Cable shafts

Centrales simple flux

Centrales doubles flux

Bouches et diffuseurs

Fire

Ventilateurs et caissons d'extraction

Drainage de toit plat

Unions entre systèmes

Tuyaux de drainage en composite GM‑X

Tuyaux de drainage GM‑X

Drainage de parking

Drainage de balcon/terrasse

Drainage de salle de bain

BlauPlast

Composants intersystèmes

Galva standard

Galva avec joints

Aluminium standard

Réseaux double peau

Diffusion d`air

Chaudières collectives

ECS collective

Ventilation & traitement de l’air

Pressure reducing valves are devices which, when installed on water systems, reduce and stabilize the pressure of the water entering from the water supply main. This pressure, in general, is too high and variable for domestic systems to operate correctly. The 535H series pressure reducing valves, ideal for residential and commercial applications, feature a dial indicator with direct readout allowing easy pressure pre‑adjustment. After installation, the valve will control at the pre‑adjusted pressure setting. The valve is constructed of DZR low‑lead forged brass and incorporates a unique noise reducing and high flow seat design, is easily serviced with a replaceable cartridge and has an integral stainless steel filter (35 mesh), suitable for water systems that may contain sediment and debris. The valve is ICC‑ES certified to ASSE 1003, CSA B356, NSF/ANSI/CAN 61 (180°F/82°C Commercial Hot), NSF 372, low lead laws and listed by ICC‑ES. It meets codes IPC, IRC, UPC and NPC for use in accordance with the US and Canadian plumbing codes. Plenum rated: compliant with the requirements of standard UL 2043, without the outdoor protective cover.

Dynamic thermostatic valve AQH PN10 DN15 straight 35‑420l

Dynamic thermostatic valve AQH PN10 DN15 axial 35‑420l

Dynamic thermostatic valve AQH PN10 DN15 angle 35‑420l

High flow and quiet pressure control, The Caleffi PresCal™ 535H pressure reducing valve is precision engineered to deliver accurate pressure regulation under varying pressure and draw conditions. Low internal pressure losses produce superior falloff performance enabling more flow capacity to fixtures. NSF/ANSI/CAN 61 compliance, superior 180°F temperature rating, anti‑scale components and convenient cartridge design add to the many features of this versatile and dependable PRV. UV Outdoor protective cover included for non‑freezing outdoor installations.Pressure reducing valves are devices which, when installed on water systems, reduce and stabilize the pressure of the water entering from the water supply main. This pressure, in general, is too high and variable for domestic systems to operate correctly.The 535H series pressure reducing valves, ideal for residential and commercial applications, feature a dial indicator with direct readout allowing easy pressure pre‑adjustment. After installation, the valve will control at the pre‑adjusted pressure setting.The valve is constructed of DZR low‑lead forged brass and incorporates a unique noise reducing and high flow seat design, is easily serviced with a replaceable cartridge and has an integral stainless steel filter (35 mesh), suitable for water systems that may contain sediment and debris.The valve is ICC‑ES certified to ASSE 1003, CSA B356, NSF/ANSI/CAN 61 (180°F/82°C Commercial Hot), NSF 372, low lead laws and listed by ICC‑ES. It meets codes IPC, IRC, UPC and NPC for use in accordance with the US and Canadian plumbing codes. Plenum rated: compliant with the requirements of standard UL 2043, without the outdoor protective cover.

Automatic thermostatic valve straight AQ without filter

Automatic thermostatic valve reversed angle AQ without filter

Automatic thermostatic valve angle AQ without filter

Automatic thermostatic valve straight AQ with filter

Automatic thermostatic valve reversed angle AQ with filter

Automatic thermostatic valve angle AQ with filter

IVAR RTV: thermostatic valve for controlling the water temperature in the recirculation branches. Balancing thermostatic insert with fixed point adjustment settable with graduated knob equipped with locking mechanism. Version A with only recirculation branch balancing. Version B with thermostatic control for thermal disinfection cycle. Version C with electronic thermal disinfection cycle. Connections: 1/2" F or 3/4" F. Adjustment range 35‑60 °C. ΔP maximum at the ends of the valve 1 bar. Main material: brass CW617N. Adjustment knob: ABS. O‑ring seal: peroxide EPDM.

Composants de ventilation

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 00 (female) connections: G 1/2"F, G 3/4"F, G 1"F in compliance with ISO 228/1. PICV 05 (male, flat seal) connections: G 3/4"M, EUROK, G 1"M, G 1"1/4M in compliance with ISO 228/1. PICV 10 (with unions) connections: G 1/2"M, G 3/4"M, G 1"M in compliance with ISO 228/1 and EN 10226‑1. To combine with PICC 01, PICC 02 or PICC 03 cartridges. PICC connection: M32x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature:, 20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 03: 6 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 01: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 02: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 03: 41 flow rate ranges to set even during operation; to combine with IVAR TE 3003 electrothermal actuator (M30x1.5; ON/OFF 230 V AC or ON/OFF 24 V AC or proportional 0‑10 V 24 V AC adjustment) or IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0‑10 V 24 V AC adjustment); max closing pressure 6 bar; brass and PSU/POM/PPS (glass‑fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 200 (female) connections: G 1"1/2F, G 2"F in compliance with ISO 228/1. PICV 205 (male, flat seal) connections: G 2"M, G 2"1/2M in compliance with ISO 228/1. PICV 210 (with unions) connections: G 1"1/2M, G 2"M in compliance with ISO 228/1 and EN 10226‑1. To combine with PICC 22 cartridge. PICC connection: W81x16. Compatible with water or glycol solutions max 30%. Min operating temperature:, 20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 22: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Valve that keeps the flow rate constant during operation within a certain differential pressure range thanks to a membrane device with a contrast spring. Complete with two pockets G 1/4"F for piezometric sockets (IVAR AVB 10) and with plugs for piezometric sockets and cartridge. PICV 100 (female) connections: G 1"F, G 1"1/4F in compliance with ISO 228/1. PICV 105 (male, flat seal) connections: G 1"M, G 1"1/4M, G 1"1/2M in compliance with ISO 228/1. PICV 110 (with unions) connections: G 3/4"M, G 1"M, G 1"1/4M in compliance with ISO 228/1 and EN 10226‑1. To combine with PICC 11, PICC 12 or PICC 13 cartridges. PICC connection: M54x1.5. Compatible with water or glycol solutions max 30%. Min operating temperature:, 20 °C. Max operating temperature: 120 °C. Max operating pressure: 25 bar. Max closing pressure with PICC 13: 4 bar. Valve material: CW617N brass. Sealing gaskets material: Peroxide EPDM. IVAR PICC 11: 8 flow rate ranges to set; brass and POM insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 12: 41 flow rate ranges to set even during operation; brass and PSU insert; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets. IVAR PICC 13: 41 flow rate ranges to set even during operation; to combine with IVAR RV 03 axial motor (M30x1.5; 2 points/3 points 230 V AC or 2 points/3 points 24 V AC or proportional 0‑10 V 24 V AC adjustment); max closing pressure 4 bar; brass and PSU/POM/PPS (glass‑fibre reinforced) insert; stainless steel internal metal components; PPS/Peroxide EPDM cone; HNBR/Peroxide EPDM diaphragm; Peroxide EPDM sealing gaskets.

Reverse thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with female connection. Connection to iron pipe x Connection to radiator: G 3/8"F x G 3/8"M with or without O‑ring, G 1/2"F x G 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Angle thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with female connection. Connection to iron pipe x Connection to radiator: 3/8"F x 3/8"M with or without O‑ring, 1/2"F x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Straight thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Reverse thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Straight thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with female connection. Connection to iron pipe x Connection to radiator: 3/8"F x 3/8"M with or without O‑ring, 1/2"F x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Co‑axial left/right thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with female connection. Connection to iron pipe x Connection to radiator: 3/8"F x 3/8"M with or without O‑ring, 1/2"F x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Co‑axial left/right thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Angle thermostatic valve with flow rate pre‑regulation and pressure dynamic balancing, HARMONIA‑series, with male connection. Connection to iron pipe x Connection to radiator: EUROK x 1/2"M with or without O‑ring. Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol‑water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Differential pressure range: 0.1÷0.6 bar. Body material: nickel‑plated CW617N brass. Gaskets and O‑rings materials: Peroxide EPDM. Spring, washer and spindle material: Stainless steel. Protective cap: orange ABS.

Vanne 2 voies motorisée 230 V retour position zéro automatique

Robinet thermostatique de radiateur

Robinet thermostatique de radiateur

Robinet thermostatique de radiateur

Robinet thermostatique de radiateur

Robinet thermostatique de radiateur

Robinet thermostatique de radiateur

VSH XPress Stainless Gas fittings

VSH XPress Stainless fittings

VSH XPress Copper Gas fittings

VSH XPress Copper fittings

Alnor, Rectangular ventilation ducts and fittings

VSH XPress Carbon fittings

Unités de ventilation

VSH SudoPress Stainless fittings

DEG ceiling modules

Convector accessories

Ascotherm Eco underfloor convectors

VSH SudoPress Copper fittings

Carbon fittings

Valves for VSH XPress

Tuyaux

Unités de ventilation avec récupération de chaleur

Système de ventilation avec récupération de chaleur par utilisation de l'air d'extraction

Éléments d'extraction contrôlés par la demande

Systèmes de ventilation décentralisés avec récupération de chaleur

Composants communs aux systèmes green et blue

VSH SudoPress Copper Gas fittings

Traitement de l'eau pour l'habitat

Traitement de l'eau pour l'industrie

Protection incendie

Passage d'air de composant externe

Système de tuyauterie red

Robinets à soupape d'arrét

Système de tuyauterie green

Système de tuyauterie energy green

Système de tuyauterie energy blue

Système de tuyauterie Blue

Filtres

Clapets anti‑retour

Vannes papillon

Protection incendie

Strangregulierventile

Diffusion

PVC‑U fitting system

Aignep raccords

Raccords à souder acier