand

Soupape à plein débit en acier inoxydable - presse x presse

Set de vanne à sphèree 90° B+R 1''x1'' avec thermomètre - nickelé (joint inclus)

Set de vanne à sphère B+R - nickelé (joint inclus) - 1''x1''

Set de vanne à sphère 90° B+R 1''x1'' - nickelé (joint inclus)

Bouches de soufflage en plastique

Bouche d'extraction en plastique

3 way valve (for anti-freezing or recirculation loop control)

Prescor IC Fill 15mm x 22mm - 8.0 Bar

Slanted seat valve, body without discharge screw

Slanted seat valve, body with discharge screw

Shutt-off valve, body without discharge screw

Shutt-off valve, body with discharge screw

LEGIOMIX® 2.0 - Mitigeur électronique hybride avec programme de désinfection

LEGIOMIX® - Mitigeur électronique à raccords filetés pour désinfection thermique

Vanne d’équilibrage manuelle

Brandschutzklappe EI90S BSK-R-M-M10

Brandschutzklappe EI90S BSK-R-L-M7

Brandschutzklappe EI90S BSK-E-M-S

Brandschutzklappe EI90S BSK-E-M-O3

Brandschutzklappe EI90S BSK-E-M-O2

Brandschutzklappe EI90S BSK-E-M-O1

Brandschutzklappe EI90S BSK-E-M-M12

Brandschutzklappe EI90S BSK-E-M-M1

Brandschutzklappe EI90S BSK-E-L-O3

Brandschutzklappe EI90S BSK-E-L-O2

Brandschutzklappe EI90S BSK-E-L-O1

Brandschutzklappe EI90S BSK-E-L-M11

Brandschutzklappe EI90S BSK-E-L-M9

Brandschutzklappe EI90S BSK-E-L-M7

Brandschutzklappe EI90S BSK-E-M-M9

Brandschutzklappe EI90S BSK-E-M-M10

Brandschutzklappe EI90S BSK-E-LR-S

Brandschutzklappe EI90S BSK-E-M-M8

Brandschutzklappe EI90S BSK-E-M-M7

Brandschutzklappe EI90S BSK-E-L-S

Mitsubishi Electric is a world leader in HVAC systems for residential, commercial and industrial use. Our efforts to make indoor life more comfortable began in 1921, with the introduction of an electric fan. It became an instant hit, and a little over 10 years later we started making coolers. The challenge of creating air-conditioning systems suitable to Japan's wide-ranging climate conditions led us to the development of amazingly sophisticated yet rugged machines and systems that can take the punishment of constant use in virtually any condition on earth. And do so quietly, energy-efficiently and with minimum negative impact on the environment. We offer a full Range of Air Conditioners, Ventilation, Air to Water Heat pumps and Chiller Solutions. Fresh and comfortable home and commercial environments with energy savings, high cost performance, and long product life with minimal maintenance. Regardless of building and room size, or the season, Mitsubishi Electric systems offer the flexibility and freedom to ensure a best-fit solution for any cooling and heating need. Air purification and deodorization features make indoor environments more pleasant, while sophisticated technologies like City Multi R2 VRF allow simultaneous cooling of one room while heating another. Our range of residential Ecodan Air to water heat pumps is complimented with Commercial range of Heat pumps and chillers. Simple to use controls allow on site control or remote control connectivity.

Balancing valve for the hydraulic balancing of distribution lines in central heating and cooling systems with closed circuits. Flow determination by differential pressure measurement taking into account the preset values, e.g. with the OV-DMC3 measuring system. Installation in flow or return. In an angled version with continuously controllable, infinitely fine presetting using a non-rising handwheel. Presetting is reproducible, lockable and sealable as standard. All functional elements on the handwheel side. Equipped with two measuring, draining and filling valves as standard. Valve housing and parts in contact with the medium made of dezincification-resistant brass, EPDM or PTFE. Maintenance-free, double spindle seal. Female thread on both sides according to EN 10226

Dynamic thermostatic valve AQH PN10 DN15 straight 35-420l

Dynamic thermostatic valve AQH PN10 DN15 axial 35-420l

Dynamic thermostatic valve AQH PN10 DN15 angle 35-420l

Mitigeur thermostatique, réglable protégée, avec clapets anti-retour et filtres

Robinet thermostatisable pour installations monotube, transformable pour installations bitube. Pour tube cuivre, plastique simple et multicouche

Groupe de remplissage automatique - faible adhérence du calcaire

BALLSTOP - Vanne à sphère avec clapet anti-retour, pour installation de chauffage

Disconnecteur à zone de pression réduite contrôlable. Type BA

Soupape de sécurité

Pipes and fittings for the Rubbinetterie Bresciane Bonomi S.p.A. TURBO INOX range.

Pipes and fittings for the Rubbinetterie Bresciane Bonomi S.p.A. TURBO STEEL range.

Pipes and fittings for the Rubbinetterie Bresciane Bonomi S.p.A. TURBO INOX GAS range.

Automatic thermostatic valve straight AQ without filter

Automatic thermostatic valve reversed angle AQ without filter

Automatic thermostatic valve angle AQ without filter

Automatic thermostatic valve straight AQ with filter

Automatic thermostatic valve reversed angle AQ with filter

Automatic thermostatic valve angle AQ with filter

Pipes and fittings for the Rubbinetterie Bresciane Bonomi S.p.A. TURBO PRESS range.

Pipes and fittings for the Rubbinetterie Bresciane Bonomi S.p.A. TURBO PRESS GAS range.

Three-way diverting and mixing valve

Bronze piston type spring assisted check valve

Robinet d'arrêt de carburant

Thermostatische regelaar voor recirculatieleidingen van sanitair warm water

Entonnoir de vidange avec coude

Separate (2x) Zone valves ø160mm RF controlled for the HRC-EcoSmart/Comfort including adapter

Plastic extract valve suitable for ø100 / ø125mm. The maximum air volume is 75 m3/h

IVAR RTV: thermostatic valve for controlling the water temperature in the recirculation branches. Balancing thermostatic insert with fixed point adjustment settable with graduated knob equipped with locking mechanism. Version A with only recirculation branch balancing. Version B with thermostatic control for thermal disinfection cycle. Version C with electronic thermal disinfection cycle. Connections: 1/2" F or 3/4" F. Adjustment range 35-60 °C. ΔP maximum at the ends of the valve 1 bar. Main material: brass CW617N. Adjustment knob: ABS. O-ring seal: peroxide EPDM.

6-way ball valve G3/4

6-way ball valve G3/4

Electromotive rotary actuator “Aktor R ST L”, 24 V, steady control 0-10 V, or 0-24 V as 2 point control

Sprinkler concealed cup with fixation

B2KL 6-way ball valve

AEROTUBE DD 110: Passive ventilator for air supply or extraction

AEROTUBE AZ smart: Can be used as an air supply or air extraction unit

Stopvalve with press ends

Non-return valve

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 00 (female) connections: G 1/2"F, G 3/4"F, G 1"F in compliance with ISO 228/1. PICV 05 (male - flat seal) connections: G 3/4"M, EUROK, G 1"M, G 1"1/4M in compliance with ISO 228/1. PICV 10 (with unions) connections: G 1/2"M, G 3/4"M, G 1"M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 01, PICC 02 or PICC 03 cartridges. PICC connection: M32x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 03: 6 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 01: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 02: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 03: 41 flow rate ranges to set even during operation; to combine with IVAR TE 3003 electrothermal actuator (M30x1.5; ON/OFF 230 V AC or ON/OFF 24 V AC or proportional 0-10 V 24 V AC adjustment) or IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0-10 V 24 V AC adjustment); max closing pressure 6 bar; brass and PSU/POM/PPS (glass-fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 200 (female) connections: G 1"1/2F, G 2"F in compliance with ISO 228/1. PICV 205 (male - flat seal) connections: G 2"M, G 2"1/2M in compliance with ISO 228/1. PICV 210 (with unions) connections: G 1"1/2M, G 2"M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 22 cartridge. PICC connection: W81x16. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 22: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 100 (female) connections: G 1"F, G 1"1/4F in compliance with ISO 228/1. PICV 105 (male - flat seal) connections: G 1"M, G 1"1/4M, G 1"1/2M in compliance with ISO 228/1. PICV 110 (with unions) connections: G 3/4"M, G 1"M, G 1"1/4M in compliance with ISO 228/1 and EN 10226-1. To combine with PICC 11, PICC 12 or PICC 13 cartridges. PICC connection: M54x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature: -20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 13: 4 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 11: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 12: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 13: 41 flow rate ranges to set even during operation; to combine with IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0-10 V 24 V AC adjustment); max closing pressure 4 bar; brass and PSU/POM/PPS (glass-fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Unspecified Valve

Inlet Combination

Dry valve

Suction diffuser series 731-D with PN10/PN16 flange

Low pressure actuator

Electric -pneumatic actuators

Alarm Check Valve

Double pneumatic actuators

Firelock alarm check valve