Corner tee with wall flange

Wall plate elbow 90° with female thread

Wall plate elbow 90° with female thread

Colectați piesa T DN 110

Silent-Pro combined corner branch fitting 87.5°, swept-entry, right

Silent-Pro combined corner branch fitting 87.5°, swept-entry, left

Silent-Pro duct branch fitting 87.5°, swept-entry, right

Silent-Pro duct branch fitting 87.5°, swept-entry, left

Silent-Pro parallel branch fitting 45°

Silent-Pro combined branch fitting 87.5°, swept-entry

Silent-PP combined corner branch fitting 87.5°, swept-entry, right

Silent-PP combined corner branch fitting 87.5°, swept-entry, left

Silent-PP duct branch fitting 87.5°, swept-entry, right

Silent-PP duct branch fitting 87.5°, swept-entry, left

Silent-PP parallel branch fitting 45°

Silent-PP combined branch fitting 87.5°, swept-entry

90° 3-way ball branch

Cup Ø 50 mm, universal valve, valve sealing plug, flat seal for valve top, adjustment tube 100 mm, drain tube 200 mm

90° 4-way ball branch

135° 3-way ball branch

Wall union passage, female

Wall union, female

Double wall union, female, two outlets

POLO-KAL 3S Pro

The Caleffi TankMixer™ is a perfect mixing valve solution to maximize the capacity of modern high efficiency water heaters and minimize installation time. It comes packaged in a kit with everything needed for fast installation including union fittings and industry-exclusive press connections The TankMixer™520_AX series kit combines a three-way thermostatic mixing valve with a cold water cross and flexible pipe for easy installation directly on a typical gas-fired w ater h eater a nd o ther water heaters that now comply with the National Appliance Energy Conservation Act (NAECA). The TankMixer™ maintains the desired output temperature of the mixed water supplied at a constant set value compensating for both temperature and pressure fluctuations o f t he incoming hot and cold water. The mixing valve hot inlet port closes tight to prevent temperature creep in recirculation applications. Also available as body only, for a wide variety of separately-sourced end connections, the angle style body design offers improved fluid dynamics f or better performance and reduces installation labor and materials, eliminating a piping elbow in typical installations. The valve ICC-ES certified to ASSE 1017 and CSA B125.3. It complies with codes IPC, IRC, NPC and UPC for use in accordance with the US and Canadian plumbing codes, and standard NSF/ANSI 372, low lead, as certified by ICC-ES.

The LEGIOMIX® electronic mixing valve provides precise temperature control over very low and very high flow rate demand, minimal pressure drop with a ball valve control element, automatic self-cleaning to prevent scale formation and easy-to-use digital interface with data logging, alarming and status indication. The LEGIOMIX electronic mixing valve is furnished with a controller with LCD user interface that provides a set of programs for circuit thermal disinfection to kill Legionella. The controller is configurable via keypad, or local or remote computer. Depending on the type of system and habits of the user, temperature levels and operation times can be programmed as desired. In addition, it comes standard with monitoring and remote control connections.The LEGIOMIX Station is pre-piped with LEGIOMIX 3-way mixing valve with union connections, serviceable low-lead stainless steel check valves, a recirculation connection and low-lead isolation valves for fast and simple installation. The LEGIOMIX controller is pre-mounted and pre-wired to the valve actuator, return water temperature sensor and tempered water sensor in a packaged wall mount configuration with steel uni-strut frame that can bolt to the wall through any of the perforations. The assembly also includes copper type L pipe and a 24 VAC transformer.The LEGIOMIX6000 series electronic mixing valve complies with the requirements of NSF/ANSI 372-2016 as certified by ICC-ES, and is certified to ASSE 1017, CSA B125.3, UPC, IPC, Low Lead Laws and listed by ICC-ES for use in accordance with the U.S. and Canadian plumbing codes. The valve meets the requirement of CSA Z317.1 Special Requirement for Plumbing Installations in Health Care Facilities, certified by ICC-ES.

LEGIOMIX® is an advanced electronic mixing valve with digital control of temperature for commercial domestic hot water systems. The daily exercise function keeps the ball valve free of scale build-up to ensure smooth operation. Rated highest in the market for flow capacity, this feature packed product also has an industry exclusive calendar-based scheduling program for automatic circuit thermal disinfection.The LEGIOMIX® electronic mixing valve provides precise temperature control over very low and very high flow rate demand, minimal pressure drop with a ball valve control element, automatic self-cleaning to prevent scale formation and easy-to-use digital interface with data logging, alarming and status indication. The LEGIOMIX electronic mixing valve is furnished with a controller with LCD user interface that provides a set of programs for circuit thermal disinfection to kill Legionella. The controller is configurable via keypad, or local or remote computer. Depending on the type of system and habits of the user, temperature levels and operation times can be programmed as desired. In addition, it comes standard with monitoring and remote control connections.The LEGIOMIX6000 series electronic mixing valve is powered by 24 VAC. (Caleffi provides a 115/24 VAC transformer in the package.) It is ICC-ES certified to ASSE 1017 and CSA B125.3. It complies with codes IPC, IRC, NPC and UPC for use in accordance with the US and Canadian plumbing codes, and standard NSF/ANSI 372, low lead. Also, it meets the requirement of CSA Z317.1 Special Requirement for Plumbing Installations in Health Care Facilities, certified by ICC-ES.

Straight fitting

Straight fitting

Long bend for trap connection

Long bend for trap connection

Bend with cap for trap connection

Made of CW 617N brass fittings, TURBO PRESS, with integrated hose tail and two ageing-resistant and leak proof EPDM rings, they withstand high pressure and high temperature ensuring the hydraulic tightness. the design of the O-ring LBP (Leak before press) allows to identify a possible leakage of the fluid, during the testingphase of the installation, in case the fittings was not pressed. The TURBO PRESS fittings are suitable for tooling with TH, B, U e H, clamp’s profile till size 32, while for larger sizes they are suitable with TH jaws.

The patented “ TURBO PRESS GAS”, our multilayer pipe and fitting system, offers the most extensive guarantee for the house gas installations. The system makes very easy and reliable the laying of new installations and very practical in revising the existing ones. Pipes and fittings are assembled by means of electro-mechanical pressing tools with TH profile, that permanently deform the stainless steel AISI 304 bushing and ensuring the perfect union and seal of the two parts.

Made of CW 617N brass fittings, TURBO PRESS, with integrated hose tail and two ageing-resistant and leak proof EPDM rings, they withstand high pressure and high temperature ensuring the hydraulic tightness. the design of the O-ring LBP (Leak before press) allows to identify a possible leakage of the fluid, during the testingphase of the installation, in case the fittings was not pressed. The TURBO PRESS fittings are suitable for tooling with TH, B, U e H, clamp’s profile till size 32, while for larger sizes they are suitable with TH jaws.

The patented “ TURBO PRESS GAS”, our multilayer pipe and fitting system, offers the most extensive guarantee for the house gas installations. The system makes very easy and reliable the laying of new installations and very practical in revising the existing ones. Pipes and fittings are assembled by means of electro-mechanical pressing tools with TH profile, that permanently deform the stainless steel AISI 304 bushing and ensuring the perfect union and seal of the two parts.

Balcony Pot 80 mm with 50 mm side inlet

Balcony Pot 80 mm with 90 ° bend in PVC with 80 mm spigot end

Balcony pot 50-60 mm with 90 ° bend in PVC without 70 mm spigot end

Bend for trap connection

Ventilation branch

Wingback elbow gas

Shaft branch right

Parallel branch

Unilateral double branch max flow

Elbow fitting 15° hot water

Elbow fitting 15° cold water

Terminal fitting cold water

Wingback elbow hot water

Terminal U fitting hot water

Wingback elbow hot water

Terminal U fitting cold water

Wingback elbow hot water

Kit with nut for manifolds

Wingback elbow cold water

ABS inspection pipe with oval access

Terminal fitting hot water

Derivation clamp for multilayer systems

Straight fitting with cap

Elbow fitting with extension

Fitting with bend

Wingback elbow cold water

Wingback elbow cold water

Low wingback elbow cold water

Low wingback elbow hot water

Siphon complete

T-piece

BackFlip bend

BottomTurn bend

Bottle odour trap

Pre-Formed Pipe Bridge

Elbow with Wallnut

Air Tube Pipe Bridge

FF Pipe Bridge

Double Elbow with Wallnut

Pipe Bridge

Flexible Tube

Roth Thermaset Distributor

Roth RIS Comprehensive drinking water and heating installation with the Roth pipe installation system

Duș pentru corp și ochi, montaj mural, modular

Condensate drain

Rezervor mascat pentru pisoar

Rezervor disponibil în culorile alb, umbra și negru

Wall plate elbow 90° FF

Rezervor mascat pentru bideu

Firenze trap with access

Double increaser

87°30’ corner branch

Parallel branch

Bend for trap connection with cap, without grommet

Bend for trap connection with cap, without grommet

Grey bend with right inlet

Grey bend with two inlets

Grey bend with left inlet

87°30’ bend with front inlet with seal

Back to back connector for trap with caps