Backflow protection unit TBE-STBA

Three-Way Valve

Ball Valve

Ball Valve

Purgeur d'air à purge latérale

Unité de circulation / unité de dérivation / groupe de pompes, préfabriquées et prêtes à l'emploi plug-and-play pour des applications telles que les systèmes de radiateurs, de ventilation et de chauffage par le sol Temp. plage : +5 – +110 °C, max. pression : 1,0 Mpa.

Unité de circulation / unité de dérivation / groupe de pompes, préfabriquées et prêtes à l'emploi pour des applications telles que les systèmes de radiateurs, de ventilation et de chauffage par le sol, avec isolation thermique. Temp. plage : +5 – +110 °C, max. pression : 1,0 Mpa.

Purgeur d'air automatique droit pour haute pression, raccord 1/2" F

Unité de circulation / unité de dérivation / groupe de pompes, préfabriqués et prêts à l'emploi plug-and-play pour les applications de refroidissement telles que les systèmes de ventilation et de refroidissement par le sol isolés avec AF/Armaflex AF-2 en standard. Temp. Plage : -20 – +80 °C, max. pression : 1,0 Mpa.

Kit de raccordement pour vases d'expansion SpiroExpand

Soupape à plein débit en acier inoxydable - presse x presse

Set de vanne à sphèree 90° B+R 1''x1'' avec thermomètre - nickelé (joint inclus)

Set de vanne à sphère B+R - nickelé (joint inclus) - 1''x1''

Set de vanne à sphère 90° B+R 1''x1'' - nickelé (joint inclus)

3 way valve (for anti-freezing or recirculation loop control)

Prescor IC Fill 15mm x 22mm - 8.0 Bar

Slanted seat valve, body without discharge screw

Slanted seat valve, body with discharge screw

Shutt-off valve, body without discharge screw

Shutt-off valve, body with discharge screw

Vanne d'équilibrage automatique

Mitigeur électronique avec désinfection thermique programmable

Balancing valve for the hydraulic balancing of distribution lines in central heating and cooling systems with closed circuits. Flow determination by differential pressure measurement taking into account the preset values, e.g. with the OV-DMC3 measuring system. Installation in flow or return. In an angled version with continuously controllable, infinitely fine presetting using a non-rising handwheel. Presetting is reproducible, lockable and sealable as standard. All functional elements on the handwheel side. Equipped with two measuring, draining and filling valves as standard. Valve housing and parts in contact with the medium made of dezincification-resistant brass, EPDM or PTFE. Maintenance-free, double spindle seal. Female thread on both sides according to EN 10226

High performance; easy-to-install.The Caleffi SinkMixer™ 5212 scald protection undersink thermostatic mixing valve is precision engineered to deliver safe tempered water. Patent pending forged low-lead brass valve body enables high flow capacity in a very compact body. The easy-to-install 4-port design connects all water lines and, compared to standard 3-port valves, requires less piping and no tee. ICC-ES certified compliance to NSF/ANSI/CAN 61-2019 and IPC, IRC, UPC and NPC for drinking water systems in accordance with the U.S. and Canadian plumbing codes.

High performance; easy-to-install.The Caleffi SinkMixer™ 5212 scald protection undersink thermostatic mixing valve is precision engineered to deliver safe tempered water. Patent pending forged low-lead brass valve body enables high flow capacity in a very compact body. The easy-to-install 4-port design connects all water lines and, compared to standard 3-port valves, requires less piping and no tee. ICC-ES certified compliance to NSF/ANSI/CAN 61-2019 and IPC, IRC, UPC and NPC for drinking water systems in accordance with the U.S. and Canadian plumbing codes. The 5212AP product includes compression union connections with plug for cold water outlet and copper compression fittings kit for hard piping installations.

The PresCal™ Compact 533H series pressure reducing valve, ideal for small system applications, is constructed of a DZR low-lead forged brass body and incorporates a unique noise reducing and high flow seat design. It is easily serviced with a replaceable cartridge and has an integral stainless steel filter (35 mesh), helpful for water systems that may contain sediment or debris. A tamper-resistant cap is included to replace the standard cap to hide the adjustment screw to help prevent set point tampering.The valve complies with NSF/ANSI 61 (180°F/82°C Commercial Hot) as certified by ICC-ES, and complies with NSF/ANSI 372, low lead, and codes IPC, IRC, NPC and UPC for use in accordance with the US and Canadian plumbing codes, as certified by ICC-ES.

The QuickSetter+™ manual balancing valve contains a built-in flow meter and sight gauge, negating the need for differential pressure gauges and reference charts. Circuit balancing is fast, easy and accurate. Constructed of DZR low-lead brass, QuickSetter+ is ideally suited for use in plumbing applications such as hot water recirculation systems. The built-in check valve protects against circuit thermo-siphoning. The outlet dual-scale temperature gauge (optional) verifies the fluid temperature in the circuit. The flow meter sight gauge is dry (not exposed to the fluid) thus eliminating the possibility of gauge clouding/scaling over time. The QuickSetter+ can also be used in heating systems. Peroxide-cured EPDM seals provide chlorine and chloramine resistance and long operating life.

Stable mixed temperature performance with durable construction for long life. Due to the unique mixing chamber design, Caleffi MixCal™ produces very stable mixed water temperature as inlet temperatures and pressures vary. Scale formation is minimized via sliding surfaces constructed of an anti-scale polymer, thus guarding against seizing or erratic mixed temperatures. O-ring seals made from durable peroxide-cured EPDM resist wear from common water treatment additives such as chlorine and chloramines.

Three-way diverting and mixing valve

Bronze piston type spring assisted check valve

6-way ball valve G3/4

6-way ball valve G3/4

Electromotive rotary actuator “Aktor R ST L”, 24 V, steady control 0-10 V, or 0-24 V as 2 point control

B2KL 6-way ball valve

Stopvalve with press ends

Non-return valve

Unspecified Valve

Inlet Combination

Dry valve

Suction diffuser series 731-D with PN10/PN16 flange

Low pressure actuator

Electric -pneumatic actuators

Alarm Check Valve

Double pneumatic actuators

Firelock alarm check valve

Electrical accessories

VAV-controlers and actuators

Butterfly Valve Wheel

Globe Valve

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Butterfly Valve Wheel

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Butterfly Valve Wheel

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve Skew

Globe Valve

Shut-off and change-over valves 2-way and 3-way

(Control) ball valve Actuators

Belimo ZoneTight™ (Room & Zone Solutions)

Control ball valves 2-way and 3-way

Energy-Valve

Globe valves and actuators 2-way and 3-way

SuperCap actuators with safety functionality

Fire damper actuators

Butterfly valves & actuators

Non spring-return actuators

Electronic pressure-independent 6-way characterized control valve

6-way characterised control valve

Elektronische drukonafhankelijke regelkogelkraan

KHS venturi flow divider

KHS venturi flow divider

Thermostatic control unit

Pressure independent control valve

Non Return Valve

Direct connection for fan coils

Direct connection for fan coils

Actuator

Actuator

Actuator

Actuator

Gear operator

Butterfly valve with handle