Browse within the largest BIM library and enrich your project with manufacturer-specific and generic BIM content! The powerful search engine allows you to find up-to-date graphic and parametric product information, ready to use in your BIM process. Simply load or insert 3D content directly into your Revit model or CAD drawing. Without having to leave your project environment. Free to download and use. You can download the app for free from [a href="https://store.mepcontent.com/en/product/details/2" target="_blank"]our store[/a].

Backflow protection unit TBE-STBA

Three-Way Valve

Ball Valve

Ball Valve

Clamp for InoxPres pipe

Clamp with rubber for InoxPres pipe

Pipe bridge

Pipe bridge FF

Pipe bridge FF

Pipe bridge MF

Pipe bridge MF

KE KELIT STEELFIX C-STEEL

KE KELIT KELOX ULTRAX

KE KELIT KELOX PROTEC

KE KELIT KELOX PPSU

KE KELIT CLIMATEFIX

KE KELIT COPPERFIX

KE KELIT STEELOX

KE KELIT KETRIX

KE KELIT KELEN PP-RCT LX-SENSO

KE KELIT KELEN PP-RCT

KE KELIT STEELFIX STAINLESS STEEL

KE KELIT KELOX PPSU-W

High efficiency water cooled chiller

High efficiency water cooled chiller with refrigerant type R1234ze

Water cooled chiller with refrigerant type R1234ze

Water cooled chiller with refrigerant type R410A

Expansion Vessel

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6,3 …7,5 M3] , Brass, Swivel design, including Airvent

Válvula de purga de aire con purga lateral.

Unidad de circulación/unidad de derivación/grupo de bombas, plug-and-play prefabricado y listo para usar para aplicaciones como sistemas de radiadores, ventilación y calefacción por suelo radiante Temp. rango: +5 – +110 °C, máx. presión: 1,0 Mpa.

Unidad de circulación/unidad de derivación/grupo de bombas, prefabricada y lista para usar para aplicaciones como sistemas de radiadores, ventilación y calefacción por suelo radiante, con aislamiento térmico. Temperatura. rango: +5 – +110 °C, máx. presión: 1,0 Mpa.

Purgador de aire automático recto para alta presión, conexión 1/2" H

Unidad de circulación/unidad de derivación/grupo de bombas, plug-and-play prefabricado y listo para usar para aplicaciones de refrigeración como sistemas de ventilación y refrigeración de suelo aislados con AF/Armaflex AF-2 como estándar. Temperatura. rango: -20 – +80 °C, máx. presión: 1,0 Mpa.

Connection DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 10 - 150 m3/h, fully insulated

Connection DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 10 - 150 m3/h, NOT insulated

Dirt, Magnetite and Air Combi Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8,7 …13,9 M3] , Brass, Swivel design

Dirt and Magnetite Separator with Cu22, Cu28, ¾", 1" and 1¼" connection PN10, Max Kv [8,7 …13,4 M3] , Brass, Swivel design

Air and Microbubble Separator with Cu22, Cu28, ¾" of 1" connection PN10, Max Kv [6,3 …7,5 M3] , Brass, Swivel design

Dirt and Magnetite Separator with DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 9,2 - 89,8 m3/h, with insulation

Dirt and Magnetite Separator with DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 9,2 - 89,8 m3/h, without insulated

Air and Microbubble Separator with DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 9,2 - 89,8 m3/h, with insulation

Air and Microbubble Seperator with DN 50 - DN 150 Flange PN 10, Max recommended flow rate Q 9,2 - 89,8 m3/h, without insulated

Dirt and Magnetite Separator with ¾", 1", 1¼", 1½" or 2" connection PN10, Max Kv [13,2 …73,1 M3] , Brass

Dirt and Magnetite Separator with Cu22, Cu28, ¾" and 1" connection PN10, Max Kv [6,3 …7,5 M3] , Brass, Swivel design

Water cooled chiller with refrigerant type R513A

Water cooled chiller with refrigerant type R134a

Chilled water production group, water/water with refrigerant type R1234ze

Water cooled chiller with refrigerant gas R454B

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems with automatic water-refilling. Max/min system pressure: +0,7 - 5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water. Max system vol: 50 m3

Vacuum degasser for removal of dissolved gasses in cooling and freezing systems down to -10C. Max/min system pressure: +0,7 - 5 bar, PN10. Temp. Range: -10C - +70C. . Allowed media: Water, Glycol mix, saline solution, etc.

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems. Max/min system pressure: +0,7 - 5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water, Ethanol. Max system vol: 50 m3

Vacuum degasser for removal of dissolved gasses in heating and comfort cooling systems. Max/min system pressure: +0,7 - 2,5 bar, PN10. Temp. Range: 0 – +70 °C. Allowed media: Water, Ethanol. Max system vol: 25 m3

Copper pipe according to DIN EN 1057

Suction nozzle for single pipe heating

Set of connector T-pieces for inlet and return flow, with union connector for Euro cone

Set of connector T-pieces for inlet and return flow

Set of connector T-pieces for return flow copper

Adaptor with female thread and plain end

Union

Axial expansion fitting with pressing sockets

Adaptor union nut

Adaptor union with male thread

Adaptor with female thread

Adaptor union with female thread

Anschluss with union nut

Adaptor with male thread and plain end

Adaptor with male thread

Adaptor with plain end and weld-on

Flange PN 10, with pressing socket

Flange PN 16, with pressing socket

T-piece with female thread and plain ends

Cross reduced

Cross reduced, offset

Cap

Cross 30° reduced

Bend 45°

Elbow adaptor 90° with male thread

Bend with plain ends 90°

Elbow adaptor 90° with female thread

Bend adaptor 90° with female thread

Bend 90°

T-piece reduced

Pipe bridge

Bend with plain end 45°

T-piece equal

T-piece with female thread

Bend with plain end 90°

Bend adaptor 90° with male thread

Axial expansion fitting with pressing sockets

Coupling

Corner elbow connector 90°

Pipe nipple outside zinc-plated

Slip coupling

System pipe plastic-jacketed, small bundle