One way cassette fan coil unit with low air intake grid and frontal air outlet grid

One way cassette fan coil unit with low air intake grid and frontal air outlet grid

ComfoClime 36 + ComfoAir Q 450/600 ERV ST/TR

ComfoClime 24 + ComfoAir Q 350/450 ERV ST/TR

VAV with integrated silencer supply

VAV with integrated silencer extract/return

Récupérateur de chaleur, adapté à gauche et à droite

Circular single wall VAV

Rectangular single wall VAV

Rectangular double wall VAV with silencer

Circular double wall VAV

Rectangular double wall VAV

Circular double wall VAV with silencer

Template

Unité de ventilation à récupération de chaleur - montage au plafond, mural, au sol. Remarque : La bride pour le raccordement de gaine raccordée est disponible en standard pour OptiAir 260 avec 160 mm et OptiAir 360 avec 180 mm.

Récupérateur de chaleur avec échangeur enthalpique

Unité de ventilation à récupération de chaleur - montage au plafond

Unité de ventilation à récupération de chaleur - montage au plafond

Ceiling induction unit

Fan coil unit

Fan coil unit

Ventilateur ÉCO+

Water-supplied suspended air heater

Water-supplied suspended air heater

Water-supplied suspended air heater

Brandschutzklappe EI90S BSK-R-M-M10

Brandschutzklappe EI90S BSK-R-L-M7

Brandschutzklappe EI90S BSK-E-M-S

Brandschutzklappe EI90S BSK-E-M-O3

Brandschutzklappe EI90S BSK-E-M-O2

Brandschutzklappe EI90S BSK-E-M-O1

Brandschutzklappe EI90S BSK-E-M-M12

Brandschutzklappe EI90S BSK-E-M-M1

Brandschutzklappe EI90S BSK-E-L-O3

Brandschutzklappe EI90S BSK-E-L-O2

Brandschutzklappe EI90S BSK-E-L-O1

Brandschutzklappe EI90S BSK-E-L-M11

Brandschutzklappe EI90S BSK-E-L-M9

Brandschutzklappe EI90S BSK-E-L-M7

Brandschutzklappe EI90S BSK-E-M-M9

Brandschutzklappe EI90S BSK-E-M-M10

Brandschutzklappe EI90S BSK-E-LR-S

Brandschutzklappe EI90S BSK-E-M-M8

Brandschutzklappe EI90S BSK-E-M-M7

Brandschutzklappe EI90S BSK-E-L-S

Induction ventilator

Heat recovery unit

Heat recovery unit

Silencer

CO2 Sensor wall-mounted

Heat exchanger commercial series

Vertical Lossnay with Silencer Box P-500SB-E

Vertical Lossnay with Silencer Box P-500SB-E

Vertical Lossnay with Silencer Box P-350SB-E

Vertical Lossnay with Silencer Box P-350SB-E

Vertical Lossnay with Silencer Box P-250SB-E

Vertical Lossnay with Silencer Box P-250SB-E

Ubbink Air Excellent

Heat Exchanger Indoor Units

Fan coil with painted metal casing

Fan coil with painted metal casing with radiant effect

Fan coil with painted metal casing

Built-in fan coil without panelling

Heat recovery unit

Suspended electric air heater

The Mark Airstream HWX is an Eurovent certified heat recovery unit equipped with rotary heat exchanger. There are 9 types available ranging in air volume from 1500 m3/h to 27500 m3/h for both indoor and outdoor installation. The following configurations are available: A1: Airstream HWX A2: Airstream HWX with after-heater or cooler A3: Airstream HWX with after-heater and cooler A4: Airstream HWX with damper(s) A5: Airstream HWX with damper(s), after-heater or cooler A6: Airstream HWX with damper(s), after-heater and cooler A7: Airstream HWX with outdoor- and recirculation damper A8: Airstream HWX with outdoor- and recirculation damper, after-heater or cooler A9: Airstream HWX with outdoor- and recirculation damper, after-heater and cooler

The Mark Airstream CFX is an Eurovent certified heat recovery unit equipped with high-efficiency counterflow heat exchanger with bypass. There are 12 types available ranging in air volume from 600 m3/h to 20.000 m3/h for both indoor and outdoor installation. The following configurations are available: A1: Airstream CFX A2: Airstream CFX with after-heater or cooler A3: Airstream CFX with after-heater and cooler A4: Airstream CFX with damper(s) A5: Airstream CFX with damper(s), after-heater or cooler A6: Airstream CFX with damper(s), after-heater and cooler

Fan coil unit

Fan coil unit

Fan coil unit

Heat recovery unit

Heat recovery unit

IVAR FCU-Kit: Pre-assembled brass multi-function bypass unit for fan-coil systems, chilled beams, heaters and other constant flow rate conditioning systems. Can be used for both heating and cooling. Consisting of: a pair of three-way valves for setting 5 different operating modes, a mesh filter, two loading/unloading taps, a Venturi orifice with a pair of piezometric sockets and a PICV flow regulator. Permissible differential pressure ranges and flow control range (for PICV): with PICC 03 cartridge (code 590123) 16- 200 kPa, 37-575 l/h; with PICC 03 cartridge (code 590124) 30-400 kPa, 64-1110 l/h. Mesh filter (500 μm) in stainless steel AISI 304. Connections to the primary circuit (with unions): 1/2 "F (DN 15) - 3/4 "F (DN 20). Connections to the secondary circuit: 1/2 "F (DN 15) - 3/4 "F (DN 20). Maximum operating pressure: 10 bar. Maximum operating temperature: 120 °C. Available with insulation shell in grey ARPRO 5135 FR with conductivity 0.037 W/mK, density 50 kg/m3, reaction to fire class HF-1 according to UL-94 standard.

Gas-fired high performance air heater with axial fan

Grille on Duct

Grille on Duct

Air Terminal Overflow Standard

Air Terminal Overflow Perforated

The PRxMIOO is solely the perforated face from the PTxMI, and suitable for overflow.

The RRBD is the return version of, and is the same as the RTBD in appearance.

The RRBM and RRTB are the return versions of, and are the same as the RTBM and RTBT in appearance.

The RTBD is a flower-shaped swirl diffuser, type: surface-mounted. The swirl technology creates an extremely stable supply-air pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room The smaller versions of the RTBD can be supplied as a poured concrete diffuser. Most important features: - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures - Suitable for low rooms - Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

The RTFO is a conical swirl diffuser, type: surface-mounted, which gives the diffuser a more open appearance. The diffuser is easy to fit by means of one central screw in the separately supplied plenum. The same diffuser is used for supply and return. Most important features: - Simple and quick assembly - Highly inductive - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures A clamp ring can be supplied as an accessory that enables you to fit the diffuser quickly and easily, without any tools, into a flat ceiling plate. Swirl diffusers are extremely suitable for variable volume systems.

The RTBC is a surface-mounted diffuser in round shape. The swirl technology creates an extremely stable inflow pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room Most important features: - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures - Suitable for low rooms - Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

This is the same diffuser as the RTFO Supply, but has been made suitable for Revit return systems

The RTLD is a louvre-faced diffuser with a pure radial spread pattern. The diffuser is easy to adjust from a horizontal to a more vertical spread pattern. Most important features: - Up to extremely large air volumes - Can also be fitted free-hanging - Adjustable interior The diffuser can also be fitted in walls.

The PRxD is the return version of,and is the same as the PTxD in appearance.

The PTxD is suitable for large air volumes with large temperature differences in respect of the room The diffuser contains air-direction elements that enable you to modify the supply-air direction afterwards. Most important features: - Highly inductive - High number of air changes achievable - Pure radial spread pattern This diffuser series is also suitable for Baopt control systems.

The PTxMI is considered to be the basic diffuser for modular ceilings. The diffuser is applied frequently by architects when they design buildings. The diffuser is fully perforated, which creates a beautiful aesthetic fit. Most important features: - Highly inductive - High number of air changes achievable - Pure radial spread pattern This diffuser series is also suitable for Baopt control systems.

The RTFM is a conical swirl diffuser, type: t-bar mounted. The diffuser is easy to fit by means of one central screw in the separately supplied plenum. The same diffuser is used for supply and return. Most important features: - Simple and quick assembly - Highly inductive - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures Swirl diffusers are extremely suitable for variable volume systems.

The RRBC is the return version of, and is the same as the RTBC in appearance.

The RTBM and RTBT ares a flower-shaped swirl diffusers, type: t-bar mounted. The swirl technology creates an extremely stable inflow pattern. The diffuser is suitable for large air volumes with extremely large temperature differences in respect of the room. Most important features: - Suitable for heat-pump systems (VRV/ VRF) with extremely low supply-air temperatures - Suitable for low rooms - Highly inductive Swirl diffusers are extremely suitable for variable volume systems.

This is the same diffuser as the RTFM Supply, but has been made suitable for Revit return systems

The PRxMI is the return version of, and is the same as the PTxMI in appearance.

Induction thrust fan

CO sensor, Gas Sensor