Télécommande - Télécommande filaire avec Easy Touch et Easy View avec écran à cristaux liquides à points complets - Panneau LCD avec commande lumineuse - Interface simple avec seulement trois boutons - Affichage multilingue (12 langues) - Nouvelle fonction pour KXZ3 et équipements de sécurité - Réglage de la fonction d'économie d'énergie KXZ3 - Commande pour kit de capteur thermique (option pour le modèle désigné uniquement)

Contrôleur central SL4 - Commande centrale à écran tactile couleur avec écran LCD interactif de 9 pouces - Fonctions de contrôle, de surveillance, de planification et de service/maintenance pour jusqu'à 128 unités intérieures. - Le contrôle avec PC est disponible en utilisant Microsoft Edge/Google Chrome. - Les unités intérieures peuvent être contrôlées, programmées, surveillées et soit individuellement, en groupes ou en blocs de groupes

Kit détecteur de fuite de fluide frigorigène pour R32 KX - Un dispositif qui détecte le réfrigérant en cas de fuite de réfrigérant R32 dans la pièce - Grande flexibilité d'installation pour les mesures de sécurité nécessaires dans la norme IEC60335-2-40 (Ed.6) pour le système d'utilisation R32. - Installation facile - Alarme de sécurité en option / Kit vanne d'arrêt en option / Ventilation mécanique (tiers) activable par détecteur de fuite

Kit vanne d'arrêt de sécurité pour R32 KX - Un dispositif qui bloque le flux de réfrigérant vers l'endroit où se produit la fuite - Grande flexibilité d'installation pour les mesures de sécurité nécessaires dans la norme IEC60335-2-40 (Ed.6) pour le système d'utilisation R32. - Installation facile

Wireless remote controller

Control for commercial and residential monobloc heat pumps.

Control for commercial and residential monobloc heat pumps.

Control for commercial and residential monobloc heat pumps.

Contrôle pour les pompes à chaleur monoblocs commerciales et résidentielles.

Control Box

Remote controller

Remote controller

Wired controller

Wired controller

Central controller

Remote control for multiMATIC VRC 700 Art. No.: AT/DE: 0020171333 or 0020231565 BE/CZ/CH/FR/NL/IT/PL/SK/UK: 0020171334 or 0020231566 CN/DK/ES/FI/NO/SE/PT/TR: 0020171335 or 0020231567 AL/BA/BY/HR/HU/KO/ME/MK/RO/RS/SI/UA: 0020171336 or 0020231568

System controller Controller can be used with sensoNET and the myVAILLANT App / sensoAPP. System control for the following technologies: Gas, oil and heat pump. And can be integrated with following system components: Solar thermal energy, photovoltaics and ventilation. The controller can be combined with following control accessories: VR70, VR71, VR 91(f) or/and VR40. The follow-up unit is the sensoCOMFORT VRC 720. Art. No.: AT/DE: 0020266797 BE/CH/FR/IT/NL: 0020171315 CN/ES/PT/TR: 0020171318 CZ/PL/SK: 0020171316 DK/FI/SE/NO: 0020171317 BY/MD/HU/RO/UA: 0020171319 AL/BA/HR/KO/ME/MK/RS: 0020171320 BY/EE/LT/LV: 0020184837 BG/GR/IE/SI/UK: 0020184838 UK: 0020236291 and 0020259829 and 0020236293

Wiring centre for multiMATIC VRC 700(f) and sensoCOMFORT VRC 720(f) Art. No.: VR 70: AT/DE: 0020184843 BE/CH/CN/CZ/DK/FR/ES/INT/IT/NL/NO/PL/SE/SK/TR/UK: 0020184844 BA/HR/HU/INT/RO/RS/RU/SI/UA: 0020184845 VR 71: AT/DE: 0020184846 BE/CH/CN/CZ/DK/FR/ES/INT/IT/NL/NO/PL/SE/SK/TR/UK: 0020184847 BA/HR/HU/INT/RO/RS/RU/SI/UA: 0020184848

Semi-Instant DHW producer

Semi-Instant DHW producer

Instant DHW producer

Semi-Instant DHW producer

Instant DHW producer

Semi-Instant DHW producer

Semi-Instant DHW producer

Instant DHW producer

Semi-Instant DHW producer

Instant DHW producer

Interface for remote monitoring system

Heat pump remote controller

Function module for MiPro and MiPro Sense controllers Art. No. - AT/ES/FR/HU/NL/PL: RED-3: 0020257508 RED-5: 0020257510

System controller Controller can be used with MiLink v3 and the MiPro App. System control for the following technologies: Gas and heat pump. And can be integrated with following system components: Solar thermal energy and photovoltaics. The MiPro R can be used with 1 x RED-3 or 1 x RED-5 and also up to 2 x MiPro remote (R) controls can be added. Art. No.: MiPro v6: AT/ES/FR/INT/PL: 0020218373 MiPro R: AT/ES/FR/INT/PL: 0020231583

Function module for MiPro and MiPro Sense controllers. Art. No.: RED-3: 0020257508 RED-5: 0020257510

System controller Controller can be used with MiLink v3 and the MiGo Link App / MiControl. System control for the following technologies: Gas and heat pump. And can be integrated with following system components: Solar thermal energy and photovoltaics. The MiPro Sense SRC 720 can be used with 1 x RED-3 or 1 x RED-5 and also up to 2 x MiPro Sense remote controls can be added. Art. No.: SRC720: AT/ES/FR/INT: 0020260971 HU/PL: 0020260972 SRC 720f: AT/ES/FR/INT: 0020260979

Gateway Can be used with all Saunier Duval heat generators with eBUS inferface from 2007 onwards. Art. No.: ES/FR/NL: 0020261008 Bulex - BE: 0020261008

System controller Controller can be used with MiLink v3 and the MiPro App. System control for the following technologies: Gas and heat pump. And can be integrated with following system components: Solar thermal energy and photovoltaics. The MiPro R can be used with 1 x RED-3 or 1 x RED-5 and also up to 2 x MiPro remote (R) controls can be added. Art. No.: 0020231584

System controller Controller can be used with MiLink v3 and the MiGo Link App / MiControl. System control for the following technologies: Gas and heat pump. And can be integrated with following system components: Solar thermal energy and photovoltaics. The MiPro Sense SRC 720 can be used with 1 x RED-3 or 1 x RED-5 and also up to 2 x MiPro Sense remote controls can be added. Art. No.: 0020260970

Monobloc heat pump control module Can be used with GeniaAIr mono. Art. No.: ES/FR/INT/PL: 0010031650 CZ/NL: 0010031652 Bulex - BE: 0010031652

Solar controller Art. No.: ES/INT: 00203649

Solar controller Art. No.: 0020203652

System controller Controller can be used with sensoNET and the myVAILLANT App / sensoAPP. System control for the following technologies: Gas, oil and heat pump. And can be integrated with following system components: Solar thermal energy, photovoltaics and ventilation. The sensoCOMFORT VRC 720 can be used with 1 to 3 x VR70 and/or 1 x VR 71 wiring centres and also up to 4 x VR 92 remote controls can be added. For the VRC 720f 2 x VR 92f is the maximum. Art. No.: VRC 720: BE/CH/FR/IT/NL: 0020260913 or 0020260929 AT/DE: 0020260914 HU/INT/RO/RU/TR: 0020260915 DK/NO/PL/SE: 0020260916 CZ/SI/SK: 0020260919 INT/UA: 0020260920 BA/ES/HR/INT/RS/UK: 0020260921 UK: 0010036819 or 0010036821 VRC 720f: AT/DE: 0020260930 DE/NO/PL/SE: 0020260932 UK: 0010036820 and 0010036827

Solar controller Art. No.: BE/CH/DK/FR/IT/NO/UK: 0020203654 TR: 0020224465

Monobloc heat pump control module Art. No.: BE/CH/DE: 0010031643 DK/NO/SE/UK: 0010031644 AT/NL: 0010031645 CZ/HU/PL/RU/SK: 0010031646 BA/ES/FR/HR/IT/RS/TR: 0010031647 INT: 0010031648 SI: 0010031649

Gateway Can be used with all Vaillant heat generators with eBUS inferface. Compatible controls for controlling via myVAILLANT app/sensoAPP: All sensoCOMFORT 720, sensoDIRECT 710, sensoHOME 390 eBUS controls. Art. No.: AT/BA/BE/CH/CZ/DE/DK/FR/HR/HU/NL/PL/RS/SE/SI/SK/TR: 0020260962 or 0020260965 UK: 0020260963 ES/INT/IT/NO/RO/UA: 0020260964

System controller Controller can be used with sensoNET and the myVAILLANT App / sensoAPP. System control for the following technologies: Gas, oil and in combination with DHW cylinder. Art. No.: BE/CH/FR/IT/NL: 0020260943 AT/DE: 0020260944 HU/INT/RO/RU/TR: 0020260945 DK/PL: 0020260946 BA/CZ/HR/RS/SI/SK: 0020260949

Remote control for sensoCOMFORT VRC 720(f) Art. No.: AT/DE: 0020260923 or 0020260938 DK/PL/SE/UA: 0020260924 or 0020260939 BA/BE/CH/ES/FR/HR/INT/IT/NL/RS/UK: 0020260925 or 0020260940 CZ/SI/SK: 0020260926 or 0020260983 HU/RO/RU/TR: 0020260927 or 0020260942

Hydrolution - Remote controller

Remote controller

FTC5 flow temperature controller - slave

Remote controller

Remote controller

IVAR POLIFEMO® cod. 520150: Spherical crystal polyphosphate and silicate doser with integrated safety filter to protect the system from limescale and corrosion. To be installed vertically or horizontally on the cold water pipe upstream of the domestic hot water producer (boiler, water heater, etc.) or upstream of the appliance to be protected (washing machine, dishwasher). Chemical compounds proportionally dosed thanks to the calibrated consumption of the spheres according to the quantity of water that passes through the component. Float with refill indicator for cartridge replacement. Threaded body in chromed brass CW617N, glass in Grilamid® TR, sealing elements in peroxide EPDM. Flow coefficient Kv= 2,15 m3/h, maximum flow rate 25 l/min (with ΔP = 0,5 bar). Size of the polypropylene safety filter: 100 μm. Temperature: 0÷40 °C. Maximum working pressure: 10 bar. Volume of water treated with one refill: about 30 m3. Connections: 1/2 "F (x3). IVAR POLIFEMO® PLUS cod. 520151: Spherical crystal polyphosphate and silicate doser with integrated safety filter to protect the system from limescale and corrosion. To be installed vertically or horizontally on the cold water pipe upstream of the domestic hot water producer (boiler, water heater, etc.) or upstream of the appliance to be protected (washing machine, dishwasher). Chemical compounds proportionally dosed thanks to the calibrated consumption of the spheres according to the quantity of water that passes through the component. Float with refill indicator for cartridge replacement. Threaded body in chromed brass CW617N, glass in Grilamid® TR, sealing elements in peroxide EPDM. Flow coefficient Kv= 1,10 m3/h, maximum flow rate 13 l/min (with ΔP = 0,5 bar). Size of the polypropylene safety filter: 100 μm. Temperature: 0÷40 °C. Maximum working pressure: 10 bar. Volume of water treated with one refill: about 30 m3. Connections: 1/2 "F (x3). Integrated by-pass to replace the cartridge without interrupting the water supply to the system.

Mixing and pump units for radiant systems UNIMIX/UNIMIC-C modular with: UM 01 – UM 01D/S: regulation unit UNIMIX with/without pump complete with 3-way mixing valve with headwork for thermostatic control, secondary by-pass with double micrometric adjustment and position memory, primary by-pass for recirculation, thermomanometer 0÷120 °C 0÷6 bar for mixed water, thermometers 0÷80 °C for delivery and return waters, probe pocket for mixed water, shut-off ball valves G 1” secondary side and automatic air vent valve. Available with or without straight or angled shut-off ball valves G 3/4”F on primary side. Available with or without 3-speed standard pump WILO3F centre distance 130 mm or variable-speed electronic pump WILO4F centre distance 130 mm. Body made of nickel-plated CB753S brass; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Max differential pressure at mixing valve ends 250 mbar. UMC 01 – UMC 01D/S: regulation unit UNIMIX-C with/without pump complete with 3-way mixing valve with headwork for thermostatic control, secondary by-pass with double micrometric adjustment and position memory, primary by-pass for recirculation, thermometer 0÷80 °C for mixed water and probe pocket for mixed water. Available with or without straight or angled shut-off ball valves G 3/4”F on primary side. Available with or without 3-speed standard pump WILO3F centre distance 130 mm or variable-speed electronic pump WILO4F centre distance 130 mm. Body made of nickel-plated CB753S brass; gaskets and O-rings made of peroxide-cured EPDM; other parts made of CW617N brass. Max operating temperature 100 °C. Max operating pressure 10 bar. Max differential pressure at mixing valve ends 250 mbar. AUM 03: expanded polypropylene insulating cover. T 5011 U: thermostatic head with incorporated control and immersion remote sensor. Range 30÷55 °C o 25÷50 °C. Cable lengh 2 m. RV 01: axial servomotor M30x1.5. 3-point adjustment 230 V AC or proportional 0-10 V 24 V AC with display. AUM 01 - AUM 11 D/S: high-temperature kit for UNIMIX/UNIMIX-C with primary side connections G 1” and plain manifolds with 3 outlets (EUROK outlets). Complete with fill/drain valve and differential pressure by-pass valve 0.2÷0.6 bar. Available with or without straight or angled shut-off ball valves G 1” primary side. AUM 02 - AUM 12 D/S: high-temperature kit for UNIMIX/UNIMIX-C with primary side connections G 1” and manifolds with 3 outlets (delivery: double micrometric adjustment lockshield; return: headwork for thermostatic control with protection cap; EUROK outlets). Complete with fill/drain valve and differential pressure by-pass valve 0.2÷0.6 bar. Available with or without straight or angled shut-off ball valves G 1”F on primary side. AC 613 FU: fixed setting 60 °C safety thermostat pre-wired.

IVAR Dirtstop® XL: triple effect magnetic dirt separator: cyclonic action guaranteed by a patented internal insert, developed to guide the fluid directed to the boiler in order to maximize the slowing down and decantation of the debris; subsequent removal of ferrous particles by means of a neodymium magnet, magnetic field 14000 G; mechanical filtration with an 800 μm mesh filter (pre- assembled 500 μm filter for the first cleaning of the system). Internal components completely inspectable, removable and washable by removing the upper plug, with the special lever provided. Manual air vent valve. Draining valve with opening lever and tap. Swivel fitting for mounting to the pipeline in different orientations, with the special lever provided. Allowed installation on horizontal, vertical or oblique lines. Buttonhole on magnetic insert, sealing band supplied. Materials: body, cyclonic insert and cap in PA66 + GF 30%; "T" joint and locking ring nut in PA66 + GF 30%; filters in stainless steel AISI 304; seals in peroxide EPDM. Compatible fluids: water; water + glycol max 50%. Maximum recommended flow rate: 2.13 m3/h. Maximum operating pressure: 3 bar. Operating temperature: 0-90 °C. Flow coefficient Kv: 6.7 m3 /h. Connections: Ø22 x Ø22 copper pipe (520124); 3/4" F x 3/4" F (520135); 1"F x 1" F (520136); 1"1/4 F x 1"1/4 F (520139).

IVAR Dirtstop®: Swivelling magnetic dirt separator with double filtering action, compact, with connection kit for the installation under the boiler. The double filtering action, guaranteed in any position thanks to the swiveling insert (Patent Pending), is performed by a neodymium magnet (magnetic induction B = 1,2 T (12.000 G)) and a mesh strainer (800 μm) made of AISI 304 stainless steel. The neodymium magnet is diametrically polarized and therefore it develops a homogeneous magnetic field which maximizes the capture of ferrous impurities. The mesh strainer retains all impurities. Impurities precipitate into the large settling chamber at the bottom of the dirt separator. The evacuation of impurities is possible without emptying the system and disassembling the dirt separator, thanks to the removable magnet and to the opening of a 360° swiveling shut-off ball valve. Body material: technopolymer IXEF®. Shut-off ball valve, swiveling fitting and plugs material: CW617N brass. Sealing elements material: Peroxide EPDM. Temperature: 0 ÷ 90 °C. Max pressure: 3 bars. Kv with swiveling insert in position A = 5,6 m3/h angle configuration; Kv with swiveling insert in position A1 = 6,2 m3/h straight configuration; Kv with swiveling insert in position B = 5,5 m3/h angle configuration; Kv with swiveling insert in position B1 =5,7 m3/h straight configuration. Compatible with water or glycol solutions max 50%. Connections: 3/4”M x 3/4"F.

IVAR EQCP1 (Kv 2.50): Two-way metering module for heating and cooling systems with DHW distribution lines and heat metering unit, equipped with template sockets instead of heat meters. Heat module consisting of CW617N brass monobloc with 2-way piston zone valve with M30×1.5 mm connection, selector balancing valve, filter, pocket for heat meter delivery sensor, M10×1 pressure pocket for dynamic balancing valve. Shut-off valves on the delivery and return to the boiler, on the delivery and return from the users, with slots for sealing. Drop pressure of the heat metering module Kv = 3.5. Placed on decomposable brackets and insulated with PP shell. Connections to the uprising columns and to the users of the G 3/4" heat module. Predisposition for heat meter with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Domestic block with G 3/4" connections that can be intercepted with ball valves with sealing slots. Predisposition for insertion of DHW volumetric meters with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Code 506587CB assembled in steel flush-mounted metal box with standard painted door, dimensions H 510 ×L 510 ×D 130 mm. Code 506587CL assembled in steel flush-mounted metal box with plasterable door, dimensions H 520 ×L 520 × D 130 mm. Max static operating pressure 10 bar; fluid temperature range 3÷90 ◦C. IVAR EQCP1 (Kv 3.00): Two-way metering module for heating and cooling systems with DHW distribution lines and heat metering unit, equipped with template sockets instead of heat meters. Heat module consisting of CW617N brass monobloc with 2-way piston zone valve with M30×1.5 mm connection, selector balancing valve, filter, pocket for heat meter delivery sensor, M10×1 pressure pocket for dynamic balancing valve. Shut-off valves on the delivery and return to the boiler, on the delivery and return from the users, with slots for sealing. Drop pressure of the heat metering module Kv = 3.5. Placed on decomposable brackets and insulated with PP shell. Connections to the uprising columns and to the users of the G 3/4" heat module. Predisposition for heat meter with G 3/4" connections, length 130 mm and nominal flow rate Qnom = 2.5 m3/h. Domestic block with G 3/4" connections that can be intercepted with ball valves with sealing slots. Predisposition for insertion of DHW volumetric meters with G 3/4" connections, length 110 mm and nominal flow rate Qnom = 1.5 m3/h. Code 506539CB assembled in steel flush-mounted metal box with standard painted door, dimensions H 510 ×L 510 ×D 130 mm. Code 506539CL assembled in steel flush-mounted metal box with plasterable door, dimensions H 520 ×L 520 × D 130 mm. Max static operating pressure 10 bar; fluid temperature range 3÷90 ◦C.

Simple Remote Controller -Considering specialized usage in hotel rooms -control buttons are limited only to minimum required functions -It can control up to 16 units individually, with pressing the AIR CON No. button. -Auto restart allows starting the air conditioner automatically when power supply is restored after power failure or by turning on the power switch.

The NIBE SMO 40 gives optimised control of the climate system and is designed to be combined with NIBE air/water heat pumps to provide an integrated climate system for homes and properties. Up to eight NIBE air/water heat pumps can be connected to a control system.

The NIBE SMO 20 gives basic control of the climate system and is designed to be combined with NIBE air/water heat pumps to provide an integrated climate system for your home.

Remote Controller RC-E5 - Easy to use functions and a clear LCD display. - Variety of functions are available weekly timer function - Extensive access to service and maintenance technical data

Thermostat indéfini

Commande centralisée Placez du contenu Mitsubishi Electric directement dans Revit et AutoCAD à l'aide de l'application gratuite [a href="https://store.mepcontent.com/fr/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Passerelle Placez du contenu Mitsubishi Electric directement dans Revit et AutoCAD à l'aide de l'application gratuite [a href="https://store.mepcontent.com/fr/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Télécommande Placez du contenu Mitsubishi Electric directement dans Revit et AutoCAD à l'aide de l'application gratuite [a href="https://store.mepcontent.com/fr/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Remote controller Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Commande centralisée Placez du contenu Mitsubishi Electric directement dans Revit et AutoCAD à l'aide de l'application gratuite [a href="https://store.mepcontent.com/fr/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Télécommande Placez du contenu Mitsubishi Electric directement dans Revit et AutoCAD à l'aide de l'application gratuite [a href="https://store.mepcontent.com/fr/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

BC controllers Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

PFD refrigerant flow branch control. -Easy installation, New PFD design means the connection of the indoor unit liquid pipe is made directly to the liquid line - bypassing the PFD. This means (x2) less pipe connections per indoor unit, reducing installation time and cost. -Optional PFD box extension cable that has a connector at ends makes it possible to separate the indoor unit and PFD box further, enable the PFD box to be located away from the indoor unit help reducing the influence of sound caused by PFD box and refrigerant flow.

SAR/A1.0.1-24 RT-control element

SBC/U6.0.1-84 HVAC/Co2-device, 6f. CE

SAF/A1.0.1-24 HVAC-control element

SBC/U10.0.1-84 HVAC/Co2-device, 10f. CE

SB/U12.0.1-84 12f. Control element

RTR Fan Coil with Display, AP

SB/U8.0.1-84 8f. Control element

AU12

Swivelling magnetic dirt separator with double filtering action, compact, with connection kit for the installation under the boiler. The double filtering action, guaranteed in any position thanks to the swivelling insert (Patent Pending), is performed by a neodymium magnet (magnetic induction B = 1,2 T (12.000 G)) and a mesh strainer (800 μm) made of AISI 304 stainless steel. The neodymium magnet is diametrically polarized and therefore it develops a homogeneous magnetic field which maximizes the capture of ferrous impurities. The mesh strainer retains all impurities. Impurities precipitate into the inclined settling chamber at the bottom of the dirt separator. The evacuation of impurities is possible without emptying the system and disassembling the dirt separator, thanks to the removable magnet and to the opening of a 360° swivelling shut-off ball valve. Body material: technopolymer IXEF®. Shut-off ball valve, swivelling fitting and plugs material: CW617N brass. Sealing elements material: Peroxide EPDM. Temperature: 0 ÷ 90 °C. Max pressure: 3 bars. Kv with swivelling insert in position A = 5,6 m3/h angle configuration; Kv with swivelling insert in position A1 = 6,2 m3/h straight configuration; Kv with swivelling insert in position B = 5,5 m3/h angle configuration; Kv with swivelling insert in position B1 =5,7 m3/h straight configuration. Compatible with water or glycol solutions max 50%. Connections: 3/4”M x 3/4"F.

Straight thermostatic valve with female connection. Connection to iron pipe x Connection to radiator: G 3/8"F x G 3/8"M with or without O-ring (with white protective cap or manual head), G 1/2"F x G 1/2"M with or without O-ring (with white protective cap or manual head), G 3/4"F x G 3/4"M with or without O-ring (with white protective cap or manual head), G 1"F x G 1"M with or without O-ring (with white protective cap), G 1"1/4F x G 1"1/4M with or without O-ring (with white protective cap). Flow rate pre-regulation only available for 3/8", 1/2" and 3/4" sizes: N-series (black protective cap or white manual head) or F-series (red protective cap or white manual head). Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol-water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Max differential pressure: 1 bar. Max differential pressure with thermostatic head installed: 0.25 bar. Body material: nickel-plated CW617N brass. Gaskets and O-rings materials: peroxide EPDM. Spring, washer and spindle material: stainless steel. Protective cap and manual head material: ABS.

Angle thermostatic valve with female connection. Connection to iron pipe x Connection to radiator: G 3/8"F x G 3/8"M with or without O-ring (with white protective cap or manual head), G 1/2"F x G 1/2"M with or without O-ring (with white protective cap or manual head), G 3/4"F x G 3/4"M with or without O-ring (with white protective cap or manual head), G 1"F x G 1"M with or without O-ring (with white protective cap), G 1"1/4F x G 1"1/4M with or without O-ring (with white protective cap). Flow rate pre-regulation only available for 3/8", 1/2" and 3/4" sizes: N-series (black protective cap or white manual head) or F-series (red protective cap or white manual head). Ring nut with spingle which can be replaced and inspected while the system is working. Fluid: water, glycol-water solutions (up to 30% glycol max). Max fluid temperature: 120° C. Max operating pressure: 10 bar. Max differential pressure: 1 bar. Max differential pressure with thermostatic head installed: 0.25 bar. Body material: nickel-plated CW617N brass. Gaskets and O-rings materials: peroxide EPDM. Spring, washer and spindle material: stainless steel. Protective cap and manual head material: ABS.

Self-optimizing vacuum spray deaeration/make-up unit

Self-optimizing vacuum spray deaeration/make-up unit

Self-optimizing vacuum spray deaeration/make-up unit

Self-optimizing vacuum spray deaeration/make-up unit

Equimeter metering module with unit for heat only. Heat metering unit: Qn =1,5 m3/h (for modules with kv = 2,25); Qn =2,5 m3/h (for modules with kv = 2,75). MATERIALS Heat metering monoblock: CB753S brass. Shut-off valves: CW617N brass. Sealing elements: Peroxide EPDM. Cabinet: white painted galvanized steel sheet. Support: galvanized steel sheet. CONDITIONS OF USE Maximum static operating pressure: 10 bar. Maximum fluid temperature: 90 °C. CONNECTIONS G 3/4"M

Temperature Controller

Module de mélange (vanne 3v et moteur 3 points 230 V, circulateur, 2 thermomètres)

Boîtier de gestion Examaster

Thermostat d’ambiance programmable radio à piles

Remote controller Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

FTC2B flow temperature controller Place directly in Revit and AutoCAD using the free [a href="https://store.mepcontent.com/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a] App

Kit CTA Placez du contenu Mitsubishi Electric directement dans Revit et AutoCAD à l'aide de l'application gratuite [a href="https://store.mepcontent.com/fr/Product/Details/49" target="_blank"]Mitsubishi Electric System Designer[/a]

Gestionnaire de flux énergétique