Contenu BIM pour vos projets MEP

Bienvenue dans la plus grande bibliothèque BIM pour les ingénieurs MEP. Téléchargez les fichiers BIM spécifiques aux fabricants, qui est prêt à être utilisé dans votre processus. En collaboration étroite avec tous les fabricants reconnus, MEPcontent vous offre des familles Revit MEP, des Revit Apps, des fichiers AutoCAD et des fichiers IFC. Commencez dès aujourd'hui, créez votre compte gratuit.

 

Sélection d'applis


Productivity Tools

Productivity Tools

Connecting and rotating Revit families in MEP systems just got much easier!

Appli pour Revit

Productivity Tools

Connecting and rotating Revit families in MEP systems just got much easier!
Productivity Tools
Obtenir l'application
Product Line Placer for Valves

Product Line Placer for Valves

Place valves in Revit from leading manufacturers without leaving your project!

Appli pour Revit

Product Line Placer for Valves

Place valves in Revit from leading manufacturers without leaving your project!
Product Line Placer for Valves
Obtenir l'application
JUNG Switch Range Configurator

JUNG Switch Range Configurator

Design, manage and configure complete sets of JUNG switch ranges in both 2D and 3D!

Appli pour Revit

JUNG Switch Range Configurator

Design, manage and configure complete sets of JUNG switch ranges in both 2D and 3D!
JUNG Switch Range Configurator
Obtenir l'application
Valsir Product Line Placer

Valsir Product Line Placer

Draw Valsir supply and waste systems twice as fast with reliable and localized content!

Appli pour Revit

Valsir Product Line Placer

Draw Valsir supply and waste systems twice as fast with reliable and localized content!
Valsir Product Line Placer
Obtenir l'application
Réservations pour MEP

Openings for MEP

Generate openings on places where MEP elements are clashing with structural elements

Appli pour Revit

Réservations pour MEP

Generate openings on places where MEP elements are clashing with structural elements
Réservations pour MEP
Obtenir l'application

Parcourez, concevez et calculez avec nos applications pour Revit et AutoCAD

Actualités


Volets coupe-fumée des séries Kamouflage et Avantage de Rf-Technologies

Volets coupe-fumée des séries Kamouflage et Avantage de Rf-Technologies

26 February 2020

Nouvellement disponibles sur MEPcontent: Fichiers BIM pour les volets anti- fumée Kamouflage et Avantage de Rf- Technologies. Les volets anti- fumée de la série Kamouflage ont une finition esthétique ainsi qu'une grande étanchéité à l'air et une isolation thermique et acoustique. Son panneau en placoplâtre remplace la grille de finition et permet d'appliquer une finition décorative assortie à la finition du mur adjacent. Le volet offre une résistance au feu de 60 ou 120 minutes, et assure une perte de pression minimale. Les volets anti- fumée de la série Avantage sont réputés pour leurs propriétés d'étanchéité à l'air supérieures. Le volet offre une résistance au feu de 60 ou 120 minutes, et assure une perte de pression minimale. Le nouveau contenu est disponible au format de fichier Revit . RFA sur la page des fichiers BIM de Rf- Technologies. Les séries sont également disponibles dans la fiche de la ligne de produits de Rf- technologies dans Stabicad pour Revit et AutoCAD. Télécharger le nouveau contenu

Nouveau contenu dans la bibliothèque BIM de l'IVAR!

Nouveau contenu dans la bibliothèque BIM de l'IVAR!

25 February 2020

Pour le fabricant IVAR, une grande quantité de nouveaux contenus Revit est ajoutée à la bibliothèque BIM. Le VARIMIX, TECHNONMIX, COMBIMIX, MULTIMIX, UNIMIX / UNIMIX- C, POLIFEMO / POLIFEMO PLUS, Dirtstop / Dirtstop XL, le kit de ventilo- convecteurs, les collecteurs modulaires EASY- RADIANT et EASY- LOCK et le module de comptage EQCP1 Equicompact sont maintenant disponibles au format de fichier Revit. Télécharger le nouveau contenu

New: ENERGION M files from ATAG

New: ENERGION M files from ATAG

21 January 2020

Download ATAG new content

Ingénieurs MEP

97 991

Téléchargements mensuels

90 555

Articles

614 682

Fabricants

333

Articles récents


Valsir Valsir Product Line Placer

Valsir Product Line Placer

With the Valsir Product Line Placer for Revit it is very easy to draw Valsir supply and waste systems twice as fast with up-to-date and localized Valsir content. You can download the app for free from [a href="https://store.mepcontent.com/Product/Details/71" target="_blank"]our store[/a].

Valsir

Valsir Product Line Placer

With the Valsir Product Line Placer for Revit it is very easy to draw Valsir supply and waste systems twice as fast with up-to-date and localized Valsir content. You can download the app for free from our store.

Conforme à EMCS

.PDF

Apps

Valsir

Télécharger
Mitsubishi Electric Mitsubishi Electric System Designer

Mitsubishi Electric System Designer

Find quickly Mitsubishi Electric content and place it directly in Revit or Autocad with this free App. The Mitsubishi Electric System Designer App for Revit and AutoCAD is a powerful tool allowing you to find the right Mitsubishi Electric Revit families and CAD files for heating and cooling units that you need. Filter the Mitsubishi Electric HVAC units on technical properties or search on article number, description, model or series and use your desired air conditioners in your BIM projects instantly. The following product series are available in the app: City Multi, Ecodan, E-series, Lossnay, M Series, Mr. Slim. Download the free app now! You can download the app for free from [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]our store[/a].

Mitsubishi Electric

Mitsubishi Electric System Designer

Find quickly Mitsubishi Electric content and place it directly in Revit or Autocad with this free App.

The Mitsubishi Electric System Designer App for Revit and AutoCAD is a powerful tool allowing you to find the right Mitsubishi Electric Revit families and CAD files for heating and cooling units that you need. Filter the Mitsubishi Electric HVAC units on technical properties or search on article number, description, model or series and use your desired air conditioners in your BIM projects instantly. The following product series are available in the app: City Multi, Ecodan, E-series, Lossnay, M Series, Mr. Slim. Download the free app now!

You can download the app for free from our store.

Conforme à EMCS

.PDF

Apps

Mitsubishi Electric

Télécharger
IVAR COMBIMIX

COMBIMIX

Mixing and boosting unit IVAR COMBIMIX for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), two shut-off ball valves for the pump, two fill/drain valves, two automatic air vent valves, three thermometers 0÷80 °C (on delivery and return of boiler circuit and on delivery of mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut-off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M with swivelling nipples (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T5011 included (max differential pressure at mixing valve ends 250 mbar) or set up for outside compensated temperature mixing by integrating axial servomotor IVAR RV 01 or thermoelectric actuator IVAR TE 3061. Differential bypass valve (optional) 0.2÷0.6 bar with half-hard nickel-plated pipe. Pump space 130 mm or 180 mm, G 1”1/2F flat seal connections. Equipped with variable-speed electronic pump WILO4F or variable-speed electronic pump WILO4F-180 or without pump. Accessories: high-temperature kit with pair of manifolds 1” x EUROK with shut-off and lockshield valves CEP/02 I – CEP/03 I (2 ways) – (3 ways), high-temperature kit with pair of simple manifolds 1” x EUROK CEP/02 – CEP/03 (2 ways) – (3 ways), insulation shell ACM 01, threaded spacer for pumps AC 633.

IVAR

COMBIMIX

Mixing and boosting unit IVAR COMBIMIX for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), two shut-off ball valves for the pump, two fill/drain valves, two automatic air vent valves, three thermometers 0÷80 °C (on delivery and return of boiler circuit and on delivery of mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut-off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M with swivelling nipples (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T5011 included (max differential pressure at mixing valve ends 250 mbar) or set up for outside compensated temperature mixing by integrating axial servomotor IVAR RV 01 or thermoelectric actuator IVAR TE 3061. Differential bypass valve (optional) 0.2÷0.6 bar with half-hard nickel-plated pipe. Pump space 130 mm or 180 mm, G 1”1/2F flat seal connections. Equipped with variable-speed electronic pump WILO4F or variable-speed electronic pump WILO4F-180 or without pump. Accessories: high-temperature kit with pair of manifolds 1” x EUROK with shut-off and lockshield valves CEP/02 I – CEP/03 I (2 ways) – (3 ways), high-temperature kit with pair of simple manifolds 1” x EUROK CEP/02 – CEP/03 (2 ways) – (3 ways), insulation shell ACM 01, threaded spacer for pumps AC 633.

Conforme à EMCS

.RVT .RFA

Distributeur pour chauf/clim

IVAR

Télécharger
IVAR TECHNOMIX

TECHNOMIX

IVAR TECHNO TNB cod. 508100: mixing and boosting unit for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), fill/drain valve, manual air vent valve, two thermometers 0÷80 °C (on delivery of boiler circuit and mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T3011 included. Max differential pressure at mixing valve ends 250 mbar. Pump space 130 mm with G 1”1/2F flat seal connections.

IVAR

TECHNOMIX

IVAR TECHNO TNB cod. 508100: mixing and boosting unit for radiant installations complete with two-way mixing valve, balancing valve (on the cold way), fill/drain valve, manual air vent valve, two thermometers 0÷80 °C (on delivery of boiler circuit and mixed circuit), temperature sensor pocket (on delivery of mixed circuit), shut off valve (on return of boiler circuit), boiler circuit connections G 1”F (centre distance 200 mm) and mixed circuit connections G 1”M (centre distance 200 mm). Upper and lower parts made of nickel-plated CB753S brass; pipe made of nickel-plated half-hard copper; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Fixed point mixing 20÷60 °C by thermostatic control head with remote sensor T3011 included. Max differential pressure at mixing valve ends 250 mbar. Pump space 130 mm with G 1”1/2F flat seal connections.

Conforme à EMCS

.RVT .RFA

Distributeur pour chauf/clim

IVAR

Télécharger
IVAR MULTIMIX

MULTIMIX

Distribution and mixing system IVAR MULTIMIX for thermal power stations, modular with: - Manifold made of CB753S brass from casting with adjustable and interceptable hydraulic separator integrated. Complete with union with swivel fittings G 1” for the connection to distribution kits, shut-off ball valves DN 25 at the inlets, thermomanometer 0-6 bar/0-120 ◦C and automatic air vent valve. 2-way or 3-way versions available. Possibility of connection to the primary circuit from above, below, right or left. Expandable by connecting to other manifolds with swivel nipples G 1”. Other components made of CW617N brass. Gaskets and o-rings made of Peroxide-cured EPDM. Connections to the primary circuit G 1”F, centre distance delivery/return 52 mm (inlet from the side), 197 mm (inlet from above or below, 2-way manifold), 170 mm (inlet from above or below, 3-way manifold); connections to the distribution circuits with swivel nut G 1”F, centre distance delivery/return 45 mm. Max operating temperature 120 ◦C. Max operating pressure 10 bar. Max primary circuit flow rate 3500 l/h. - High-temperature direct flow kit complete with telescopic system for pump connection, shut-off ball valves for pump connection, delivery and return thermometers 0÷80 ◦C; check valve. Primary circuit connections G 1” M, delivery/return centre distance 45 mm; distribution circuits connections G 3/4”F, delivery/return centre distance 90 mm. Parts from casting: CB753S brass. Other parts made of CW617N brass. Gaskets and o-rings: peroxide-cured EPDM. Max operating temperature (pump excluded) 120 ◦C. Max operating pressure 10 bar. - Low temperature mixing kit complete with 3-way mixing valve with headwork for thermostatic or motorisable control, secondary bypass with micrometric dually adjusted lockshields and position memory, telescopic system for pump connection, shut-off ball valves for pump connection, delivery and return thermometers 0÷80 ◦C, check valve, fixed setting safety thermostat 60◦C. Primary circuit connections (manifold-separator) G 1”M, centre distance delivery/return 45 mm; heating circuits connections G 3/4”F, centre distance delivery/return 90 mm. Parts from casting: CB753S brass. Other parts: CW617N brass. Gaskets and o-rings: peroxide-cured EPDM. Max operating temperature (pump excluded) 120 ◦C. Max operating pressure 10 bar. - Variable-speed electronic pump WILO4F centre distance 130 mm. - 3-speed standard pump WILO3F centre distance 130 mm. - Polypropylene insulation shell. - Wall fitted cabinet with variable height and depth. - T 5011 U: thermostatic head with incorporated control and immersion remote sensor. Connection: M30 x 1.5. Probe holder connection: 1/2". Range: 30-55 °C. Cable lenght: 2 m. - RV 01: axial motor. Connection: M30 x 1.5. 3-point adjustment 230 V AC or 24 V AC or proportional 0-10 V 24 V AC.

IVAR

MULTIMIX

Distribution and mixing system IVAR MULTIMIX for thermal power stations, modular with: - Manifold made of CB753S brass from casting with adjustable and interceptable hydraulic separator integrated. Complete with union with swivel fittings G 1” for the connection to distribution kits, shut-off ball valves DN 25 at the inlets, thermomanometer 0-6 bar/0-120 ◦C and automatic air vent valve. 2-way or 3-way versions available. Possibility of connection to the primary circuit from above, below, right or left. Expandable by connecting to other manifolds with swivel nipples G 1”. Other components made of CW617N brass. Gaskets and o-rings made of Peroxide-cured EPDM. Connections to the primary circuit G 1”F, centre distance delivery/return 52 mm (inlet from the side), 197 mm (inlet from above or below, 2-way manifold), 170 mm (inlet from above or below, 3-way manifold); connections to the distribution circuits with swivel nut G 1”F, centre distance delivery/return 45 mm. Max operating temperature 120 ◦C. Max operating pressure 10 bar. Max primary circuit flow rate 3500 l/h. - High-temperature direct flow kit complete with telescopic system for pump connection, shut-off ball valves for pump connection, delivery and return thermometers 0÷80 ◦C; check valve. Primary circuit connections G 1” M, delivery/return centre distance 45 mm; distribution circuits connections G 3/4”F, delivery/return centre distance 90 mm. Parts from casting: CB753S brass. Other parts made of CW617N brass. Gaskets and o-rings: peroxide-cured EPDM. Max operating temperature (pump excluded) 120 ◦C. Max operating pressure 10 bar. - Low temperature mixing kit complete with 3-way mixing valve with headwork for thermostatic or motorisable control, secondary bypass with micrometric dually adjusted lockshields and position memory, telescopic system for pump connection, shut-off ball valves for pump connection, delivery and return thermometers 0÷80 ◦C, check valve, fixed setting safety thermostat 60◦C. Primary circuit connections (manifold-separator) G 1”M, centre distance delivery/return 45 mm; heating circuits connections G 3/4”F, centre distance delivery/return 90 mm. Parts from casting: CB753S brass. Other parts: CW617N brass. Gaskets and o-rings: peroxide-cured EPDM. Max operating temperature (pump excluded) 120 ◦C. Max operating pressure 10 bar. - Variable-speed electronic pump WILO4F centre distance 130 mm. - 3-speed standard pump WILO3F centre distance 130 mm. - Polypropylene insulation shell. - Wall fitted cabinet with variable height and depth. - T 5011 U: thermostatic head with incorporated control and immersion remote sensor. Connection: M30 x 1.5. Probe holder connection: 1/2". Range: 30-55 °C. Cable lenght: 2 m. - RV 01: axial motor. Connection: M30 x 1.5. 3-point adjustment 230 V AC or 24 V AC or proportional 0-10 V 24 V AC.

Conforme à EMCS

.RVT .RFA

Distributeur pour chauf/clim

IVAR

Télécharger